[SOLVED] RX 580 - Overheating after applying new termal paste :(

Discussion in 'Videocards - AMD Radeon Drivers Section' started by srdjan1995, Apr 5, 2020.

  1. Undying

    Undying Ancient Guru

    Messages:
    12,962
    Likes Received:
    2,249
    GPU:
    Aorus RX580 XTR 8GB
    Its not. This is the best 580 out there, better than 580 Nitro. Im amazed how good it is, huge and its tripple slot cooler is doing its job. Its not even laud at that rpm and running at 1450mhz (can push it even more but not needed)
    https://www.gigabyte.com/Graphics-Card/GV-RX580XTRAORUS-8G#kf

    Control 20min or so monitoring on second monitor :

    [​IMG]
     
    Last edited: Apr 6, 2020
    srdjan1995 likes this.
  2. srdjan1995

    srdjan1995 Member Guru

    Messages:
    148
    Likes Received:
    16
    GPU:
    Vapor-X R9 270X
    Juuu čoveče... Šteta što nisam našao nijednu asus kad sam uzimao, bili samo ovakvi nekakvi modeli.
     
    Undying likes this.
  3. Undying

    Undying Ancient Guru

    Messages:
    12,962
    Likes Received:
    2,249
    GPU:
    Aorus RX580 XTR 8GB
    Gigabyte* ;)

    Kazem ti ovo je bas brutalna kartica jedna od najboljih 580 tki. Stara 2 godine sad vec.
     
    srdjan1995 likes this.
  4. srdjan1995

    srdjan1995 Member Guru

    Messages:
    148
    Likes Received:
    16
    GPU:
    Vapor-X R9 270X
    Da, da, Gigabyte, moja greska. :D Dobra, dobra, nema sta. Inace, ja sam prvo uzeo XFX model, koji je imao problem, u igrama stalno restartovao komp, i posle 3-4 nosenja na reklamaciju, posalju mi ovu Sapphire Pulse. E sad, ko zna, mozda su mi poslali neki reparirani model, a ja sad zeznuo garanciju zbog otvaranja.
    Nisu mi poslali graficku u originalnom pakovanju, vec vratili u onom of XFX modela, i to samo onaj unutrasnju kutiju, bez one spoljasnje sa slikom, informacijama itd. Defektni WinWin.
     

  5. anticupidon

    anticupidon Ancient Guru

    Messages:
    4,973
    Likes Received:
    1,536
    GPU:
    Polaris/Vega/Navi
    Google translate just left the chat...:rolleyes:
     
    386SX, AsiJu and srdjan1995 like this.
  6. primetime^

    primetime^ Master Guru

    Messages:
    905
    Likes Received:
    15
    GPU:
    Sapphire RX Vega 64
  7. Benik3

    Benik3 Master Guru

    Messages:
    499
    Likes Received:
    15
    GPU:
    ASUS DUAL-RX580-O4G
    AS5 is probably capacitive but it's not conductive. I never had problem with it. Applied it many times on CPU and GPU (mobiles not desktop).
    Anyway Grizzly Kryonaut is probably the best what you can get now.
     
    Last edited: Apr 7, 2020
  8. srdjan1995

    srdjan1995 Member Guru

    Messages:
    148
    Likes Received:
    16
    GPU:
    Vapor-X R9 270X
    anticupidon likes this.
  9. Benik3

    Benik3 Master Guru

    Messages:
    499
    Likes Received:
    15
    GPU:
    ASUS DUAL-RX580-O4G
    The graphite is very interesting, but you must be sure, that the heatsink fit 100% on the chip evenly. If there will not be contact on some part of the chip, you will have problem...
     
    srdjan1995 likes this.
  10. primetime^

    primetime^ Master Guru

    Messages:
    905
    Likes Received:
    15
    GPU:
    Sapphire RX Vega 64
    take a measurement....the one i linked is 40mm and could be trimmed if needed
     
    srdjan1995 likes this.

  11. Benik3

    Benik3 Master Guru

    Messages:
    499
    Likes Received:
    15
    GPU:
    ASUS DUAL-RX580-O4G
    I'm talking about distance between chip and heatsink :)
    For imagination if you screw one side a lot and the second very lightly, the heat sink will not perfectly sit on the chip, it will be tilted...
    The paste is here only to solve these small gaps. If there will be perfectly flat and fitting heatsink + chip, we don't need any thermal paste :)
     
    AsiJu and srdjan1995 like this.
  12. tsunami231

    tsunami231 Ancient Guru

    Messages:
    10,416
    Likes Received:
    559
    GPU:
    EVGA 1070Ti Black
    is that bad for gpu/cpu something? i been using and MX5 years and never issue, I rare if ever repaste the gpu and only time I will redo paste on cpu is temputures out it normal range
     
  13. sykozis

    sykozis Ancient Guru

    Messages:
    21,624
    Likes Received:
    927
    GPU:
    MSI RX5700
    AS5 is fine as long as it stays on the GPU die or the heatspreader. It's when it connects pins/traces/leads that problems can occur......

    MX4, on the other hand, performs better and is neither conductive or capacitive.
     
    anticupidon likes this.
  14. tsunami231

    tsunami231 Ancient Guru

    Messages:
    10,416
    Likes Received:
    559
    GPU:
    EVGA 1070Ti Black
    I have both I use what ever I find at the time when I need it think I have Arctic Ceramique some place too, then again I dont get the stuff on anything other then where it belongs, I very ocd bout that stuff. but make perfect sense why that stuff getting on those pins traces etc would be bad, which why ocd about make sure it only where it belongs
     
  15. Chastity

    Chastity Ancient Guru

    Messages:
    2,371
    Likes Received:
    686
    GPU:
    Nitro 5700 XT
    Arctic Silver 5 is super runny, capacitive, and just an overall underperformer compared to other pastes. It's a paste of the past and should remain there.
     
    anticupidon likes this.

  16. Thadeus

    Thadeus Member

    Messages:
    12
    Likes Received:
    12
    GPU:
    Sapphire RX 580
    srdjan1995 likes this.
  17. Diakon8

    Diakon8 New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    290x, 1060
    I have xfx xxx model
    oc1407mhz
    Temp 75-82c (division2)
    Power 150-160w
    Rpm 1800-2200

    I would say better change fans for classics 12cm case fans than changing paste. Ph2.0 adapter you will need for fan mood.
     
  18. infinityWrx

    infinityWrx New Member

    Messages:
    2
    Likes Received:
    1
    GPU:
    Rx 580 / 8gb
    What about gpu thermal pad, did you change it or did thermal pad still in good shape after your remove heatsink?
     
  19. infinityWrx

    infinityWrx New Member

    Messages:
    2
    Likes Received:
    1
    GPU:
    Rx 580 / 8gb
    Yeah, same problem with my rx 580 pulse, after reapply gpu thermal pad 1mm, the heatsink not contact the gpu die properly, then i change to 0.5mm thermal pad, problem sloved. You also can try laird thermal pad 1mm, it can deflect to 50% from original thickness. Factory thermal pad that sapphire use for gpu is 0.75mm, but i cant find it anywhere.
     

    Attached Files:

    Last edited: Apr 7, 2020
    srdjan1995 likes this.
  20. srdjan1995

    srdjan1995 Member Guru

    Messages:
    148
    Likes Received:
    16
    GPU:
    Vapor-X R9 270X
    I've ordered 1mm pads, but will order 0.5 it those don't work. Also, I've ordered noctua nt-h2 paste. Hope that one will do good. Changed paste on many GPU's, but never had a problem like this.
     

Share This Page