RivaTuner 2.0 RC15.3 is on the way :)

Discussion in 'RivaTuner Advanced Discussion forum' started by Unwinder, Dec 20, 2004.

  1. jimmyd

    jimmyd Member

    Messages:
    10
    Likes Received:
    0
    BTW, THanks in advance...
     
    Last edited: Jan 3, 2005
  2. kernell3200

    kernell3200 Active Member

    Messages:
    88
    Likes Received:
    0
    GPU:
    Leadtek / A6600 GT/128Mb (580/1.06)
    does this Riva tuner CAn allow user to se temp monitor tab on PNY 6600 GT

    it is a way to unlok the temperature monitor on the 6600gt??
     
  3. mscbuck

    mscbuck Active Member

    Messages:
    53
    Likes Received:
    0
    GPU:
    Connect3D ATI Radeon x800XL
    Worked great on my BFG 6800 OC. I really only had one problem , and that is some o the ground textures in HL2 flickered. It's the only game which had a problem. Seems more like a driver issue.

    But otherwise, all is well! Thank you muchos Unwinder.
     
  4. Keitosha

    Keitosha Ancient Guru

    Messages:
    4,860
    Likes Received:
    103
    GPU:
    Vega56 8GB \ GT1030
    15.3 work better than the last one with my GF FX5700LE 256mb. Keep up the good work, Unwinder. I'm looking forward for more updates.

    Kei'
     

  5. hippotek

    hippotek New Member

    Messages:
    5
    Likes Received:
    0
    Hi Unwider!


    Great work, once again...

    Have you been investigating the possibilities of using RivaTuner with an SLI System? Will you be writing a version that actually supports both cards in an SLI System rather than only the primary adapter? Do you have the time and the hardware to look into this issue?

    Thx!

    Hippo
     
  6. StryK4er

    StryK4er New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    GF 6800
    Sorry 4 double posting but i couldn't delete my own post in the "RT RC15.2 Softmod" Thread.

    Wheeee... ! I used Rivatuner 15.3 and finally opened the 2 hw masked units. It didn't work with 15.2 be4.
    Asus GF6800:
    HW masked: Pixel unit 2 and Vertex unit 3.
    16x1.6 vp now.
    3Dmark03 be4 --> 9322
    3Dmark03 after --> 10304

    Almost a nice 1000 points gained. Thankz Unwinder 4 this :)
     
  7. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,441
    Likes Received:
    1,464
    Nope, if the board is not thermal sensor capable or the sensor is not supported by the forceware drivers.
     
  8. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,441
    Likes Received:
    1,464
    w2k/DualView issue:

    http://forums.guru3d.com//showthread.php?s=&postid=1045670#post1045670
     
  9. Burnout

    Burnout Guest

    @Unwinder
    My card (Aopen 6800LE rev.1) worked for 2 months at 12x1,6vp @ 360/860 but after upgrading Rivatuner to 15.3, I have not been anble to unlock anything anymore: I get artifacts in Windows. I even restored Windows from an image containing rivatuner 15.2 that was 2 months old: same thing happens. Does 15.3 write something in the bios on the card ?
     
  10. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,441
    Likes Received:
    1,464
    15.3 doesn't change anything in BIOS. It looks like your cards time just came to end.
     

  11. baroudan

    baroudan Member Guru

    Messages:
    101
    Likes Received:
    0
    GPU:
    HIS 1950 XTX
     
  12. penguino

    penguino Member Guru

    Messages:
    102
    Likes Received:
    0
    GPU:
    NVIDIA 6800 LE 128 MB || 19" LG 915F
     
  13. CooperX

    CooperX Guest

    is it possible to mod with the catalyst 4.12 a 9500 non-PRO to a 9700 with this version of rivatuner?

    i couldnĀ“t find any information in readme-file...

    or which version of catalyst would you prefer for modding?

    thnx for help
     
  14. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,441
    Likes Received:
    1,464
    Yes. Any currently abvailabe Catalyst 2.0 - 5.1 can be modded with the current release
     
  15. CooperX

    CooperX Guest

    ok, thnx for replying. it worked now after many times of try.

    but i am afraid i got a bad one of 9500 NP...
    After Softmodding there are many artifacts...

    :( :mad: :eek:
     

  16. tomruman

    tomruman Guest

    what about 6200 AGP ?

    as far i know latest release dont support 6200 in AGP version, Unwinder, could you look at that card? BIG THX and thank you for your great job with Tuner!!
     
  17. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,441
    Likes Received:
    1,464
    Will be added to the next release. In meanwhile you can easily add it yourself by editing [GPU_10DE] section of RivaTuner.cfg file and appending it with required PCI DevID.
     
  18. tomruman

    tomruman Guest

    cool but...

    how to obtain these numbers? tried to use X-bios editor but couldnt find anything usefull, please help..;-)
     
  19. tomruman

    tomruman Guest

    DID IT:)

    ok, dev id is 00F3, so i set adresses like that: F3h-F4h and it works, saw masked pixel units, changed 0 to 1, and everything looks to be fine ;-)
     
  20. gwx914

    gwx914 New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    Nvidia Geforce 6800 128MB
    I was softFireGL successes with 4.12 Driver. But I couldn't softFireGL with 5.1 Driver witch published in 2/1. Does anyone know how to support this problem? Thanks a lot~~^^"

    ps:My display card is Ati 9600 Pro.
     

Share This Page