The AMD Ryzen All In One Tread /Overclocking/Memory Speeds & Timings/Tweaking/Cooling Part 2

Discussion in 'Processors and motherboards AMD' started by vbetts, Sep 24, 2018.

  1. gerardfraser

    gerardfraser Ancient Guru

    Messages:
    3,075
    Likes Received:
    621
    GPU:
    R9 290 Crossfire
    Yeah not very promising when one of the top motherboard makers in the world are not fully supporting the lineup for the life of the socket when there competitors are fully supporting the socket within reason,one conciliation for you is you do not need BIOS 1.0.0.4 for proper operation of the motherboard as it should work with older BIOS.
    I do understand why you would want the latest and greatest but in reality it does not bring anything special that is needed to run the motherboard.By special I mean performance improvements and you would you probably not like the decrease on the CPU clocks with BIOS 1.0.0.4.

    Hang in there,I bet they will release BIOS 1.0.0.4 within a month.
     
    OnnA likes this.
  2. OnnA

    OnnA Ancient Guru

    Messages:
    10,261
    Likes Received:
    2,232
    GPU:
    Vega 64 XTX LiQuiD
  3. OnnA

    OnnA Ancient Guru

    Messages:
    10,261
    Likes Received:
    2,232
    GPU:
    Vega 64 XTX LiQuiD
  4. OnnA

    OnnA Ancient Guru

    Messages:
    10,261
    Likes Received:
    2,232
    GPU:
    Vega 64 XTX LiQuiD
    Good upgrade over an 1700 OCed to 3.9Ghz (4.015 Max at 1.438v) ;)

     

  5. Mr. Sunshine

    Mr. Sunshine Member Guru

    Messages:
    177
    Likes Received:
    58
    GPU:
    SapphireNitro V64
    Anyone know the temp specs for Boost? Was running CB15/20 and noticed that if I stay under 69.5c all cores run at 4.125-4.150ghz. If I go above that they drop to 4.050-4.075ghz. Was wondering if there was a temp limit chart to know the threshold.

    On a side note Boost is 25-50mhz lower with new bios. Using same bios settings as before. These are peak boost....sustained clocks are roughly the same. CB single core score has went down 506-507 vs 510-511 on old bios. mutli core score is same (4900-4980)

    1.0.0.3 ABBA
    4 cores- 4.400-4.425ghz
    2 cores- 4.375-4.400ghz
    2 cores- 4.325-4.350ghz

    AGESA 1.0.0.4
    4 cores- 4.375ghz
    2 cores- 4.350ghz
    2 cores- 4.300ghz

    I can pull 4.40ghz if I leave voltage on auto but multi core performance goes down due to temps when loading all cores.
     
    Last edited: Dec 4, 2019
  6. Kool64

    Kool64 Master Guru

    Messages:
    513
    Likes Received:
    183
    GPU:
    Gigabyte GTX 1070
    3 of my cores still hit 4400 on 1.0.0.4(thought I'm not sure exactly how or when) 3 hit 4350 and 2 hit 4325. With what I think is the ABBA SMU on the 1.0.0.3 Stilt modified BIOS 4 cores hit 4400 and 3 hit 4375. Definitely some walking back of the boost going on there.
     
    Last edited: Dec 4, 2019
  7. AsiJu

    AsiJu Ancient Guru

    Messages:
    5,958
    Likes Received:
    1,306
    GPU:
    MSI RTX 2070 Armor
    Well that's bs, Asus pretty much putting X370 to EOL then.

    Granted ASRock haven't an official release with 1004B yet either but one was up for grabs from JZElektronik which is not stated as beta so as far as I can tell this is the to-be-official release (P5.65 / X370 Killer SLI).
     
  8. Kool64

    Kool64 Master Guru

    Messages:
    513
    Likes Received:
    183
    GPU:
    Gigabyte GTX 1070
    With ASRock if the number ends in anything but a zero it’s a beta.
     
  9. Hemisfear

    Hemisfear Member

    Messages:
    47
    Likes Received:
    25
    GPU:
    GTX 1080
    found this:

    AMD calculated their rated boost clocks at 50°C.
    Depending on the processor, maximum boost will go down with temperature:
    - 3900/3950 - 75 MHz per 10°C
    - 3800/3700 - 50 MHz per 10°C
    - 3600/3500 - 35 MHz per 10°C


    @K.S.
    prime x370-pro does have a test 5406 though and I saw a post by a Asus dude @hwluxx forums, that x370 is supposed to get 1004b in december

    on a sidenote:
    not even the Crosshair Vll has gotten 1.0.0.4b yet, and CH boards are supposed to be...
    [​IMG]
     
    Mr. Sunshine, K.S. and OnnA like this.
  10. liviut

    liviut Active Member

    Messages:
    93
    Likes Received:
    5
    GPU:
    Sapphire TRI-X R9 290
    i call this bullshit as in games my proc stays at 44-50 and 4075 or 4100 ryzen 5 3600
     

  11. AsiJu

    AsiJu Ancient Guru

    Messages:
    5,958
    Likes Received:
    1,306
    GPU:
    MSI RTX 2070 Armor
    Ok. Seems to work fine though.

    Guess the official will be 5.60 then or something.
     
  12. Clouseau

    Clouseau Ancient Guru

    Messages:
    2,441
    Likes Received:
    272
    GPU:
    ASUS STRIX GTX 1080
    Have noticed with 1004B and my X470-F Gaming through HWiNFO that Vcore voltage is a lot more sensitive to undervolting than previously. The actual CPU voltage setting in the bios with an offset of -0.0675, Vcore reaches 1.500v on all of the cores eventually and on multiple cores at the same time too. Have not done any testing past -0.0675 yet. Vcore of 1.5 was not reached up through offset of -0.0500.
     
  13. Mr. Sunshine

    Mr. Sunshine Member Guru

    Messages:
    177
    Likes Received:
    58
    GPU:
    SapphireNitro V64
    Same here. I have it set to .0500 now. That seems to give me best of both single and multi core boost. Any more than that seems like CPU doesnt get enough voltage to ramp up. And any less and CPU hits temp limits(70c)...clocking down 25-50mhz under multi core load.

    CB20 gives me :
    Single Core:506-508
    Multi Core:4950-4975
     
    Last edited: Dec 5, 2019
  14. Dazz

    Dazz Master Guru

    Messages:
    866
    Likes Received:
    89
    GPU:
    ASUS STRIX RTX 2080
    See i think your single core is not boosting high enough, i do CCX overclocking on my 3900X it the best way to squeeze the most out, so have 3x at 4.5GHz, 3x at 4.45Ghz, and 6x 4.3GHz and my single core score is 522 and use 1.38v, CPU-Z is 556pts single core
    https://valid.x86.fr/vfnqdn
     
  15. GREGIX

    GREGIX Master Guru

    Messages:
    574
    Likes Received:
    56
    GPU:
    MSI 1080 /AMD v7
    B450 tomahawk max, 3700x, 16gb ddr4 3777cl 15, PBO enhanced 4, CPU-Z benchmark shows 529/54** so not so bad.
    Do not have this PC now, it was completed for friend. 5700xt and all running smoothly.
     

  16. OnnA

    OnnA Ancient Guru

    Messages:
    10,261
    Likes Received:
    2,232
    GPU:
    Vega 64 XTX LiQuiD
    AGESA 1.0.0.4 BIOS for Hero VI + VII & WiFi

    CROSSHAIR VI HERO:
    0001
    http://www.hwinfo.com/beta/ASUS/CROSSHAIR-VI-HERO-ASUS-0001.7z
    http://www.hwinfo.com/beta/ASUS/ROG-CROSSHAIR-VI-HERO-WIFI-AC-ASUS-0001.7z

    CROSSHAIR VII HERO:
    0002
    http://www.hwinfo.com/beta/ASUS/ROG-CROSSHAIR-VII-HERO-ASUS-0002.7z
    http://www.hwinfo.com/beta/ASUS/ROG-CROSSHAIR-VII-HERO-WIFI-ASUS-0002.7z

    :p -> https://www.overclock.net/forum/11-...vii-overclocking-thread-260.html#post28224308

    Computer is notch faster & more responsive.
    Overall AGESA 1004 is better IMhO.

    Note/Advise:
    Do not import settings from other versions !
    Write the Values and enter manually after Flashing.

    [​IMG]
     
    Last edited: Dec 6, 2019
    Hemisfear likes this.
  17. Mr. Sunshine

    Mr. Sunshine Member Guru

    Messages:
    177
    Likes Received:
    58
    GPU:
    SapphireNitro V64
    Our 3900X has better binning...My 3700X has never clocked higher than 4.425ghz @ 1.45v even with manual OCing.
     
    Last edited: Dec 5, 2019
  18. Kool64

    Kool64 Master Guru

    Messages:
    513
    Likes Received:
    183
    GPU:
    Gigabyte GTX 1070
    my 3700X barely makes it to 4400 and has never gone past that. Some of that could be my use of the Wraith Prism but temps are always good so I don't really know.
     
  19. Mr. Sunshine

    Mr. Sunshine Member Guru

    Messages:
    177
    Likes Received:
    58
    GPU:
    SapphireNitro V64
    I never really had any luck manual OCing. Like I said 4.425ghz was max:

    CCX-0
    C1-4425
    C2-4375
    C3-4375
    C4-4425

    CCX-1
    C5-4350
    C6-4425
    C7-4350
    C8-4440

    All core 4.4ghz @ 1.48v but it was hot and I never tested stability.
    I was able to run CCX-0 @ 4.375ghz and CCX-1 @ 4.300ghz @ 1.38v stable. But was getting same performance as PBO.

    Binning isnt as good for 3700X. I never pushed past 1.48v either.
     
  20. Hemisfear

    Hemisfear Member

    Messages:
    47
    Likes Received:
    25
    GPU:
    GTX 1080
    dude.. 1.48V allcore?
     
    OnnA likes this.

Share This Page