Sandy and Ivy bridge owners 24/7 clocks?

Discussion in 'Processors and motherboards Intel' started by kens30, Apr 5, 2013.

  1. kens30

    kens30 Maha Guru

    Messages:
    1,082
    Likes Received:
    1
    GPU:
    STRIX GTX 1070 @ 2038mhz
    Hi to all i was just curious as to what clocks and volts you have for 24/7 use.
    My 24/7 clocks are 4.6ghz with HT on at 1.25v with room temp of 21c i never exceed 57c. I can go as high as 5ghz 1.37v but only for benchmarking as my pc is mainly for gaming.
     
  2. The_Fool

    The_Fool Maha Guru

    Messages:
    1,015
    Likes Received:
    0
    GPU:
    2xGIGABYTE Windforce 7950
    You can do that with the 2700k? I need 1.4V for 4.6GHz on my 2600k, which is my 24/7 overclock. For 4.7GHz I need a ton more, so I see no reason to put far more voltage on my CPU for 100MHz more.

    Under Prime95 or IntelBurnTest my maximum temperature gets up to 77°C.
     
  3. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    9,833
    Likes Received:
    72
    GPU:
    1080Ti H20
    5ghz ht 24/7 low 50s max temp. ivys are going to be mucher lower

    looks like you got a dud. My old 2600k needed 1.4250 for 4.8
     
    Last edited: Apr 5, 2013
  4. kens30

    kens30 Maha Guru

    Messages:
    1,082
    Likes Received:
    1
    GPU:
    STRIX GTX 1070 @ 2038mhz
    1.4V for 4.6ghz? Well i know every chip is different but that is a lot of vcore for 4.6ghz.
    I haven't even tried putting that much volts on my cpu.I guess i got lucky with my cpu but Agent-A01 seems he got even more lucky i need 1.37 for 5ghz without HT and by the way i use for cooling a H100.
     

  5. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    9,833
    Likes Received:
    72
    GPU:
    1080Ti H20
    well thats not real water lol , i have 720rad space
     
  6. kens30

    kens30 Maha Guru

    Messages:
    1,082
    Likes Received:
    1
    GPU:
    STRIX GTX 1070 @ 2038mhz
    Yeh i know is should update my specs from h2o to H100.
     
  7. The_Fool

    The_Fool Maha Guru

    Messages:
    1,015
    Likes Received:
    0
    GPU:
    2xGIGABYTE Windforce 7950
    I couldn't find any way around it. At 1.39V under load it blue-screens with 0x...101. It's stable at 1.40V under load, though. It still performs great, just isn't as good as an overclocker as most.
     
  8. killer_939

    killer_939 Ancient Guru

    Messages:
    2,598
    Likes Received:
    0
    GPU:
    Radeon 7950 @ 1100/1500
    I run at 1.352-1.360v in CPU-Z at 4.6GHz 24/7.
    Load temps on my cores in p95 small fft max at 63 64 67 60 and 69 package. CPUTIN reads 45c max.
    Core temps drop to >30 in less than 15 seconds after prime 95 was running for over 45 min. :\
     
  9. hallryu

    hallryu Don Altobello

    Messages:
    11,378
    Likes Received:
    0
    GPU:
    2x HD7970 - QNIX/U2711
    4.7GHz 1.29v

    Delid idle high 20's to low 30's. In game high 40's to mid 50's depending on the title.
     
    Last edited: Apr 6, 2013
  10. sykozis

    sykozis Ancient Guru

    Messages:
    20,010
    Likes Received:
    29
    GPU:
    XFX RX 470
    I run at 4.5ghz@1.28V w/ HT on
     

  11. Pill Monster

    Pill Monster Banned

    Messages:
    25,234
    Likes Received:
    0
    GPU:
    7950 Vapor-X 1100/1500
    ^Jeez 1.28v that's great!
    I need 1.39v @4.5, 1.42v@ 4.8 and 1.50v for 5.0. 200mhz is hardly worth all that extra volts.
     
  12. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,135
    Likes Received:
    0
    GPU:
    2x 980Ti Gaming 1430/7296
    1.45v for 4.6ht and 4.7 no ht. Lame chip
     
  13. IcE

    IcE Don Snow Staff Member

    Messages:
    10,654
    Likes Received:
    11
    GPU:
    Gigabyte 970 G1
    I'm at 4.0 24/7 at 1.05V. I could actually go lower, but I didn't feel like doing a bunch of prime95, lol.

    Low, I know, but I like that my max temp is 58C. Not to mention nothing I do would benefit from any more speed.
     
  14. sykozis

    sykozis Ancient Guru

    Messages:
    20,010
    Likes Received:
    29
    GPU:
    XFX RX 470
    Problem is, I use a Kuhler 620 and it just barely keeps temps acceptable under full load.....otherwise I'd push for 4.8ghz
     
  15. Loophole35

    Loophole35 Ancient Guru

    Messages:
    8,563
    Likes Received:
    91
    GPU:
    EVGA 1080ti SC
    My 2600k is 4.6 @ 1.345-1.350V HT on
    My 2500k is 4.5 @ 1.357-1.367V this is set offset over clock i need to spend some time with the 2600k and see if i can get it lower and setup the offset.

    BTW the 2700k are binned CPU and tend to clock amazing
     

  16. The Phoenix

    The Phoenix Maha Guru

    Messages:
    1,113
    Likes Received:
    0
    GPU:
    gigabyte 970 g1
    4.6g, 1.22v,ht on
     
  17. Xtreme1979

    Xtreme1979 Maha Guru

    Messages:
    1,265
    Likes Received:
    0
    GPU:
    EVGA GTX 680 2GB O/C
    4.4gHz 1.352 volts full load running LinX. UEFI voltage 1.30.
     
  18. beta-sama

    beta-sama Member Guru

    Messages:
    101
    Likes Received:
    0
    GPU:
    AORUS GTX1080Ti WF
    4.8Ghz, 1.35v, HT On, No delid.

    Max temp under P95 79°C.
     
  19. 3dPlayer

    3dPlayer Banned

    Messages:
    1,820
    Likes Received:
    0
    GPU:
    Have
    I5 2400 3.2 + h61 :)
     
    Last edited: Apr 6, 2013
  20. macdaddy

    macdaddy Ancient Guru

    Messages:
    2,388
    Likes Received:
    0
    GPU:
    2 X GTX780 SLI
    4.5GHZ @ 1.18v summer
    4.8GHZ @ 1.34v cooler weather.
    24/7 HT enabled with all powersaving disabled.
     

Share This Page