RX Vega Owners Thread, Tests, Mods, BIOS & Tweaks !

Discussion in 'Videocards - AMD Radeon' started by OnnA, Aug 15, 2017.

Thread Status:
Not open for further replies.
  1. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
  2. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    FFXV PC Demo | Vega64 LC undervolted, HBCC@12GB, Computerbase benchmark 1440p

     
  3. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    Some 18.7.1 Driver runs with 3Dmark :D

    First with my New UV Default, second is with my Gaming UV clocks (using for Prey)

    Default = Tess On
    [​IMG]

    Default = Tess On
    [​IMG]
     
    Last edited: Jul 18, 2018
  4. mtrai

    mtrai Maha Guru

    Messages:
    1,175
    Likes Received:
    369
    GPU:
    PowerColor RD Vega
    New Graphics Firestirke high of 28791 with my Powercolor Red Devil Vega 64 flashed with a Liquid bios on the stock cooler, with tess off on the driver level per HWBot submission rules.

    [​IMG]
     

  5. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    Hmm, i will test with Tess OFF someday ;)
    I bet i will have 30k then :D

    PS.
    Where i need to turn Off tess? (in Adrenalin?)
     
  6. mtrai

    mtrai Maha Guru

    Messages:
    1,175
    Likes Received:
    369
    GPU:
    PowerColor RD Vega
    Yeah in Adrenalin.under gaming tab...global...just remember I was only testing this since it is allowed for valid HWBot submissions. I am not really sure how this being off would affect how games look. So I am not trying to cheese the results.
     
  7. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
  8. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    New UV values (so far is good & stable)
    Stability tested in TimeSpy.

    Some AC:O test (Quest & meeting Cleopatra 18/19Lev)

    P5 down to 0.975mV from 1.081mV :p
    Note:
    TimeSpy needs only 0.975v for 1500-1552MHz 7.5k GPU score @ 122tW !
    TimeSpy needs 1.056v for 1684MHz with 8083GPU score @ 162tW

    [​IMG]
     
    Last edited: Jul 19, 2018
  9. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    New Great Tweak for Better Gaming Experience in WinX

    UPD. 1 [Disabled Full Screen Optimization in *.exe]
    The Witcher 3 -> microstutter/tearing solved (Not observed on my Rig)

    =====================================================

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\System\GameConfigStore]
    "GameDVR_Enabled"=dword:00000000
    "GameDVR_FSEBehaviorMode"=dword:00000002
    "GameDVR_FSEBehavior"=dword:00000002
    "GameDVR_HonorUserFSEBehaviorMode"=dword:00000001
    "GameDVR_DXGIHonorFSEWindowsCompatible"=dword:00000001
    "GameDVR_EFSEFeatureFlags"=dword:00000000

    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\GameDVR]
    "AllowGameDVR"=dword:00000000
     
  10. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC

  11. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    GER (but Benchmarks you can clearly see)

     
  12. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    by Kasaris the Grumpy Old Man ;)

    http://www.overclock.net/forum/67-a...r-rx-vega-owners-thread-157.html#post27543642

    Quote: Originally Posted by OsmiumOC [​IMG]
    Woohoo finally I did the right thing and got an RX Vega card!

    I actually sold my 1080ti to switch to Vega 64 (I don´t play in 4k, so the 1080ti was overkill), and with the overhead I stepped up to Threadripper [​IMG] Thanks to the miners I sold that 1080ti for more money then I paid new back in april 2017.

    I bought a reference pcb with free crappy aircooler on top and replaced that with a waterblock. Then flashed LE-bios on it and dear god what have I unleashed. For baseline I left voltage on stock 1.25 and just raised PL a modest +25%. Result was a cool and bored Vega 64 in firestrike and heaven benchmarks. Sipping 300W the Core (~1720MHz no OC yet) was capping out at 47°C, Hotspot temp peaked at 65°C. HBM (1015MHz) at 48°C. Ambient temp was 24°C.
    I tried undervolting, but my card does not like that at all. Tried it with 1.2 instead of 1.25, since even with 300W PL it rarely went up to 1.2V, but that is an instant crash.

    Any experience on how safe the stock voltage is with full +50% powerlimit? Temps seem fine to me, I think I can give it that extra power, but what is the Vega electron immigration policy on crowded borders? I come from the dark green side, where they already freak out if you want to try and overvolt to 1.2V...

    Quote: Originally Posted by AngryLobster [​IMG]
    I did the same thing (1080 Ti to Vega) since Freesync/Gsync makes them basically indistinguishable in most titles. There are still some games where Vega just performs like ass in comparison like AC: Origins and Rise of the Tomb Raider.
    ------------------------------
    I did the same thing and ended up going from a 1080Ti to an RX Vega 64 as well when I built my Ryzen system. Like you said when using FreeSync / GSync they are pretty indistinguishable since you are locked to the max refresh rate of the monitor, which in the 1080ti's case was 100hz since it is being utilized on an Acer Predator x34. My Vega on the other hand is on an Acer XZ321QU 32" 144hz 1440p FreeSync monitor so I see higher peak frame rates anyway and the Avg and Min frame rates are still over 60FPS in any of the titles I play at 1440p.

    -----
    :eek: What? -> Yup :p:D
    -> https://www.hardocp.com/article/2017/07/26/blind_test_rx_vega_freesync_vs_gtx_1080_ti_gsync
     
  13. Slinkyminx

    Slinkyminx Master Guru

    Messages:
    209
    Likes Received:
    75
    GPU:
    GTX 1060
    Do I need to disable wattman before monitoring voltage ? Afterburner says it's dangerous to have more than one thing monitoring voltage.

    I was going to use Afterburner to check my voltage, using the unlock voltage monitoring

    Honestly I can't even find how to monitor voltage in wattman anyway, it's really annoying

    Cheers

    EDIT; It's alright, being one for a gamble I just went for it, unlocked voltage monitering in Afterburner, set it up as a graph, seems ot peak around 1.068, which isn't far off as I have it set in overdriventool for 1599Mhz @ 1.064
     
    Last edited: Jul 21, 2018
  14. Slinkyminx

    Slinkyminx Master Guru

    Messages:
    209
    Likes Received:
    75
    GPU:
    GTX 1060
    Well, it did just hit 1.075 during some BF1, although I can't find it in the graph history, it just says that was MAX. So must assume it was very brief.

    Either way, this all seems to be working much more as expected, than my previous attempt with my other card. (I have the Strix Vega 64 now)

    This is where I am currently at anyway
    [​IMG]

    I mean, seems to be all good so far !
     
    OnnA likes this.
  15. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    Great, Tweak Moar :rolleyes: (when you find sweet spot, give a notch higher for Stability reasons)
    1050v -> 1062v
     
    Slinkyminx likes this.

  16. Slinkyminx

    Slinkyminx Master Guru

    Messages:
    209
    Likes Received:
    75
    GPU:
    GTX 1060
    Before something obvious escapes me..... is that increment of 12 relevant ?

    I've just been tapping in random numbers :/
     
  17. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    Here:
    PS. Also check in WattMann if clocks are correct ;)
    So, Click-Apply and see if correct then same with OverdriveN Tool :D


    [​IMG]
     
    Last edited: Jul 21, 2018
  18. Slinkyminx

    Slinkyminx Master Guru

    Messages:
    209
    Likes Received:
    75
    GPU:
    GTX 1060
    What's powerplay ;o;

    *hand holding required*

    I understand the voltages above, just double checking because you said ALWAYS use overdriventool
     
  19. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    Vega uArch in the Pill :D

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  20. OnnA

    OnnA Ancient Guru

    Messages:
    13,901
    Likes Received:
    3,651
    GPU:
    3080Ti VISION OC
    New DX12 Games:

    Elder Scrolls Online
    TC The Division 2
    Forza Horizon 4
    New Gears of War
    WoW 2018
    ... World War 3
     
    Last edited: Jul 22, 2018
    Goiur likes this.
Thread Status:
Not open for further replies.

Share This Page