PROJECT V-3 So, I'm back again and again with a new project. And again it will be a custom build the entire time I invented and I've never seen so originality is garanted from me 100% you know what I mean .. This project is also apologise from me and I want to prove I'm not a copier. Unusual water cooling component layout and graphics will not be planted directly into the board, but will be used PCI-E card extension cord and positioned so that the entire visible and it obviously transparent water block. The whole computer will again be water-cooled using TOP products from the best companies, except for the reservoir - will be custom CNC drilled. This will be something quite a bit smaller for mATX board, width 300 , length 336 and height 378 . Again, I wanted to see inside because inside will be good components and it will all be color coordinated, so the choice fell on the side of a piece of clear acrylic. The main points of the project: Case built from scratch with an unusual design and layout of components Custom reservoir in front of the PC, CNC machined from a piece of acrylic. The rear radiator grill with unconventional due Completion of the project would see the second half of January, it depends a lot on how much time I have to spend studying and other things. : D I'm not much for writing, so now the facts about the case and some dimensions of course renders and sponsors. Material: Sheet steel Acrylic Capacity: Position 240 for two radiators, bottom max. 45 mm thick mATX motherboard Position for one graphics card Position ATX power supply, D5 pump and reservoir Components: Intel i7 4790K ASUS GENE VII ASUS GTX780Ti DCII Be Quiet! Straight Power 10 CM 800 Be Quiet! Silent Wings 2 120 mm Kingston 3K 240 GB Kingston HyperX Black Fury 16 GB And, of course, water cooling components, but about those another day: D RENDERS I have long hesitated about color matching of the entire PC, came to me two suggestions: 1.) Green - probably UV water and UV acrylic elements 2.) Red and wide to align with ROG motherboard So far, I have decided for the red, but I'll see throughout the building, if it still will not change. : D SPONSORS Again I must mention great companies which supports me and believe in me. Thanks! http://www.asus.cz ASUS Maximus VII GENE ASUS GTX780Ti DCII http://www.aquatuning.cz ALPHACOOL NexXxoS XT45 Full Copper 240 mm ALPHACOOL NexXxoS UT60 Full Copper 240 mm ALPHACOOL VPP655 - single edition http://www.bitspower.com The complete water cooling - blocks, fittings TOP for the pump Mod Kit for D5 pump http://www.kingston.com HyperX SSD 3k 240 GB HyperX RAM 16GB Black Fury http://www.bequiet.com 6x Silent Wings 2 120 mm Power 850W Zone http://www.icemodz.com Sleeving, cabling http://www.plexi.cz Czech company MK Plexi They will support acrylic for reservoir Well, it would probably suffice for today Even here last picture, the current Progress. More to come very soon.