RadeonMod (Tweak Utility)

what those it do preload delay and unload delay

 

Make it more responsive
I have it for 100ms

 

So you are using value 64 both preload and unload??
and what about memorysizethreshold??

 

Hexa:
c8 200
64 100
64 100

I do not know what Memsize do tho, i have it on default and all is OK.

 

Ok
btw thank you OnnA for responding

 

Also now im sure That Our RadeonMOD is working as intended with:
Fiji uArch, Polaris uArch and Vega uArch.

I have it installed for quick Option change if needed.

 

Hello, I'm new to this thread. Can this software be used to mod rx 580's for mining? If so do you have any setup tutorials?

 

Only one thing, you can switch in Adrenalin for GPGPU calculations not Gaming.
Then you need to search some Mining sites/forums on how to.
Radeons are best for Calculations etc. OCL is here for.

 

i have a question-what correct value should be set for Main3D_Set? by default i have entry like this 0x302031203220332034203500. As far as i may assume(3020=0 frame,3120=1 frame,3220=2 frames and etc) if i need to set prerender frame 1 i should entry 0x3120 or it has to be 0x3100?

 

It's for the better to not chnage this.
But if you need: 2 or 3 is OK (Leave on default = 3)

0x3000
0x3100
0x3200
0x3300
You can see patern in Regedit .../0000

 

i mean for example if i wanna set to 1 prerender frame what entry should i use 0x3120 or 0x3100 ?

 

What are the best settings for maximung smoothness? i have high fps rate in many games but im not feel it smooth at all, my rig is rx580 8gb, 3570k@4,5ghz and 8gb ram, this are my settings now https://gyazo.com/e01aa8911bfedbf87c98907cc3272df2

 

hi am new here i own rx580 with 27ins monitor with 2ms and FreeSync and 75hz what setting should i use with this with

hi am new here i own rx580 with 27ins monitor with 2ms and FreeSync and 75hz what setting should i use with this with mine and what setings in rad mod to thanks

 

75FPS/Hz is 4b in Hex
4b means 75 (If doubt, open regedit and play with settings to check what is what)

All you need is to make FPS Cap like Freesync.
If FPS Cap do not behave good (for me in BF1) just use RTSS (RiveTuner of our Unvinder)
Make sure to have Enchanced Sync ON.

Hope this will help You

 

Anisotype_DEF What is the value for 16x

 

For some reason the thread lost it's sticky status but thanks guys for your support.

 

2/4/8/16

 

Hey, I'm new to all this and I play games like CSGO, so I really do not want vsync and all that. Can any one of you guys share a full tweak guide for competitive shooters for as much fps possible? Thank you!

 

In Adrenalin -> Set all to Normal (textures useally are set to High)
All other stuff leave as default.
Use Enchanced Sync -> and get FreeSync Monitor with min. 120Hz (Best are 144-240Hz)

 

Thank you! But the one I am really looking for are RadeonMod tweaks. It would be nice if you could show me some of your settings
I am not planning on getting another monitor because this is a Macbook Pro 2017 15inch with Windows 10 installed on an external SSD.
I get 300 fps when I play but I am looking forward to remove some of the stutters I get.