1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Titan X Voltage Unlock

Discussion in 'MSI AfterBurner Overclock Application Discussion' started by JezJ, Sep 30, 2015.

  1. JezJ

    JezJ New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    EVGA Titan X
    Hi All,

    I cant seem to get the voltage limit unlocked. Is this an issue with the current AB?

    Max voltage is 1.224v, I have a custom bios up to 1.3v but cannot go past the old max.

    If I run a different bios with a fixed voltage over 1.224 it displays correctly (used one with 1.275v)

    I added VDDC_Generic_Detection = 1 in the .cfg file to unlock it, but this didn't make any difference.
     
    Last edited: Sep 30, 2015
  2. Veteran

    Veteran Ancient Guru

    Messages:
    12,105
    Likes Received:
    19
    GPU:
    2xTitan XM@1590Mhz-CH20
    You cannot go any higher than what you already have unless you do a hard mod or The Pencil mod.
    Im gonna do the pencil mod myself when i get a bit of spare time.
     
  3. Pale Rider

    Pale Rider Active Member

    Messages:
    81
    Likes Received:
    0
    GPU:
    EVGA GTX 1080 Classified
  4. fantaskarsef

    fantaskarsef Ancient Guru

    Messages:
    10,555
    Likes Received:
    2,775
    GPU:
    1080Ti @h2o
    hehe decent, hope it turns out nicely :D
     

  5. Veteran

    Veteran Ancient Guru

    Messages:
    12,105
    Likes Received:
    19
    GPU:
    2xTitan XM@1590Mhz-CH20
    Yeah i need to get a multi meter to measure the current, worth doing if i can break 1600mhz which im sure i will.
     
  6. fantaskarsef

    fantaskarsef Ancient Guru

    Messages:
    10,555
    Likes Received:
    2,775
    GPU:
    1080Ti @h2o
    Certainly. What I remember you were at 1550 so far, should be only two or three bins until you hit the 1600s ;)
    Does the pencil thing only apply to the gpu voltage, or will it help with vram voltage too, probably helping vram oc?
     
  7. Veteran

    Veteran Ancient Guru

    Messages:
    12,105
    Likes Received:
    19
    GPU:
    2xTitan XM@1590Mhz-CH20
    Im at 1590 fully stable, its in my sig, wont go any higher on the core even after trying many different bioses.
    Not sure about the ram oc, i have my ram clocked at 650+ from stock.
     
  8. fantaskarsef

    fantaskarsef Ancient Guru

    Messages:
    10,555
    Likes Received:
    2,775
    GPU:
    1080Ti @h2o
    I'm not sure I get it right, but what I see the TX's (reference) have 1750MHz stock, meaning you have 2400MHz? Wow! Impressive :eek:
     
  9. Veteran

    Veteran Ancient Guru

    Messages:
    12,105
    Likes Received:
    19
    GPU:
    2xTitan XM@1590Mhz-CH20
    Yeah ive got a good card here, ive not seen any go as high as mine without using di,pc or Ln.
    My 690 used to do 500 on the memory and it had a low asic of 63. Titanx has an asic of 78.3
     
  10. cowie

    cowie Ancient Guru

    Messages:
    13,185
    Likes Received:
    278
    GPU:
    GTX
    op you should read the voltage with a dmm ab works just fine for what its advertised to do
    its starting to get chilly around here so I may fire up my modded tx's soon been using a 950 lately
     

Share This Page