Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by Hog54, Feb 22, 2021.
The 3090 update works for my 3090 Trinity OC
Thank you very much, very helpful.
Despite needing the updated live update you still have to unzip and install the update manually, all pretty straight forward though.
Doesnt work on mine really weird says unsupported card
19:52Rafael M: Good Day, Thank you for contacting Zotac USA customer support. The BIOS update for the resizable Bar is not available yet as of now. The Bios update Feature Resizable Bar will release later today Wednesday March 31 7pm Pacific / April 1 10am HKT. https://www.zotac.com/news/get-resizable-bar (will go live 7pm pacific time tonight) The blog will provide instructions on how to get the VBIOS files and how to flash and enable the Resizable Bar feature.
This is discrimination, only rich people can enjoy this feature
i followed all the steps everything went through but i get back into windows open nvidia control panel,information and it still says no ,wtf,yes my bios is updated with the correct bios,gpu bios update software went right through without a hitch,enabled in bios,still says no wtf
Is there any way to 'trick' BAR into working with a game that isn't yet supported in driver?
EDIT: seems that someone has already figured this out for DCS World
If it's a flag in the profiles then the inspector software is what I would think would work by adding said flag to other profiles as the easiest method but as to how it then scales and performs is going to vary.
Assassin's Creed Valhalla, Borderlands 3, Red Dead Redemption 2 those scale nicely otherwise it's 2 - 3% maybe up to 5% even a performance penalty could happen might be tough to spot any performance differences depending on how much of a difference it does.
There's likely a couple of other outliers that can be tested against for where bigger gains could be seen from having this active. NVIDIA's initial set of profiles probably covers many of them already though.
(Smaller performance gains are still gains but it's easier to compare and test when it really takes effect and provides a nice bigger boost.)
Anything doing a lot of copying or lookup of this data sounds like it'd possibly benefit from this so more recent D3D11 and D3D12 titles then I would imagine but as seen from earlier AMD benchmarks and now NVIDIA's even in the first wave of activated titles results will differ a bit.
Basing this off of scalper's prices or MSRP (manufacturer's suggested retail price)? 3060 is good to go with this feature.
X470 Taichi Ultimate 4.62 beta bios + Ryzen 9 3950X + ASUS Strix RTX 3090 OC = Resizable BAR works.
Same here, Zotac RTX 3080 Trinity.
Wait a few more hours for ZOTAC to officially release the firmware, it's quite possible the one you've tried is not working correctly.
cool,looks like ill be waiting on a bios update on an asrock x57 phantom even though support has been in the last bios and my current newest bios,i followed every step had no issues and it still says no in nvcp/gpuz so ,so its not something ive done,this on asrock
Sounds like Zotac.
"we have been notified that the VBIOS to enable the Resizable Bar feature will release march 31 2021 wednesday 7pm pacific / april 1 2021 thursday 10am hkt please stay tuned until then."
For 600 $, still expenssive
Can rbar work with COD Cold War?
6 PST has passed and ZOTAC still has nothing, stayed up for this
edit: ok downloaded the firmware, it does not work with my 3080 OC.
edit 2: had to rollback my VBIOS, the one I had flashed was the unofficial one with the extra 5% power boost, after flashing back to the stock VBIOS the Resizable BAR firmware worked correctly.
Just to let evertbody know on the Asus Tuf 3070 oc card you have to flash both bioses seperately .And before you do shut off rebar in the motherboard bios or the computer will crash when you try to start on the non flashed bios.