Discussion in 'RivaTuner Advanced Discussion forum' started by IceMole, Nov 2, 2004.
Have you tried 3d marks? what kind of forceware drivers do you use?
Ladies and Gentlemen!
My congratulations, pipeline lock of new 6800NU/6800LE have been finally breached with your help. Thanks to everybody who posted required diagnostic info in this thread / contacted me via ICQ / email and even offered unmoddable 6800 samples for testing. Personal thanks to FleXx.
Wait for 15.3, also drop your email here if you wish to assist with testing of new version and have such ‘unmoddable’ (moddable now) 6800. I’ll choose about 10 of the most trustworthy users and send new beta tomorrow in the morning.
Thank you again for your collaboration.
Whoa I just ran the same command and it worked for me as well. Before rivatuner would NOT unlock the pipes and after running this:
RivaTuner.exe /wrc020,0 /wrc024,0 /wrc028,0 /wrc02c,0 /wr1540,13f0f /rr1540
It now shows 256bit NV40 (A1,16x1,6vp) with 128MB DDR
Nvstrap driver is not even installed ... but my card is currently flashed with a 6800GT bios
Running 3dmark03 now....previous score was 9700
barton @ 2.3ghz
moving red pixels....as i said, some kind of snowing. But i have problems also in 2d...when I´m browsing...but not everywhere.
Unwinder I love you !!!!
Just scored 10,799 in 3dmark03 ...
You da man, alright time to go study for my finals
try 3d mark 2005....mostly there are artefacts shown.
Guys, I understand your euphoria, but I don't recommend you to switch systems to 16 pipe mode with “RivaTuner.exe /wrc020,0 /wrc024,0 /wrc028,0 /wrc02c,0 /wr1540,13f0f /rr1540” right now and play with the system which is unlocked this way. Just have a bit of patience and wait for RC15.3 to do it correctly.
That command line is for testing and pipeline programmability testing, not for switching your system to normal 16-pipe mode. In reality 16-pipe mode must be set up _before_ the ForceWare starts / configures itself using pipeline mode programmed by BIOS. That condition is TRUE in case of using NVStrap, as it is boot bus extender driver and it programs hardware before the driver latches pipeline configuration. In case of reprogramming pipeline mode on the fly with this command line sequence, the driver may work improperly as it remembers its’ bootup pipeline configuration internally and GPU may simply hang (happily we have RobustChannels technology (equal ATI VPU Recover), which will simply reset your chip after few seconds of freezing).
So once again, please have a patience, and don’t play with this command line sequence now.
I will be eagerly awaiting 15.3.
And the power of the 'net does it again - collaboration leading to improvements.
Great programming and great detective work!
You are the man! Is there a donation box anywhere?!
I'm interested to test the beta. firstname.lastname@example.org
Im interested in testing the beta. email@example.com
6800LE -> 16v6 using your command line worked.
So i should revert to 8x4 for the time being?
Meridius: A change from 2810 in 3dmark05 to 3340 with 16v6 enabled.
A change from 7500 to 9030 in 3dmark 03.
No artifacts noticed, eagerly awaiting the new version now
Keep up the good work Undwinder.
so: firstname.lastname@example.org it would be pleasure test the god work.
I get the following with this command : /wr1540,13f0f /rr1540 /wrc020,1 /wr1540,13f0f /rr1540
256-bit NV40 (A1,8x1,4vp) with 128MB DDR
Reg 00001540 0001170c
2x the same.
I have an Aopen 6800 LE
I want to test the beta for Aopen email@example.com
My email address is firstname.lastname@example.org, (MSN/e-mail) and I would definetly like to test the new RT 15.3 with my locked Aopen 6800LE Unwinder, you're tha man, I mean it. Would you like to marry my sister? She's hot ^^
Hey greetz from Germ.
Want to test the RT 15.3,too.
Thanks,for your great work,Unwinder!
it would be great if there is an option in the next rivatuner to switch manually in 2d/3d mode, because i have a gainward 6800 256mo ddr and sometime idling i'm in 3d mode with 1.4v and the fan blowing like hell
so if there's a way to do it look for it please uwinder!!
you are doing one of the greatest job i'v ever seen in computer!!!!
great job unwinder!
I would like to try RT 15.3 too....
Thnx alot man... You're the best! Ever! :e
So i want to test the beta of 15.3, too. Here my e-mail: Lunatix@pc-tuningworld.de thx a lot, if you choose me
FINALY a reason for my problems
The reason why I payed a 100 $ more for a 6800 Nu instead of buing a 6800 LE
Darn im jumping up and down. Hope to take a top 5 placement on the ORB if it Works
OMFG!!! Thank you so much Unwinder!!! Argh! I still can't figure out how to run the program with the extra "/wrc020,0 /wrc024,0 /wrc028,0 /wrc02c,0 /wr1540,13f0f /rr1540 "
Someone please tell me!!!
Also, I would love to test out 15.3