RTSS 6.7.0 beta 1

Discussion in 'MSI AfterBurner Application Development Forum' started by Unwinder, Feb 20, 2017.

Page 134 of 143
  1. dr_rus

    dr_rus Ancient Guru

    Messages:
    2,989
    Likes Received:
    337
    GPU:
    RTX 2080 OC
    Works fine.
     
    dr_rus, Oct 30, 2020
    #2661
    Astyanax likes this.
  2. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    Ah, so "i'm afraid the RTSS beta won't work with WD legion" was just an assumption. Thanks for confirmation.
     
    Unwinder, Oct 30, 2020
    #2662
  3. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    New RTSS 7.3.0 beta 8 build 23844 is available. Changes list includes:

    · Added 3 more decimal digits to fractional framerate limit adjustment control. Extended framerate limit adjustment precision can be necessary for new hybrid scanline sync mode, where the previous 0.001 FPS adjustment precision can be insufficient
    · Added fractional frametime limit adjustment support. Extended frametime limit adjustment precision can be necessary for new hybrid scanline sync mode, where the previous 1 microsecond adjustment precision can be insufficient
    · Now you may hold <Alt> and click framerate limit adjustment control to set framerate limit to your refresh rate
    · Now up/down spin buttons associated with framerate limit adjustment control tune the limit in minimum adjustment step instead of fixed 1 FPS step (e.g. in 0.1 FPS step if single decimal digit after comma is specified)
    · Added user adjustable resynchronization period for hybrid scanline sync mode. New HybridSyncPeriod profile entry is set to 60 seconds by default, which means that hybrid scanline sync will forcibly resynchronize tearline position with explicit scanline synchronization event once per minute. This feature can be helpful when tearline position is slowly drifting due to inability to specify the framerate limit, exactly matching with the refresh rate
    · All timing calculations for synchronous framerate limiting modes have been ported from floating point to integer format. It is aimed to improve timing precision for some old Direct3D9 applications, where Direct3D runtimes may reduce floating point co-processor precision causing less accurate timings calculation
    · Maximum GUI framerate limit increased to 480 FPS

    https://download-eu2.guru3d.com/rtss/RTSSSetup730Beta8Build23844.rar
     
    Last edited: Oct 30, 2020
    Unwinder, Oct 30, 2020
    #2663
    Kaminari, mdrejhon, bigcid1 and 5 others like this.
  4. terry_bogard_sv

    terry_bogard_sv Member

    Messages:
    48
    Likes Received:
    6
    GPU:
    AMD RX 5700
    Just perfect... I see the new release just arriving work... now I wanna go home to test it xD
     
    terry_bogard_sv, Oct 30, 2020
    #2664
    Unwinder likes this.

  5. Digika

    Digika Member Guru

    Messages:
    124
    Likes Received:
    1
    GPU:
    GTX 670
    If I start game with Scanlinesync0=1 and then use hotkey to steer it offscreen and leave that way - what would it be resynchronzed to next 60 seconds? To the starting value 1 or the one I adjusted via hotkeys?
     
    Digika, Oct 30, 2020
    #2665
  6. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    Answer is quite logical and you can answer it yourself.
     
    Unwinder, Oct 30, 2020
    #2666
  7. Digika

    Digika Member Guru

    Messages:
    124
    Likes Received:
    1
    GPU:
    GTX 670
    No I cant, that why I ask? If RTSS does not save the value I've adjusted via hotkeys then I have absolutely no way knowing what it will re-synchronize to and which value it will use - runtime or serialized.
     
    Digika, Oct 30, 2020
    #2667
  8. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    You can, if you think about it a bit. First, RTSS does save the value of scanline sync index adjusted via profile modifier hotkeys if you use HotkeyHandler plugin functionality for that. And even for old and obsolette hardcoded debug hotkeys enabled via SynchHotkeys switch, it makes absolutely zero sense to save "old" scanline position somewhere then sync to it instead of adjusted one. So in both cases it syncs to adjusted position.
     
    Unwinder, Oct 30, 2020
    #2668
  9. terry_bogard_sv

    terry_bogard_sv Member

    Messages:
    48
    Likes Received:
    6
    GPU:
    AMD RX 5700
    I started making new tests and noticed that the present value gets very stable at -0.00071 than my driver refresh rate, if I go to the AMD settings, in the display specs under Display, it says "G.Refresh Rate (Hz) - 60.0003". I then started substracting until I got a very stable value that goes downwards (Limit=5999959). At 1440p in MHW it stays the same for more than 20 seconds! counted, but I guess that it may get unstable depending on the card load and who knows what else. So far this version is the best for hybrid sync.

    Edit:

    Well at 1080p now I have flawless playing thanks to RTSS and Unwinder, at TV's stock 1440p (just a couple of free lines VBI) I found something nice too, at least in MHW (DX12) even if the "present" value is stable, due to the card utilization (78%+) you can start to see the tearline on screen, for my case the tearline started at the bottom of the screen ( I have set -20 for ssync0) and ended like at 35% of the screen, but its not many unstable lines like normal ssync, in hybrid sync is just 1 tearline that moves up or down or dissapears depending on card load, then I enabled Enhanced Sync and to my surprise the tearline was gone and the game did not stutter once even at 90%+ utilization, I was amazed. My card did not get to 99% though.
     
    Last edited: Oct 31, 2020
    terry_bogard_sv, Oct 30, 2020
    #2669
    Unwinder likes this.
  10. Astyanax

    Astyanax Ancient Guru

    Messages:
    9,082
    Likes Received:
    3,114
    GPU:
    GTX 1080ti
    This is a weird one, but unlike the majority of other apps where "dedicated memory usage \ process" and "shared memory usage \ process" appear on the active game window and disappear when inactive, Forza Horizon 4 does it backwards, visible when inactive, and not visible when active.


    [​IMG]

    [​IMG]

    I do remember this engine being whacky though.
     
    Astyanax, Oct 31, 2020
    #2670

  11. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    That's not a question of this engine. When introducing updated GPU.dll plugin with process specific dedicated/shared memory usage counters I mentioned that it won't work in EAC/BattleEye protected processes due to external access to game process used in implementation. The same applies to UWP apps in general. It is not a question of Forza doing it backwards either, the plugin is tracking process specific VRAM usage for a foreground process, so it simply starts displaying VRAM usage of different process (browser?) when you switch to it from the game.
     
    Unwinder, Oct 31, 2020
    #2671
  12. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    Excellent. Traditionally we launched the beta with this new functionality locally and in this thread only to test it on relatively small group of users who visit this thread. I guess hybrid mode is rather mature now so probably we'll launch new beta 8 in news on main page to let more people know about it.
     
    Unwinder, Oct 31, 2020
    #2672
    terry_bogard_sv likes this.
  13. terry_bogard_sv

    terry_bogard_sv Member

    Messages:
    48
    Likes Received:
    6
    GPU:
    AMD RX 5700
    So, for the people that can't adjust its VBI and play at 1080p I think I got the best settings so far, assuming the resolution is like mine (1125 vertical total) I'm using 59.999467 as framelimit and -560 for ssync, this will leave the tearline a bit below half screen going downwards but reaaalllly slow and activate Enhanced Sync, this have given the best results. The games I've tested have stuttered a couple of times but that's because of very high card utilization, frame dips, disk access or just bad games (like jedi fallen order xD)
     
    terry_bogard_sv, Oct 31, 2020
    #2673
  14. Digika

    Digika Member Guru

    Messages:
    124
    Likes Received:
    1
    GPU:
    GTX 670
    How does that work even? ESync just like FastSynbc requires you to have stable (99% window) 2x FPS of refresh rate or you get consistent stuttering, and since you lock/limit your FPS to your RR for hybrid sync - how would that even work?
     
    Digika, Oct 31, 2020
    #2674
  15. terry_bogard_sv

    terry_bogard_sv Member

    Messages:
    48
    Likes Received:
    6
    GPU:
    AMD RX 5700
    Enhanced sync only requires fps to match your screen refresh without maxing your card utilization. That and maintaining your tearline somewhere between halfscreen and bottom of the screen, if these conditions are met you can have a smooth gameplay experience, it is better explained in the scanline sync HOW TO of the blur busters forums.
     
    terry_bogard_sv, Nov 1, 2020
    #2675

  16. Astyanax

    Astyanax Ancient Guru

    Messages:
    9,082
    Likes Received:
    3,114
    GPU:
    GTX 1080ti
    Ah, right, thanks for clearing that up.
     
    Astyanax, Nov 1, 2020
    #2676
  17. sertopico

    sertopico Maha Guru

    Messages:
    1,106
    Likes Received:
    142
    GPU:
    EVGA 3080 FTW3 GU
    Hi, sorry if I ask this but I am not sure whether I got it right or not: basically I installed the latest beta 3 version of AB, which is supposed to override nvidia's new fan management system. I have also installed the latest nvidia drivers, and set a customized fan curve using AB. As I am playing it looks like the fans are spinning at the speed I set, they get very loud when compared to the default settings, but I wonder if they are actually hitting the target I set or not. Could somebody shed some light on this? I own a 3080 FTW3 Ultra set on OC mode.

    Here is a creen of my fan curve:

    [​IMG]

    Thank you!
     
    sertopico, Nov 1, 2020
    #2677
  18. Deleted member 255716

    Deleted member 255716 Guest

    I have a little question about the last build of Afterburner Beta 3. I have got the Asus Strix 3090 OC who have 3 fans.

    Can I control the speed each of them?

    I use the last Studio Driver ;)

    @Hilbert Hagedoorn you during the review of the card how did you do that?
     
    Deleted member 255716, Nov 1, 2020
    #2678
  19. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    15,054
    Likes Received:
    2,263
    No need to be lazy, use search please instead of flooding this thread with things having zero relation to new version development. It was commented A LOT of times that fans controlled bypassing reference fan control implementation like iCX will never be supported. PLEASE no need to continue it in this thread.
     
    Unwinder, Nov 1, 2020
    #2679
    Deleted member 255716 likes this.
  20. Astyanax

    Astyanax Ancient Guru

    Messages:
    9,082
    Likes Received:
    3,114
    GPU:
    GTX 1080ti
    Last edited: Nov 1, 2020
    Astyanax, Nov 1, 2020
    #2680
Page 134 of 143

Share This Page