RadeonMod (Tweak Utility)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by theoneofgod, Oct 23, 2015.

  1. Passus

    Passus Ancient Guru

    Messages:
    2,097
    Likes Received:
    689
    GPU:
    3060Ti GamingZ Trio
    It does not engage your hardware, it is a bug saying that it is running, this will ONLY work on 6xxx series cards
     
  2. Prefix

    Prefix Member Guru

    Messages:
    169
    Likes Received:
    13
    GPU:
    Sapphire R7 260X 2GB
    Go play Destiny 2 with it on and off and watch ur FPS go up 10% in the same spot.




    Look here are benchmarks done here showing it working on 5700xt. from 57 to 62 an 8.8% increase in performance in Cyberpunk on a 5700xt.
    https://www.computerbase.de/2020-12/amd-smart-access-memory-test-radeon-rx-6800/
     
  3. Passus

    Passus Ancient Guru

    Messages:
    2,097
    Likes Received:
    689
    GPU:
    3060Ti GamingZ Trio
  4. SteamDeckFuture

    SteamDeckFuture New Member

    Messages:
    2
    Likes Received:
    1
    GPU:
    GTX 1060 Ti 6GB
    Hello, the Steam Deck was recently announced, and it doesn't have a freesync screen. Also seeing that newer games will not run at much more than 30fps on it (Valve even mentioning 30fps being the target), I started searching for ways to force half refreshrate vsync on AMD. To my disappointment and surprise, I came up short. There's apparently some SpecialK utility, but it's not universal (support for games has to be added by the dev), there's also RTSS scanline sync x/2 but that only actually works if you have a big beefy GPU with lots of headroom above the 30fps cap. This headroom will obviously not exist on the SteamDeck.

    So I come to you with a simple question, can this RadeonMod utility force half-refreshrate vsync globally, preferrably with triple-buffering? I know support for the SteamDeck's APU has to be added, but is it possible at the moment with the supported GPUs?
     

  5. Passus

    Passus Ancient Guru

    Messages:
    2,097
    Likes Received:
    689
    GPU:
    3060Ti GamingZ Trio
    It can if you have a older gpu .. from r9 2xx to rx 5xx

    5xxx and 6xxx dont support it properly and windows 10 has many issues with the program too

    should be marked as deprecated software really
     
  6. SteamDeckFuture

    SteamDeckFuture New Member

    Messages:
    2
    Likes Received:
    1
    GPU:
    GTX 1060 Ti 6GB
    Thanks a lot for the quick and simple answer! I guess I'll have to rely on Valve to do something... I just really hope it's not something they do for SteamOS exclusively since I want to use Windows on it...
     
    Passus likes this.
  7. Passus

    Passus Ancient Guru

    Messages:
    2,097
    Likes Received:
    689
    GPU:
    3060Ti GamingZ Trio
    Well good luck mate
     
  8. 100fps

    100fps New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Amd8690m
    Hi people pls I need someone who can tell how to get the least graphics on all settings cus I’ve just been typing random values cus I don’t care about graphics just FPS
     
  9. Banana4Nanners

    Banana4Nanners Member Guru

    Messages:
    193
    Likes Received:
    51
    GPU:
    6800XT
    Steam Deck runs on Linux, radeonmod is a windows utility
     
  10. ospiunes9

    ospiunes9 New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    R7 200 serie
    Can I make the settings with RadeonMod?
     

    Attached Files:


  11. OnnA

    OnnA Ancient Guru

    Messages:
    15,224
    Likes Received:
    4,481
    GPU:
    3080Ti VISION OC
    Radeon needs something like NV Inspector.
    Sadly, best Moders are on NV side :rolleyes:

    Somebody needs to check if our Lod adjustment still working with new drivers.
    IMhO they don't working same as NV side (More Crisp or blurrry).
     
    Plyra and NingNangNong like this.
  12. Espionage724

    Espionage724 Master Guru

    Messages:
    695
    Likes Received:
    299
    GPU:
    EVGA RTX 3060 XC
    I can't say I've noticed any difference on my hardware (RX 580, 2700X), but there's multiple programs that state Resizable BAR is enabled on both Windows and Linux.

    I'm not entirely sure it does anything beneficial on Windows or if it's even being used (knowing AMD it's probably not wired up in the drivers), but I'm confident Linux doesn't mess around with reporting it as enabled.
     
    Last edited: Sep 2, 2021
    Passus likes this.
  13. SaironNFLA

    SaironNFLA New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Radeon R7 250 1GB
    Hi, tell me plz how to optimize the graphics in DayZ on R7 250 1 GB. Is it possible to degrade the textures in the same way as on Nvidia Profile Inspector?
     
  14. Skinner

    Skinner Master Guru

    Messages:
    544
    Likes Received:
    44
    GPU:
    Sapphire RX6900XT
    Is there a possebility to force anisotropic filtering in dx12?
     
  15. OnnA

    OnnA Ancient Guru

    Messages:
    15,224
    Likes Received:
    4,481
    GPU:
    3080Ti VISION OC
    Should work if You set it via Radeon Settings or RadeonMOD.
    Test and report back :)

    Enchance or force...
     

  16. qrichard

    qrichard New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Amd ryzen 3 3250u
    How do i change the saturation in the settings?
     
  17. Ded4k

    Ded4k New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    rx 570 8gb
    Hello everyone! Tell me how to compress textures as much as possible (without LodAdj)
     
  18. Zyst

    Zyst New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    RX 570 4GB
    Hi! im currently using RadeonMod and i need some help towards ShaderCache.

    I have set it to 0x3200 or whatever it is, which is the enabled option, right?

    What should i put "ShaderCache_Na" on then?

    And why does it say i dont have registry to modify when trying to enable DX9 tweaks?

    Amazing program. Much love.
     
  19. pneumatic

    pneumatic Member

    Messages:
    21
    Likes Received:
    0
    GPU:
    R9270
    Just wanted to report the link to the latest version (1.0.16) in OP appears to be broken and the mirror is an older version.

    Luckily I had a copy on my other machine :)

    Also thanks for the app -- allowed me to enable dithering via DisplayPort on an R9 380 (keyname DP_DisableDither).

    Not sure why AMD thought it should be disabled by default on DisplayPort but not HDMI.

    In any case gradients are smooth now and I can modify the monitor calibration via Radeon control panel or video card gamma table without banding artefacts .
     
  20. guiuus

    guiuus New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    AMD radeon HD 6970M
    Hi guys,i want to do the lowest possible Lod for Fortnite but i don't know how do i config lod with radeon mod,can any1 teach me how to config this program?
     

Share This Page