Catalyst 8.61.1-090330a (9.5 Beta)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by rflair, Apr 20, 2009.

Page 3 of 8
  1. mwpeck

    mwpeck Active Member

    Messages:
    87
    Likes Received:
    0
    GPU:
    EVGA GTX 295
    No noticeable change in TF2 performance (using an intense timedemo, average FPS stayed 48 going from 9.4 to 9.5)....but I think the CPU limitation issues TF2 has is holding it back.....my GPU maxes out at maybe 80% utilization (I have it limited to 80 FPS, but even when it drops it doesn't max my GPU).

    Other than that they don't seem any worse than 9.4, so no point (for me at least) to roll back to 9.4
     
    mwpeck, Apr 21, 2009
    #41
  2. ForgedReality

    ForgedReality Master Guru

    Messages:
    216
    Likes Received:
    0
    GPU:
    HD4870x2OC + 9600GT PhysX
    Hmm.. These obviously run the same core as the 9.4s. They fixed the powerplay bug, which is good, but they still run a few degrees hotter than the 9.3s for some reason, just like the 9.4s did. It's around a 5-9 degree difference. Quite considerable. This is even at idle.
     
    ForgedReality, Apr 21, 2009
    #42
  3. WhiteLightning

    WhiteLightning Don Illuminati Staff Member

    Messages:
    30,851
    Likes Received:
    4,021
    GPU:
    Inno3d RTX4070
    i coudnt get the memory clock past 975 btw. any higher, and the clock was still at 975. so still something to be fixed still.
     
    WhiteLightning, Apr 21, 2009
    #43
  4. The General

    The General Guest

    Messages:
    3,108
    Likes Received:
    5
    GPU:
    FirePro W5000 2GB
    Thanks for the vista drivers, will install laterz. :)
     
    The General, Apr 21, 2009
    #44

  5. Gurid

    Gurid Member Guru

    Messages:
    152
    Likes Received:
    0
    GPU:
    2x Sapphire Radeon 4870
    So what about preformances ?
    How is F.E.A.R 2 ?
    and COD4? and COD 5?
    GRID ?
    And so on ?
     
    Gurid, Apr 21, 2009
    #45
  6. !H'Guru

    !H'Guru Guest

    Messages:
    507
    Likes Received:
    0
    GPU:
    Inno3D RTX 4090
    @ WhiteLightning, The same here. Vertical stripes on both screens. I think I'm going to try to roll back to the original 9.4...
     
    !H'Guru, Apr 21, 2009
    #46
  7. Gurid

    Gurid Member Guru

    Messages:
    152
    Likes Received:
    0
    GPU:
    2x Sapphire Radeon 4870
    Why isn't the temp bug fixed yet?
    Seem like 9.3 had much lower temps compare to this one.

    Not good for OC.
     
    Gurid, Apr 21, 2009
    #47
  8. Witcher

    Witcher Guest

    Messages:
    384
    Likes Received:
    0
    GPU:
    Intel
    Is it just me or the catalyst 9.1 and up increase the temperature of GPU. My GPU was running at 31-34 Degrees idle on catalyst 8.12 and on 9.1 and up, temps increased to 40-41 Degrees idle.
     
    Witcher, Apr 21, 2009
    #48
  9. MadGizmo

    MadGizmo Guest

    Messages:
    1,396
    Likes Received:
    0
    GPU:
    MSI R9 290X 8GB 2560*1440
    If this really fixes the 2D/3D bug then I am gonna try these as soon as I get home. :)

    Thanks for posting.
     
    MadGizmo, Apr 21, 2009
    #49
  10. Gurid

    Gurid Member Guru

    Messages:
    152
    Likes Received:
    0
    GPU:
    2x Sapphire Radeon 4870
    What is the 2D/3D bug every one it talking about ???

    Also,
    Why the temps are so high here ? compare to other drivers? (at least in idle mode)
     
    Gurid, Apr 21, 2009
    #50

  11. !H'Guru

    !H'Guru Guest

    Messages:
    507
    Likes Received:
    0
    GPU:
    Inno3D RTX 4090
    Yes, my temperatures are also up, and my whole system is unstable.
     
    !H'Guru, Apr 21, 2009
    #51
  12. rflair

    rflair Don Coleus Staff Member

    Messages:
    4,949
    Likes Received:
    1,819
    GPU:
    5700XT
    You have a massive overclock on your video card there, it actually runs Furmark at those speeds or even ATItool artifact tester?
     
    rflair, Apr 21, 2009
    #52
  13. saec

    saec Guest

    Vista Home Premium x64 SP1
     
    saec, Apr 21, 2009
    #53
  14. lolabean

    lolabean Banned

    Messages:
    17
    Likes Received:
    0
    GPU:
    4850
    Thanks for these :)
     
    lolabean, Apr 21, 2009
    #54
  15. !H'Guru

    !H'Guru Guest

    Messages:
    507
    Likes Received:
    0
    GPU:
    Inno3D RTX 4090
    @ Rflair, I had to back it op to stock in order to maintain stability. I even had to decrease the memory clocks to 800! Really strange. After I rolled back to the WHQL 9.4 everything was back to normal.
     
    !H'Guru, Apr 21, 2009
    #55

  16. rflair

    rflair Don Coleus Staff Member

    Messages:
    4,949
    Likes Received:
    1,819
    GPU:
    5700XT
    Can someone running Vista x64 and a 2000 or 3000 series card try the modified inf below.

    Edit: Link deleted.
     
    Last edited: Apr 21, 2009
    rflair, Apr 21, 2009
    #56
  17. The General

    The General Guest

    Messages:
    3,108
    Likes Received:
    5
    GPU:
    FirePro W5000 2GB
    Can someone mod them to work with Vista 32bit using a HD2400HD?
     
    The General, Apr 21, 2009
    #57
  18. rflair

    rflair Don Coleus Staff Member

    Messages:
    4,949
    Likes Received:
    1,819
    GPU:
    5700XT
    I wonder if its more a Rivatuner issue with these newer drivers. Your sig suggest you are using RT for volt mods.
     
    rflair, Apr 21, 2009
    #58
  19. Funky Doodle

    Funky Doodle Guest

    Messages:
    795
    Likes Received:
    0
    GPU:
    Gigabyte ATI HD 5830 1GB
    will wait for official, vista x64!
     
    Funky Doodle, Apr 21, 2009
    #59
  20. hallryu

    hallryu Don Altobello

    Messages:
    11,381
    Likes Received:
    15
    GPU:
    2x HD7970
    You got PM.
     
    hallryu, Apr 21, 2009
    #60
Page 3 of 8

Share This Page