1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SweetFX Shader Suite release and discussion thread #3

Discussion in 'Games, Gaming & Game-demos' started by CeeJay.dk, Mar 18, 2013.

Thread Status:
Not open for further replies.
  1. marcosamerio

    marcosamerio Master Guru

    Messages:
    686
    Likes Received:
    1
    GPU:
    EVGA NVIDIA 680 GTX
    ¿Anyone can tell me how to enable SweetFX on Killing Floor please?

    Thanks a lot.

    Bye, Marcos
     
  2. fwee

    fwee Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    660 Ti @1111MHz
    can someone tell me how to get dota 2 working on my windows 8? i put the dxdg9.dll into the bin folder and everything else into the root exe for dota.

    im on windows 8 x64 and it crashes on load without the game popping put it messes with resolutions before it does. am i missing a redistributable for x32 bit or is it something else.
    does dota 2 run x64?
     
  3. JPulowski

    JPulowski Active Member

    Messages:
    84
    Likes Received:
    0
    GPU:
    NVIDIA GeForce GTX 690
    I don't know if it's possible but I have an idea. Let's just say I have an average pc. I can run a game in 720p, but when I select 1080p performance gets low. So here is the question, would it be possible to launch the game in 720p but resizing it to 1080p via shaders. Or let's just say there is a game that only supports resolutions up to 720p. And there is no tweak/advanced method to launch it 1080p. What I mean is similar to madVR. So it takes the original image and resizes it via various algorithms in realtime. Graphics card and monitor can already do that I know, but let's just face it it is so blurry. I think it should be possible. Can anyone enlighten me on the subject? Thanks.
     
  4. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    This is what HiAlgo does.
     

  5. JPulowski

    JPulowski Active Member

    Messages:
    84
    Likes Received:
    0
    GPU:
    NVIDIA GeForce GTX 690
    Yeah, I know but that's not exactly what I meant. HiAlgo does it dynamically. What I mean is something like this for example:
    Code:
    SweetFX_settings.txt
    ...
    ***Resize***
    Original_Resolution=1280,720
    Resized_Resolution=1920,1080
    Resize_Algorithm=Lanczos / Jinc / Catmull-Rom / Bicubic / Nearest Neighbor / ...
    It's not designed for performance but simply for resizing.
     
  6. Marcel

    Marcel Maha Guru

    Messages:
    1,141
    Likes Received:
    0
    GPU:
    MSI GTX 1070 Gaming
    Thank you very much for answer. I'll be waiting
     
  7. 007.SirBond

    007.SirBond Master Guru

    Messages:
    295
    Likes Received:
    0
    GPU:
    NVIDIA GTX Titan 6GB
    No it doesn't use x64, it is 32bit. I can run it no problems using Boulotaur2024's version. If you are using 1.4 Ceejay's version. You have to disable ingame AA in order for it to work.

    Try disabling Steam overlay as well.
     
  8. fwee

    fwee Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    660 Ti @1111MHz
    idk what im missing. im useing boulotaurs and i put the dxdg9 into the bin and thats all. i also tried the injector for the injector.ini and no luck. anyone? maybe help me through soemthing like teamviewer?
     
  9. 007.SirBond

    007.SirBond Master Guru

    Messages:
    295
    Likes Received:
    0
    GPU:
    NVIDIA GTX Titan 6GB
    Do not use the injector.ini from Ceejay's version, it is not needed and causes the crash. Only use the files that comes with boulotaur's version.
     
  10. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    No it doesn't.

    It's just ignored by Boulotaurs injector.
     

  11. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    What does your log.log say?

    Don't have one? Then it's a problem with access rights to the folder.
    Try running as administrator if that is the case.
     
  12. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    TXAA requires game support. It cannot be applied by SweetFX.
    And even if it could it's not open-source.
     
  13. fwee

    fwee Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    660 Ti @1111MHz

    Code:
     [18:46:48] Redirecting CreateDevice : successful (width: 1280, height: 1024)
     [18:46:48] Couldn't open 'd:\program files (x86)\steamlibrary\steamapps\common\dota 2 beta\bin\SweetFX_settings.txt'... Exiting
     [18:46:48] No 'SweetFX_settings.txt' file found. Quitting.
    I got that error so i proceeded to move the file it asked for to the bin folder with the dxdg9.dll. it then asked me to another file so i just dumped sweetfx into there aswell and it worked.

    these are the best settings ive found and been using them for all my games
    they are BF3 Natural lighting 1.1
    Code:
       /*-----------------------------------------------------------.   
      /                       Description                           /
      '------------------------------------------------------------/
    
    Game: Any
    SweetFX version: 1.4
    Author: CeeJay.dk
    Description: 
    
    These are the default settings for SweetFX 1.4
    They smoothen jagged edges with SMAA anti-aliasing, sharpen the image with LumaSharpen and make the colors slightly more vibrant with Vibrance.
    
    Please note when tweaking settings that higher numbers does not always equal better (nor does lower).
    Finding the best settings for your game and your taste is about finding just the right amount to apply.
    
    If you made a good setttings preset please share it with your friends, on forums and websites,
    and/or submit it to the SweetFX Settings Database : http://sfx.thelazy.net/games/
    
       /*-----------------------------------------------------------.
      /                      Choose effects                         /
      '-----------------------------------------------------------*/
    
    // Set to 1 for ON or 0 for OFF
    #define USE_SMAA_ANTIALIASING 1 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
    #define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. WIP - Currently only works in DX9 and you need to use the FXAA injector dlls.
    #define USE_CARTOON       1 //[0 or 1] Cartoon : "Toon"s the image. (Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen)
    #define USE_TVLEVELS      1 //[0 or 1] TVLevels : Adjusts the brightness/darkness of the scene with a straight line instead of a curve.
    #define USE_ADVANCED_CRT  0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (Interferes with SMAA, Cartoon, Bloom, HDR and Lumasharpen, and it has a very high performance cost) 
    #define USE_BLOOM         1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
    #define USE_HDR           0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
    #define USE_LUMASHARPEN   1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
    #define USE_TECHNICOLOR   0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
    #define USE_DPX           0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
    #define USE_MONOCHROME    0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
    #define USE_LIFTGAMMAGAIN 1 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping)
    #define USE_TONEMAP       1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
    #define USE_VIBRANCE      1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
    #define USE_CURVES        1 //[0 or 1] Curves : Contrast adjustments using S-curves.
    #define USE_SEPIA         0 //[0 or 1] Sepia : Sepia tones the image.
    #define USE_VIGNETTE      0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
    #define USE_DITHER        1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
    #define USE_BORDER        1 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes.
    #define USE_SPLITSCREEN   0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode.
    
    
       /*-----------------------------------------------------------.
      /                  SMAA Anti-aliasing settings                /
      '-----------------------------------------------------------*/
    
    #define SMAA_THRESHOLD 0.08           //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
    #define SMAA_MAX_SEARCH_STEPS 16      //[0 to 98] Determines the radius SMAA will search for aliased edges
    #define SMAA_MAX_SEARCH_STEPS_DIAG 6  //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges
    #define SMAA_CORNER_ROUNDING 0        //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default.
    
    // -- Advanced SMAA settings --
    #define COLOR_EDGE_DETECTION 1        //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster)
    #define SMAA_DIRECTX9_LINEAR_BLEND 0  //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.
                                          //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card.
    
       /*-----------------------------------------------------------.
      /                  FXAA Anti-aliasing settings                /
      '-----------------------------------------------------------*/
    #define FXAA_QUALITY__PRESET 9       //[1 to 9] Choose the quality preset. 9 is the highest quality.
    #define fxaa_Subpix 0.400            //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal.
    #define fxaa_EdgeThreshold 0.250     //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm.
    #define fxaa_EdgeThresholdMin 0.060  //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks.
    
    
       /*-----------------------------------------------------------.
      /                      Cartoon settings                       /
      '-----------------------------------------------------------*/
    #define CartoonPower 0.30             //[0.1 to 10.0] Amount of effect you want.
    
    
       /*-----------------------------------------------------------.
      /                      TVLevels settings                      /
      '-----------------------------------------------------------*/
      #define DARK_LEVEL 16.0				//[0 to 255] Darkness strength. Higher values mean darker shadows, 0 means no change. Default is 16.0
    #define BRIGHT_LEVEL 13.0		//[0 to 255] Brightness strength. Higher values mean brighter lights, 0 means no change. Default is 20.0
    
    
       /*-----------------------------------------------------------.
      /                    Advanced CRT settings                   /
      '----------------------------------------------------------*/
    #define CRTAmount            1.00    //[0.00 to 1.00]  Amount of CRT effect you want
    
    #define CRTResolution        1.2     //[1.0 to 8.O]    Input size coefficent (low values gives the "low-res retro look"). Default is 1.2
    #define CRTgamma             2.4     //[0.0 to 4.0]    Gamma of simulated CRT (default 2.4)
    #define CRTmonitorgamma      2.2     //[0.0 to 4.0]    Gamma of display monitor (typically 2.2 is correct)
    #define CRTBrightness        1.0     //[1.0 to 3.0]    Used to boost brightness a little. Default is 1.0
    #define CRTScanlineIntensity 2.0     //[2.0 to 4.0]    Scanlines intensity (use integer values preferably). Default is 2.0
    #define CRTScanlineGaussian  1       //[0 or 1]        Use the "new nongaussian scanlines bloom effect". Default is on
    
    #define CRTCurvature         1       //[[0 or 1]          "Barrel effect" enabled (1) or off (0)
    #define CRTCurvatureRadius   1.5     //[0.0 to 2.0]       Curvature Radius (only effective when Curvature is enabled). Default is 1.5
    #define CRTCornerSize        0.0010  //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001
    #define CRTDistance          2.00    //[0.00 to 4.00]     Simulated distance from viewer to monitor. Default is 2.00
    #define CRTAngleX            0.00    //[-0.20 to 0.20]    Tilt angle in radians (X coordinates)
    #define CRTAngleY            -0.10   //[-0.20 to 0.20]    Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look)
    #define CRTOverScan          1.01    //[1.00 to 1.10]     Overscan (e.g. 1.02 for 2% overscan). Default is 1.01
    #define CRTOversample        0       //[0 or 1]           Enable 3x oversampling of the beam profile (warning : performance hit)
    
       /*-----------------------------------------------------------.
      /                       Bloom settings                        /
      '-----------------------------------------------------------*/
    #define BloomThreshold 23.15 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
    #define BloomPower 1.33     //[0.000 to 8.000] Strength of the bloom
    #define BloomWidth 0.0142    //[0.0000 to 1.0000] Width of the bloom
    
    
       /*-----------------------------------------------------------.
      /                        HDR settings                         /
      '-----------------------------------------------------------*/
    #define HDRPower 1.30  //[0.00 to 8.00] Strangely lowering this makes the image brighter
    #define radius2  0.87  //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter
    
       /*-----------------------------------------------------------.
      /                     LumaSharpen settings                    /
      '-----------------------------------------------------------*/
    // -- Sharpening --
    #define sharp_strength 1.45   //[0.10 to 3.00] Strength of the sharpening
    #define sharp_clamp    0.07  //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035
    
    // -- Advanced sharpening settings --
    #define pattern 2        //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
    #define offset_bias 1.0  //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern.
                             //I designed the pattern for offset_bias 1.0, but feel free to experiment.
                               
    // -- Debug sharpening settings --
    #define show_sharpen 0   //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better)
    
    
       /*-----------------------------------------------------------.
      /                      TECHNICOLOR settings                   /
      '-----------------------------------------------------------*/
    #define TechniAmount 0.4         //[0.00 to 1.00]
    #define TechniPower  4.0         //[0.00 to 8.00]
    #define redNegativeAmount   0.88 //[0.00 to 1.00]
    #define greenNegativeAmount 0.88 //[0.00 to 1.00]
    #define blueNegativeAmount  0.88 //[0.00 to 1.00]
    
    
       /*-----------------------------------------------------------.
      /                      Cineon DPX settings                    /
      '-----------------------------------------------------------*/
    #define Red   8.0  //[1.0 to 15.0]
    #define Green 8.0  //[1.0 to 15.0]
    #define Blue  8.0  //[1.0 to 15.0]
    
    #define ColorGamma    1.5  //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
    #define DPXSaturation 7.0  //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.
    
    #define RedC   0.36  //[0.60 to 0.20]
    #define GreenC 0.36  //[0.60 to 0.20]
    #define BlueC  0.34  //[0.60 to 0.20]
    
    #define Blend 0.02    //[0.00 to 1.00] How strong the effect should be.
    
    
       /*-----------------------------------------------------------.
      /                      Monochrome settings                    /
      '-----------------------------------------------------------*/
    #define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00)
    
    
       /*-----------------------------------------------------------.
      /                      Lift Gamma Gain settings               /
      '-----------------------------------------------------------*/
    #define RGB_Lift  float3(0.951, 0.990, 0.950)  //[0.000 to 2.000] Adjust shadows for Red, Green and Blue
    #define RGB_Gamma float3(0.951, 0.990, 0.970)  //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
    #define RGB_Gain  float3(1.035, 1.030, 1.080)  //[0.000 to 2.000] Adjust highlights for Red, Green and Blue
    
    
       /*-----------------------------------------------------------.
      /                        Tonemap settings                     /
      '-----------------------------------------------------------*/
    #define Gamma 1.02        //[0.000 to 2.000] Adjust midtones
    
    #define Exposure 0.00    //[-1.000 to 1.000] Adjust exposure
    
    #define Saturation 0.30  //[-1.000 to 1.000] Adjust saturation
    
    #define Bleach 0.00      //[0.000 to 1.000] Brightens the shadows and fades the colors
    
    #define Defog 0.0025 //[0.000 to 1.000] How much of the color tint to remove
    #define FogColor float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue
    
    
       /*-----------------------------------------------------------.
      /                       Vibrance settings                     /
      '-----------------------------------------------------------*/
    #define Vibrance 0.13 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
    
    
       /*-----------------------------------------------------------.
      /                        Curves settings                      /
      '-----------------------------------------------------------*/
    #define Curves_mode 0        //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
    #define Curves_contrast 0.55 //[-1.00 to 1.00] The amount of contrast you want
    
    // -- Advanced curve settings --
    #define Curves_formula 2     //[1|2|3|4|5|6|7|8|9] The contrast s-curve you want to use.
                                 //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
                                 //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola.
                                 //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
                                 //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.
                                 
       /*-----------------------------------------------------------.
      /                         Sepia settings                      /
      '-----------------------------------------------------------*/
    #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image
    #define GreyPower  0.11                    //[0.00 to 1.00] How much desaturate the image before tinting it
    #define SepiaPower 0.58                    //[0.00 to 1.00] How much to tint the image
    
    
       /*-----------------------------------------------------------.
      /                       Vignette settings                     /
      '-----------------------------------------------------------*/
    #define VignetteRatio 1.00    //[0.15 to 6.00]  Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high.
    #define VignetteRadius 1.00   //[-1.00 to 3.00] lower values = stronger radial effect from center
    #define VignetteAmount -1.00  //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White.
    #define VignetteSlope 8       //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
    #define VignetteCenter float2(0.500, 0.500)  //[0.000 to 1.000, 0.000 to 1.000] Center of effect.
    
    
       /*-----------------------------------------------------------.
      /                        Dither settings                      /
      '-----------------------------------------------------------*/
    #define dither_method 1  //[1 or 2] 1 = Ordering dithering (good and very fast), 2 = Random dithering (even better dithering but not as fast)
    
    //Note that the patterns used by Dither, makes an image harder to compress.
    //This can make your screenshots and video recordings take up more space.
    
    
       /*-----------------------------------------------------------.
      /                        Border settings                      /
      '-----------------------------------------------------------*/
    //No settings yet, beyond switching it on or off in the top section.
    
    
       /*-----------------------------------------------------------.
      /                     Splitscreen settings                    /
      '-----------------------------------------------------------*/
    #define splitscreen_mode 1  //[1|2|3|4|5]  1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split
    
    
     
    Last edited: Sep 30, 2013
  14. 007.SirBond

    007.SirBond Master Guru

    Messages:
    295
    Likes Received:
    0
    GPU:
    NVIDIA GTX Titan 6GB
    You have something called USE_TVLEVELS.

    I don't have that effect option in 1.4 or Boulotaurs. Where did you get your SweetFX version?
     
  15. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    Good news everyone!

    I have released a new SweetFX version : 1.5

    This means I have created a new discussion thread here : http://forums.guru3d.com/showthread.php?t=381912
    and I will message Hilbert (the Guru3D top admin) to update the Guru3D mirror and close this thread.

    See you in the new thread ! :)
     
    Last edited: Sep 30, 2013

  16. dante3

    dante3 New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Asus ENGTX560 Ti DCII 1gb
    ArcaniA - Gothic4

    SweetFX version: 1.4

    #define USE_SMAA_AA 1 //[0 or 1] = THRESHOLD 0.08 - STEPS 98 - STEPS_DIAG 16
    #define USE_CARTOON 0 //[0 or 1] =
    #define USE_ADVANCED_CRT 0 //[0 or 1] =
    #define USE_BLOOM 1 //[0 or 1] = BloomThreshold 23.75 - BloomPower 1.500
    #define USE_HDR 1 //[0 or 1] = HDRPower 1.00 - Radius2 0.78
    #define USE_LUMASHARPEN 1 //[0 or 1] = Sharp_strength 0.80 - Sharp_clamp 0.100 - offset_bias 1.0
    #define USE_TECHNICOLOR 0 //[0 or 1] =
    #define USE_DPX 0 //[0 or 1] =
    #define USE_MONOCHROME 0 //[0 or 1] =
    #define USE_LIFTGAMMAGAIN 0 //[0 or 1] =
    #define USE_TONEMAP 0 //[0 or 1] =
    #define USE_VIBRANCE 1 //[0 or 1] = Vibrance 0.34
    #define USE_CURVES 1 //[0 or 1] = Curves_contrast 0.60 - Curves_mode 0
    #define USE_SEPIA 0 //[0 or 1] =
    #define USE_VIGNETTE 0 //[0 or 1] =
    #define USE_DITHER 1 //[0 or 1] = Dither_method 2
    #define USE_BORDER 0 //[0 or 1] =
    #define USE_SPLITSCREEN 0 //[0 or 1] =

    [​IMG]

    [​IMG]
     
  17. PG01

    PG01 New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    GTX 760
    Doesn't work in BF4. Didn't really expect it to but there we are, talking about 64 bit version btw, the game only comes in x64.
    If it helps here's the log

    Code:
     [17:43:53] D3D11CreateDeviceAndSwapChain failed: 00000000887A0004 !
     [17:43:53] D3D11CreateDeviceAndSwapChain redirected successfully
     [17:43:53] Hooking swapchain...
     [17:43:53] ResizeBuffers succeeded !
     [17:43:53] Created DeferredContext successfully !
     [17:43:53] Unable to load 'FXAA_DX11.fx': ..\..\SweetFX_settings.txt(67,31): warning X1519: 'FXAA_QUALITY__PRESET' : macro redefinition
    FXAA.h(1001,33): error X3004: undeclared identifier 'FXAA_QUALITY__P0'
     
  18. fwee

    fwee Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    660 Ti @1111MHz
    can someone tell me how to get it to work on bf4 beta? its not working. am using 1.5 am on 64 bit
     
  19. Radical_53

    Radical_53 Ancient Guru

    Messages:
    3,806
    Likes Received:
    37
    GPU:
    Aorus 1080 TI
    Boulotaur's injector works fine with the BF4 beta.
     
Thread Status:
Not open for further replies.

Share This Page