1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SweetFX Shader Suite release and discussion thread #3

Discussion in 'Games, Gaming & Game-demos' started by CeeJay.dk, Mar 18, 2013.

Thread Status:
Not open for further replies.
  1. TCPIP

    TCPIP Active Member

    Messages:
    67
    Likes Received:
    0
    GPU:
    AMD Radeon R9 290
    Thanks CJ, it worked, looks awful though, i hoped it to have a better effect than "add some ugly black areas(like ripped outlines) around the whites"
     
  2. ACMPraetorian

    ACMPraetorian Member Guru

    Messages:
    101
    Likes Received:
    0
    GPU:
    Sapphire HD 7950 OC
    Sorry for asking, But which controls each colour?

    I'm new to editing in SweetFX, Usually I just downloaded custom presets before I decided to make a preset for ACM lol.
     
  3. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    Screenshot please.
     
  4. CeeJay.dk

    CeeJay.dk Master Guru

    Messages:
    689
    Likes Received:
    8
    GPU:
    Radeon 6870
    (1.000, 1.000, 1.000) = Red, Green and Blue
    In that order.
     

  5. ninjafada

    ninjafada Master Guru

    Messages:
    308
    Likes Received:
    0
    GPU:
    pny 670
  6. Gramps

    Gramps Active Member

    Messages:
    84
    Likes Received:
    0
    GPU:
    PNY GTX 770 4GB OC
    Hows progress with your tool ninjafada? Such a life-saver !
     
  7. Siamak8286

    Siamak8286 New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    Asus GTX670 TOP
    Does anyone know how to install SweetFX on in StarCraft 2 and World Of Warcraft? I've searched everywhere and didn't find anything.
     
  8. LeonhartGR

    LeonhartGR Member

    Messages:
    14
    Likes Received:
    0
    GPU:
    EVGA GTX 550 Ti 1GB RAM
    Is the new version compatible with the configurator (since the config is 1.3.3 version)? If not, will there be a new release for the configurator that includes the new version of sweetfx? Thanks!
     
  9. TCPIP

    TCPIP Active Member

    Messages:
    67
    Likes Received:
    0
    GPU:
    AMD Radeon R9 290
    Strange, today it looks different, and way better, here are the screenshots:
    on
    [​IMG]
    off
    [​IMG]
     
  10. WhiteLightning

    WhiteLightning Don Illuminati Staff Member

    Messages:
    27,901
    Likes Received:
    870
    GPU:
    GTX1070 iChillx4
    @CeeJay.dk
    Will you make sweetfx 1.4 compatible with X64 ?
     

  11. LambertoKevlar

    LambertoKevlar Member Guru

    Messages:
    116
    Likes Received:
    0
    GPU:
    Asus Gtx Titan
    i tried it but it doesn't work for me...it's very strange
     
  12. nanogenesis

    nanogenesis Maha Guru

    Messages:
    1,287
    Likes Received:
    0
    GPU:
    MSI R9 390X 1178|6350
    So today I fired up RE5 and did this :

    [​IMG]
    [​IMG]

    Its just Lift Gamma Gain shaders with Luma Sharpen and lots of vibrance (I love whoring with vibrance to some extent in all games)

    Don't know how good everyone thinks this is.. but I was literally not able to give my exam properly, just thinking of how amazing it looks. The image was trapped behind my eyelids. This is probably the first time I've used LGG shaders properly lol
     
  13. kaicooper

    kaicooper Master Guru

    Messages:
    516
    Likes Received:
    39
    GPU:
    GTX 780 SC ACX
    Amazing..keep up the good work
     
  14. ninjafada

    ninjafada Master Guru

    Messages:
    308
    Likes Received:
    0
    GPU:
    pny 670
    i was able to open a file with a drag n drop
    but even using 32bits color i have a lost in quality when i render

    i googled but the only time someone ask and got an answer it was on a pay to be helped so i can see it ;;
    now i search if i can do this with shaders perhaps
     
  15. ACMPraetorian

    ACMPraetorian Member Guru

    Messages:
    101
    Likes Received:
    0
    GPU:
    Sapphire HD 7950 OC

  16. Marcel

    Marcel Maha Guru

    Messages:
    1,141
    Likes Received:
    0
    GPU:
    MSI GTX 1070 Gaming
    hm...

    SweetFX 1.4 do not work with PCSX2 emulator, but 1.3 work without problems...
     
  17. tony_almeida

    tony_almeida Active Member

    Messages:
    65
    Likes Received:
    0
    GPU:
    Videocard
    Holly sharpen :D

    Before
    http://postimg.org/image/w0yefjblp/full/
    After
    http://postimg.org/image/r3ktuf9ml/full/

    /*-----------------------------------------------------------.
    / Description /
    '------------------------------------------------------------/

    Game: Any
    SweetFX version: 1.4
    Author: CeeJay.dk
    Description:

    These are the default settings for SweetFX 1.4
    They smoothen jagged edges with SMAA anti-aliasing, sharpen the image with LumaSharpen and make the colors slightly more vibrant with Vibrance.

    Please note when tweaking settings that higher numbers does not always equal better (nor does lower).
    Finding the best settings for your game and your taste is about finding just the right amount to apply.

    If you made a good setttings preset please share it with your friends, on forums and websites,
    and/or submit it to the SweetFX Settings Database : http://sfx.thelazy.net/games/

    /*-----------------------------------------------------------.
    / Choose effects /
    '-----------------------------------------------------------*/

    // Set to 1 for ON or 0 for OFF
    #define USE_SMAA_ANTIALIASING 1 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
    #define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique. WIP - Currently only works in DX9 and you need to use the FXAA injector dlls.
    #define USE_CARTOON 1 //[0 or 1] Cartoon : "Toon"s the image. (Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen)
    #define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. (Interferes with SMAA, Cartoon, Bloom, HDR and Lumasharpen, and it has a very high performance cost)
    #define USE_BLOOM 0 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
    #define USE_HDR 0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
    #define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
    #define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
    #define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
    #define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
    #define USE_LIFTGAMMAGAIN 0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping)
    #define USE_TONEMAP 1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
    #define USE_VIBRANCE 0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
    #define USE_CURVES 1 //[0 or 1] Curves : Contrast adjustments using S-curves.
    #define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image.
    #define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
    #define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
    #define USE_BORDER 0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes.
    #define USE_SPLITSCREEN 0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode.


    /*-----------------------------------------------------------.
    / SMAA Anti-aliasing settings /
    '-----------------------------------------------------------*/

    #define SMAA_THRESHOLD 0.05 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
    #define SMAA_MAX_SEARCH_STEPS 98 //[0 to 98] Determines the radius SMAA will search for aliased edges
    #define SMAA_MAX_SEARCH_STEPS_DIAG 16 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges
    #define SMAA_CORNER_ROUNDING 100 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default.

    // -- Advanced SMAA settings --
    #define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster)
    #define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.
    //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card.

    /*-----------------------------------------------------------.
    / FXAA Anti-aliasing settings /
    '-----------------------------------------------------------*/
    #define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset. 9 is the highest quality.
    #define fxaa_Subpix 0.400 //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal.
    #define fxaa_EdgeThreshold 0.250 //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm.
    #define fxaa_EdgeThresholdMin 0.060 //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks.


    /*-----------------------------------------------------------.
    / Cartoon settings /
    '-----------------------------------------------------------*/
    #define CartoonPower 0.3 //[0.1 to 10.0] Amount of effect you want.


    /*-----------------------------------------------------------.
    / Advanced CRT settings /
    '----------------------------------------------------------*/
    #define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want

    #define CRTResolution 1.2 //[1.0 to 8.O] Input size coefficent (low values gives the "low-res retro look"). Default is 1.2
    #define CRTgamma 2.4 //[0.0 to 4.0] Gamma of simulated CRT (default 2.4)
    #define CRTmonitorgamma 2.2 //[0.0 to 4.0] Gamma of display monitor (typically 2.2 is correct)
    #define CRTBrightness 1.0 //[1.0 to 3.0] Used to boost brightness a little. Default is 1.0
    #define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer values preferably). Default is 2.0
    #define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines bloom effect". Default is on

    #define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off (0)
    #define CRTCurvatureRadius 1.5 //[0.0 to 2.0] Curvature Radius (only effective when Curvature is enabled). Default is 1.5
    #define CRTCornerSize 0.0010 //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001
    #define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to monitor. Default is 2.00
    #define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X coordinates)
    #define CRTAngleY -0.10 //[-0.20 to 0.20] Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look)
    #define CRTOverScan 1.01 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2% overscan). Default is 1.01
    #define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam profile (warning : performance hit)

    /*-----------------------------------------------------------.
    / Bloom settings /
    '-----------------------------------------------------------*/
    #define BloomThreshold 20.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
    #define BloomPower 1.446 //[0.000 to 8.000] Strength of the bloom
    #define BloomWidth 0.0142 //[0.0000 to 1.0000] Width of the bloom


    /*-----------------------------------------------------------.
    / HDR settings /
    '-----------------------------------------------------------*/
    #define HDRPower 1.30 //[0.00 to 8.00] Strangely lowering this makes the image brighter
    #define radius2 0.87 //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter

    /*-----------------------------------------------------------.
    / LumaSharpen settings /
    '-----------------------------------------------------------*/
    // -- Sharpening --
    #define sharp_strength 3.0 //[0.10 to 3.00] Strength of the sharpening
    #define sharp_clamp 0.035 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035

    // -- Advanced sharpening settings --
    #define pattern 1 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
    #define offset_bias 2.0 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern.
    //I designed the pattern for offset_bias 1.0, but feel free to experiment.

    // -- Debug sharpening settings --
    #define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better)


    /*-----------------------------------------------------------.
    / TECHNICOLOR settings /
    '-----------------------------------------------------------*/
    #define TechniAmount 0.4 //[0.00 to 1.00]
    #define TechniPower 4.0 //[0.00 to 8.00]
    #define redNegativeAmount 0.88 //[0.00 to 1.00]
    #define greenNegativeAmount 0.88 //[0.00 to 1.00]
    #define blueNegativeAmount 0.88 //[0.00 to 1.00]


    /*-----------------------------------------------------------.
    / Cineon DPX settings /
    '-----------------------------------------------------------*/
    #define Red 8.0 //[1.0 to 15.0]
    #define Green 8.0 //[1.0 to 15.0]
    #define Blue 8.0 //[1.0 to 15.0]

    #define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
    #define DPXSaturation 3.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.

    #define RedC 0.36 //[0.60 to 0.20]
    #define GreenC 0.36 //[0.60 to 0.20]
    #define BlueC 0.34 //[0.60 to 0.20]

    #define Blend 0.2 //[0.00 to 1.00] How strong the effect should be.


    /*-----------------------------------------------------------.
    / Monochrome settings /
    '-----------------------------------------------------------*/
    #define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00)


    /*-----------------------------------------------------------.
    / Lift Gamma Gain settings /
    '-----------------------------------------------------------*/
    #define RGB_Lift float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust shadows for Red, Green and Blue
    #define RGB_Gamma float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
    #define RGB_Gain float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust highlights for Red, Green and Blue


    /*-----------------------------------------------------------.
    / Tonemap settings /
    '-----------------------------------------------------------*/
    #define Gamma 0.9 //[0.000 to 2.000] Adjust midtones

    #define Exposure 0.0 //[-1.000 to 1.000] Adjust exposure

    #define Saturation -0.4 //[-1.000 to 1.000] Adjust saturation

    #define Bleach 0.0 //[0.000 to 1.000] Brightens the shadows and fades the colors

    #define Defog 0.0 //[0.000 to 1.000] How much of the color tint to remove
    #define FogColor float3(0.0, 0.0, 0.0) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue


    /*-----------------------------------------------------------.
    / Vibrance settings /
    '-----------------------------------------------------------*/
    #define Vibrance 0.15 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.


    /*-----------------------------------------------------------.
    / Curves settings /
    '-----------------------------------------------------------*/
    #define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
    #define Curves_contrast 0.8 //[-1.00 to 1.00] The amount of contrast you want

    // -- Advanced curve settings --
    #define Curves_formula 2 //[1|2|3|4|5|6|7|8|9] The contrast s-curve you want to use.
    //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
    //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola.
    //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
    //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.

    /*-----------------------------------------------------------.
    / Sepia settings /
    '-----------------------------------------------------------*/
    #define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image
    #define GreyPower 0.11 //[0.00 to 1.00] How much desaturate the image before tinting it
    #define SepiaPower 0.58 //[0.00 to 1.00] How much to tint the image


    /*-----------------------------------------------------------.
    / Vignette settings /
    '-----------------------------------------------------------*/
    #define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high.
    #define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from center
    #define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White.
    #define VignetteSlope 8 //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
    #define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of effect.


    /*-----------------------------------------------------------.
    / Dither settings /
    '-----------------------------------------------------------*/
    #define dither_method 2 //[1 or 2] 1 = Ordering dithering (good and very fast), 2 = Random dithering (even better dithering but not as fast)

    //Note that the patterns used by Dither, makes an image harder to compress.
    //This can make your screenshots and video recordings take up more space.


    /*-----------------------------------------------------------.
    / Border settings /
    '-----------------------------------------------------------*/
    //No settings yet, beyond switching it on or off in the top section.


    /*-----------------------------------------------------------.
    / Splitscreen settings /
    '-----------------------------------------------------------*/
    #define splitscreen_mode 1 //[1|2|3|4|5] 1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split
     
  18. 80T

    80T Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    nVidia GTS250 1GB
    Ninja, will your app support rendering at the resolution of the loaded image ?

    If I remember right, Enb Series has an option special for RE5 to remove the greenish tint shader from the game but it's also likely to produce some bugs along with the removal of that shader.
    I guess it will be helpful to have that shader removed previously to set up SweetFX... and also it will gain you a little performance boost.
     
    Last edited: Mar 24, 2013
  19. ninjafada

    ninjafada Master Guru

    Messages:
    308
    Likes Received:
    0
    GPU:
    pny 670
    yep i'm working on it now forcing the windows at the image size
    but still can't figure why every image i load as poor quality even bmp
     
  20. 80T

    80T Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    nVidia GTS250 1GB
    I see... Thx for looking into the resolution thing.
     
    Last edited: Mar 24, 2013
Thread Status:
Not open for further replies.

Share This Page