Third party Graphics Card hardware database

Discussion in 'MSI AfterBurner Application Development Forum' started by Unwinder, May 30, 2015.

  1. Noname99

    Noname99 Guest

    Messages:
    1
    Likes Received:
    0
    GPU:
    Nvidia RTX 2060
    Tomatone please, can you help me? Afterburner voltage displays 0mv. I don't understand computers and I have the same problem. What code would I need for this laptop:
    • Processor Intel® Core i7-9750H (6 Núcleos, 12MB Caché, 2.6GHz - 4.5GHz, 64-bit)
    • Memory RAM DDR IV 8GB*2 (2666MHz)
    • 512GB NVMe PCIe SSD
    • Display 15.6" FHD (1920*1080), IPS-Level 120Hz Thin Bezel
    • Graphic controller RTX 2060, GDDR6 6GB
     
  2. v5000a

    v5000a Guest

    Messages:
    1
    Likes Received:
    0
    GPU:
    Asus GTX 1080 Strix
    Here is a entry for ASUS GTX 650 Ti DirectCU II for the one guy in the world that is still rocking this card. CHL8318 and after this entry seems to go up to 1.2V.

    Code:
    [VEN_10DE&DEV_11C6&SUBSYS_842C1043&REV_??]
    
    ; ASUS GTX 650 Ti DirectCUII
    
    Desc                                    = ASUS GTX 650 Ti DirectCUII
    VDDC_Generic_Detection                  = 0
    VDDC_CHL8318_Detection            = 44h
    VDDC_CHL8318_Type            = 1
     
  3. Hexidis

    Hexidis Guest

    Messages:
    4
    Likes Received:
    0
    GPU:
    EVGA 2070S KO
    Can someone please help me understand whether or not my GPU is included in third party or if i should just use reference or if it can be added to third party? I'm having a hard time. Here are all PCB specifications: https://www.techpowerup.com/review/evga-geforce-rtx-2070-super-ko/3.html

    Edit: So my GPU is not included in the text file, I'm just having trouble understanding whether or not it is supported and I can manually enter it. Any help would be greatly appreciated! If I'm simply in over my head should I just revert the setting back to MSI standard? Or does the dropdown have absolutely no effect if the card isn't supported so it doesn't matter?
     
    Last edited: Feb 17, 2021
  4. bourne

    bourne Guest

    Messages:
    1
    Likes Received:
    0
    GPU:
    GeForce GTX 770M
    Hi Unwinder,

    I have been slowly upgrading my iMac2011 21.5" sourcing parts for uni study/play and now at the final hurdle dealing with a problem with my graphics card.

    My system setup is as follows:
    System imac 21.5" mid 2011 (PSU 205W)
    CPU: i7-2600s
    GPU: GeForce GTX 770M Nick[D]vB vbios
    Mem: 16GB
    SSD: 500GB EVO (NO DVDR)
    OS: Win10H2

    I've had issues where under medium-heavy gaming load the GPU cycles from max/min 850MHz/300MHz. I suspect the GPU clock is either thermal throttling or maxing out PSU.

    I am using the MSI AfterBurner app so I can underclock the GPU but I have NO curve editor option and hence voltage control.

    The I2C dump reveals something at I2C bus 3 address 40h but there isn't any register values corresponding to the voltage controllers in the description.

    Code:
    Scanning GPU VEN_10DE&DEV_11E0&SUBSYS_05AA1028&REV_A1&BUS_1&DEV_0&FN_0...
    Scanning I2C bus 0...
    Probing device 40...
    Invalid device
    Scanning I2C bus 1...
    Probing device 40...
    Invalid device
    Scanning I2C bus 2...
    Probing device 40...
    Invalid device
    Scanning I2C bus 3...
    Probing device 40...
    4E 06 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    4E 05 2E 00 00 00 00 7F 1F 7F 7F 7F 7F 01 7F 40
    27 23 FF FF FF FF FF FF FF FF -- F8 FF FF 54 32
    Scanning I2C bus 4...
    Probing device 40...
    Invalid device
    Scanning GPU VEN_8086&DEV_0102&SUBSYS_20108086&REV_09&BUS_0&DEV_2&FN_0...
    
    Can you please help me to understand if there is any way to unlock the voltage control for this GPU and what to do apply in the .oem file.

    Thank you in advance.
     
    Last edited: May 2, 2021

  5. Unwinder

    Unwinder Ancient Guru Staff Member

    Messages:
    17,242
    Likes Received:
    6,994
    You absolutely cannot unlock the v/f curve this way. It is GPU architecture specific _driver_ feature, which is only supported in Pascal and newer GPUs.
     
  6. iVasia

    iVasia Guest

    Messages:
    8
    Likes Received:
    1
    GPU:
    RTX 3080 Ti
    AB.JPG
    Hey.. Any new graphic cards supported by third party voltage control in 2023?
     

Share This Page