Discussion in 'Die-hard Overclocking & Case Modifications' started by hallryu, Dec 13, 2011.
Sinda, I would love to know how you made that custom badge, looks very professional. How did you do it?
I make a custom logo first:
then cut a litle piece of plexiglas:
then sticker painted in my blue combo:
logo made of plexiglas painted in black with a bumper spray:
and finaly a custom black and blue logo
Top stuff Thanks for sharing that. Again, lovely rig and some great looking shots of it
My latest dual loop set-up nearly finished:
My I7 based beast LMAO
O and I hadn't finished the wiring on the rear rad fan's
Just a couple of pics (work in progress)
sorry for low quality pics i only have my phone.
I like the shade of blue. Cant wait to see the finished pics
Few updated pics of the rig. My goal was to eliminate as much un-used hardware and wiring as possible and make it easier to keep clean... sort of an OCD freak when it comes to dust in my machine.
ODD is gone, moved SSDs and HDD up to the 5.25” bays allowing removal of the 3.5” cages, H100 fans are now located on the outside of the case pulling air through the rad, and replaced the stock front fan with a BitFenix Spectre Pro.
Over all I’m very pleased with not only being able to better clean it (especially the fans and rad) but I like the look much better, not to mention a -3*c improvement on the CPU.
Made use of the old VR Icepacks for the SSDs mounting in the 5.25” bays and also removed the tool-less clips in favor of screws.
Very neat, clawhamer.
wow.. beaitful pics and clawhamer, perfect cable management
Still a work in progress, I call this rig "Red-rolock" lol. Still not done with the sleeving and wire management
Will add more red LEDs below for maximum red XD
My New Setup !
Core-i73820 @ Stock cooled by an H80.
Intel DX79TO MB
10.25 GB 1600Mhz CV Memory
2x6870 in crossfire @ 950 mhz core per card.
Case Zalman GS1000
Corsair HX850w psu.
Finally made the switch to Intel.. ! Case in the process of being modded. Will post more pics !
@Garaa you appear to have missing DIMMs! Lol
Here´s mine at the moment:
Hi folks, here's my setup! Hope you like it!
Case: Full Tower Thermaltake Armor+ VH600LBWS
CPU: Intel Core i7 920 D0 @ 4.30GHz (20x215)
Motherboard: Evga X58 SLI 132-BL-E758
RAM Memory: 3x 2GB DIMM DDR3 Tri-Channel Corsair Dominator GT 7-7-7-18-1T @ 1720Mhz
Graphics Cards: 2x ASUS GeForce GTX 670 Direct CUII 2048MB SLI @ 1254MHz/3206MHz
Case Front 1x 140mm, Exhaust 1x 120mm, Side 1x 230mm Fans
Pumps: 2x Swiftech MCP655 12VDC + EK D5 X-Top Rev.2
Tanks: 2x Thermaltake 530cc Refill Reservoir
Radiator1: Koolance EHX-1020SL 3x120mm Fan (Top)
Radiator2: Phobya G-Changer 2x120mm Fan (Bottom)
Tubing: Primochill PrimoFlex Pro LRT Clear 3/8'' ID
CPU Block: Swiftech Apogee XT
VREG-NB/SB Block: EK-FB Kit Evga X58 Acetal
GPU Blocks: 2x EK-FC670 GTX DCII Acetal+Nickel
SSD: OCZ Vertex 4 VTX4-25SAT3-256G 256GB (Boot)
Hard Drives: 2x Samsung Spinpoint F3 HD103SJ 1TB (Data+Backup)
Power Supply: Corsair AX850 Gold 850W
That case is ****.
You have an awesome system but it´s way too messy!! That case for that system... MEH!!
thnx case is 4 years old but does teh job