1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RivaTuner 2.07 approaching

Discussion in 'RivaTuner Advanced Discussion forum' started by Unwinder, Feb 4, 2008.

  1. Prod

    Prod Master Guru

    Messages:
    302
    Likes Received:
    1
    GPU:
    Evga GTX 980 1531/8001 WC
    nice can't wait for it. it will be nice to control both my GTX fans without ntune.
     
  2. Burnt_Ram

    Burnt_Ram Ancient Guru

    Messages:
    5,926
    Likes Received:
    0
    GPU:
    Zotac GTX 1050 Ti
    i can control both my cards fans with the current build, why can't you?
     
  3. Prod

    Prod Master Guru

    Messages:
    302
    Likes Received:
    1
    GPU:
    Evga GTX 980 1531/8001 WC
    are you sure both fans change. you might want to check by using a different program to check the temps. rivatuner doesn't show the right info for both cards, and setting the speed under the fan control area only sets the fan speed for the top card on the MB. not sure why but it doesn't show the right temps for bottom card to. Just the top card temp is right. Use something like HWMonitor after you set the speed in rivatuner and you will see that only one of the cards temps change. i will not use ntune ever again after the problems i ran into with it so when 2.07 is out it will be nice. i have tried changing the fan speed with all builds 2.0 and up.
     
  4. Burnt_Ram

    Burnt_Ram Ancient Guru

    Messages:
    5,926
    Likes Received:
    0
    GPU:
    Zotac GTX 1050 Ti
    i can hear one spin up and then the other as i adjust them each to 90%. go to the main tab and use the top drop down arrow to switch between displays to set each one seperately. trust me, both my cards are adjusted. :)
     

  5. Prod

    Prod Master Guru

    Messages:
    302
    Likes Received:
    1
    GPU:
    Evga GTX 980 1531/8001 WC
    wow thanks it worked never knew if you switched the card there that that was the way to do it. thanks man. nice raising it dropped my idle from 71c to 52c
     
  6. Burnt_Ram

    Burnt_Ram Ancient Guru

    Messages:
    5,926
    Likes Received:
    0
    GPU:
    Zotac GTX 1050 Ti
    hey np, glad it worked out for you :)
     
  7. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,318
    Likes Received:
    1,356
    Just a small update on 2.07 progress (or lack of it). Unfortunately 9600 sample still has not arrived, so don't expect new version release during closest 2 or 3 days.
     
  8. kirk121

    kirk121 Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    BFG 8800GTS
    Well that sucks that you are unable to continue work because you are waiting on some hardware. But it will be worth the wait as it always is, a few more days or even a week for your great program is just fine with me. Take as much time as needed, we will wait for you to be ready to release it.:)
     
  9. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,318
    Likes Received:
    1,356
    I guess that it is time to stop waiting for it, my 9600 sample seem to be lost during transporting and I don't think that it will be delivered (yes, Russian post SUCKS). Waiting for one more sample from different vendor will delay the release roughly by 2 more weeks, so it is not the best idea too. So my apologies to everybody for useless release delay.
    It looks like I'll still release 2.07 on Monday with limited 9600 support. And 9600 owners will have to wait a few months for complete support in 2.08, I hope that I’ll get a sample till that time.
     
  10. boogieman

    boogieman Ancient Guru

    Messages:
    1,935
    Likes Received:
    14
    GPU:
    MSI GTX 1080X
    Maybe the postman is a gamer. :D

    BTW, RT works great for me, no issues. I should say in regards to the OSD hotkey issue. ;)

    Thanks
     
    Last edited: Mar 2, 2008

  11. Burnt_Ram

    Burnt_Ram Ancient Guru

    Messages:
    5,926
    Likes Received:
    0
    GPU:
    Zotac GTX 1050 Ti
    lol, if he wasn't i bet he is now ...
     
  12. bodean

    bodean Master Guru

    Messages:
    780
    Likes Received:
    0
    GPU:
    Sapphire 7970
    Should be any time now, no?
     
  13. ati666

    ati666 Master Guru

    Messages:
    465
    Likes Received:
    0
    GPU:
    Gigabyte R9-290x Windforc
    please,Unwinder can you tell me when rivatuner 2.07 will be out?

    and i have seen rt 2.06 does not have the device id strap function for 8800gts512.

    can you bring this feature back in the new rt2.07?
     
  14. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,318
    Likes Received:
    1,356
    Can you read the previous postings please?


    Not earlier than I get any G9x based sample. Currently NVStrap doesn't support any G9x GPUs and it won't change in 2.07.
     
  15. bodean

    bodean Master Guru

    Messages:
    780
    Likes Received:
    0
    GPU:
    Sapphire 7970
    Any hour now......I'm assuming.
     

  16. kalispimenta

    kalispimenta Member Guru

    Messages:
    121
    Likes Received:
    0
    GPU:
    EVGA 8800GTX @680X1030MHZ
    WAITING:banana:
     
  17. Warboy

    Warboy Master Guru

    Messages:
    430
    Likes Received:
    0
    GPU:
    Geforce GTX 2080 Ti
    any luck on Vista 64-bit Driver signing? anyway to bypass it yet?
     
  18. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,318
    Likes Received:
    1,356
    They are signed by our friends from techpowerup.com for ages since v2.03.
     
  19. roguesn1per

    roguesn1per Ancient Guru

    Messages:
    9,511
    Likes Received:
    0
    GPU:
    GTX580
    lol gota love the people that cant read...or wait.
     
  20. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,318
    Likes Received:
    1,356
    Damn, that's good example of Murphy's law: my 9600GT has just been delivered. After 2 weeks of waiting for it, just a copule hours after I decided to stop waiting for it and released 2.07 with no full 9600 support declared. :)
     
    Last edited: Mar 3, 2008

Share This Page