Samsung CHG70 27" Firmware 1020.0, 32" Firmware 1019.2

Discussion in 'Frontpage news' started by NvidiaFreak650, Aug 30, 2018.

  1. NvidiaFreak650

    NvidiaFreak650 Master Guru

    Messages:
    524
    Likes Received:
    320
    GPU:
    AMD Radeon 6900 XT
    Thanks to userybqfO3oBst at Samsung Community for the links.
    Note: Factory Reset the monitor first before installing the new firmware.

    Firmware 1020.0 for 27" Model
    Download Link:http://org.downloadcenter.samsung.c...0618105734633/C27HG70_Firmware.exe&OriginYN=N
    Source: https://www.samsung.com/sec/support/model/LC27HG70QQKXKR/

    Firmware 1019.2 for 32" Model
    Download Link: http://org.downloadcenter.samsung.c...0618110405039/C32HG70_Firmware.exe&OriginYN=N
    Source: https://www.samsung.com/sec/support/model/LC32HG70QQKXKR/

    Here Proof showing I flash my US monitor after Factory Reset then upgrade the Firmware.
    also it fix my flicker issue in Window 10. try opening a App like Xbox, you going to see a lot of flickering with the old Firmware with Freesync enable, now I see none with 1020.0 with Freesync enable.
    [​IMG]
     
    Last edited: Aug 30, 2018
    Maddness likes this.
  2. OnnA

    OnnA Ancient Guru

    Messages:
    13,941
    Likes Received:
    3,668
    GPU:
    3080Ti VISION OC
    Is this monitor Good? I mean 9/10 at last GOOD :p
    1. Build Quality
    2. Fastness
    3. Image Quality
    4. 10/12Bit ready (OC by CRU)
    5. Real FS range can i have 29-150FPS ?

    Maby i will go for this one in near future, If MicroLED or OLED don't hit us by next Summer :D
    Yes i know the specs (from Sammie site)
    Just tell me you're experience as an User/Gamer.

    Something like my Editorials about HW im using.
     
  3. KillmyFlow

    KillmyFlow New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    Nvidia GTX 1080 8GB
    I have the C32HG70 monitor all launched in the CRU at 150Hz frequency, but how else can you raise to 12Bit? Didn't find where to disperse, firmware ver. 1021.4
     
  4. alanm

    alanm Ancient Guru

    Messages:
    10,680
    Likes Received:
    2,775
    GPU:
    Asus 2080 Dual OC
    Its curved. A strong 1800r curve on a 27" monitor doesnt work well. Curved works best on 34" ultra-wides or larger imo. Under that, its a gimmick.
     

  5. OnnA

    OnnA Ancient Guru

    Messages:
    13,941
    Likes Received:
    3,668
    GPU:
    3080Ti VISION OC
    Maby it can't.
    In CRU there is option: in HDMI & Colorimetry
     
  6. KillmyFlow

    KillmyFlow New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    Nvidia GTX 1080 8GB
    Is it only on HDMI? Will you raise 12Bit on DisplayPort? (I didn't understand what the parameter was inside)

    And what you wrote about FS Range 29-150, I changed the V-Rate to 29-150 and the FS Range unit to 29-150 (there was 48-144) and on the LCD Native option put 150Hz - and everything works perfectly I can attach the result, but no further than these figures did not try to test q)

    C32HG70 and GTX 1080 graphics card, on the monitor is firmware 1021.4 (Downloaded from the Korean official site Samsung)

    But on the account of the overall quality of the image on the OSD menu and can not find normal settings and icc profiles x (
    And pixels cut my eyes - I can't get used to it.
     
  7. KillmyFlow

    KillmyFlow New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    Nvidia GTX 1080 8GB
  8. wingback18

    wingback18 New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    asrock killer sli/ac
  9. miragui

    miragui New Member

    Messages:
    1
    Likes Received:
    1
    GPU:
    Zotac GTX 480 1536MB
    Last edited: Jan 5, 2021
    Undying likes this.

Share This Page