who helps me to understand rivatuner

Discussion in 'RivaTuner Advanced Discussion forum' started by alco, Nov 20, 2005.

  1. alco

    alco Master Guru

    Messages:
    933
    Likes Received:
    0
    GPU:
    Asus gtx780 DirectcuII OC
    1st of all thx for this wonderfull program unwinder
    i am shure you made the world a better place for some of us ;)


    now there is something i want to now about my card
    here is some info from rt.

    $ffffffffff NVIDIA VGA BIOS information
    $ffffffffff ---------------------------------------------------
    $1100000000 Title : NVIDIA GeForce 6800 GT VGA BIOS
    $1100000002 Version : 5.40.02.38
    $1100000100 BIT version : 1.00
    $1100000200 Core clock : 200MHz
    $1100000201 Memory clock : 600MHz
    $1100010000 Perf. level 0 : 350MHz/500MHz/1.30V/100%
    $1100010001 Perf. level 1 : 350MHz/500MHz/1.40V/100%
    $1100020000 VID bitmask : 00000011b
    $1100020100 Voltage level 0 : 1.10V, VID 00000000b
    $1100020101 Voltage level 1 : 1.30V, VID 00000010b
    $1100020102 Voltage level 2 : 1.40V, VID 00000001b
    $1100000003 SW masked units : none

    can i make up from this that my card should do 400 core and 1200 memory ?
    i can make the core to 400 with no problems but the memory is holding me back
    got the card wc so temps on the core r no problems

    what i wanna know is how can i (if it isn't already) see or make my card run @ 1.4 volt
    to c if it helps the overclocking
    i have read alot of treaths about riva tuner
    but i think my english isn't good enough to fully understand all the subjects being discussed about it

    so my 2 questions r
    1- how to change the voltage (if needed) i think i do
    2- can i c at what voltage my card is running in 3d mode
    hope you guys/girls can help me out

    tia DSP
     
  2. alco

    alco Master Guru

    Messages:
    933
    Likes Received:
    0
    GPU:
    Asus gtx780 DirectcuII OC
    i just played a little with nibitor
    i think my gpu run at 1.4v in 3d
    but i can change the voltage acording to the voltage table
    to 1.6v
    is 1.6 still a safe voltage or wil it fry the card

    let me know
    thx
     
  3. IbSta

    IbSta New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    ASUS N6200 256 DDR OC!
    1.6 is pretty damn dangerous basically your risking your card at that point
     
  4. alco

    alco Master Guru

    Messages:
    933
    Likes Received:
    0
    GPU:
    Asus gtx780 DirectcuII OC
    *bump*

    can someone take a look at the dump of my bios like above
    and give me some details



    @IbSta so you think i shouldn't try 1.6 volts
    there was also 1 more choice but that looked something like ?.?
     

  5. DrSiN

    DrSiN Ancient Guru

    Messages:
    3,175
    Likes Received:
    0
    GPU:
    GeForce GTX 560 Ti OC 1G
    it should be 1.5
     

Share This Page