Discussion in 'Videocards - AMD Radeon Drivers Section' started by theoneofgod, Oct 23, 2015.
^^ No ATM
Hi I'm just new in this forum and also in 3D Graphic.
With the last official driver for my old Ati Radeon HD 3670 on Windows 10, it work in Full HD but all 3D features didn't work and when i tried to vies some little 3D files on 3D builder, after some secons my laptop switched off and auto-shutted-down!
So now i tried to download RadeonMod and CRU Restart
I launched RadeonMod and try to fill all the fields with "not found" value.
Now the question is: How can i test if the all 3D funtions/features of my old Ati Mobility Radeon HD 3670 work on Windows 10?
Please, if you can, explain it step by step, i'm not an expert.... not yet ;-)
Thanks a lot for take some times to answer to me
Hare Krishna, Marco
P.S. I tried some 3D Benchmark, also some basic one, and after some seconds my pc Autoshutdowns itself. I tried also DX9 and OpenGL with the same results. Can anyone Help Me ?? Thanks in Advance!
As you said 3670 is an ancient card...and your pc autoshutdowns because of temperatures of course, and maybe the Life of this 'GPU' is coming near the end.
I want to use drivers without Radeon Control Settings, as it still installs the DVR-thingy. Is Freesync enabled by default? And how do I force enhanced sync? I have set VSyncControl_DEF to 3 and VsyncControl to 0x3300. Would this do the trick?
TurboSync and AntiStuttering have to be set to 0x3100
dword:00000046 = 70FPS
For no Vsync Gameplay (99% Games don't need this anyways if Freesync is used)
Lower latency = better FPS & Image smoothness.
I have 60FPS (not 60V-sync) in FM7 in DX12.0 and it is working like a charm
Thanks. I will actually use framerate limiter now. It gave me some problems in the past, but maybe it improved. How do I disable Vsync? I can select 1 through 4, 3 being dynamic, 4 being normal vsync.
0x31000 is the default value in my registry (Enchanced Sync that is)
IMO leave it as it is.... turn off in-Games always
The 1st post doesn't mention Radeon 400 and 500 series, but I've Radeon RX460 and the tool recognized it and opened its Reg settings. Does it mean, I can use RadeonMod for this GPU?
Also, the card has 2 fans, and around 45C they constantly cycle On/Off with clicking sound from the board relay. Is it possible to set the fans constantly running at low RMP around 45C card temperature, and what Reg setting it would be? I tried Wattman curves, but couldn't accomplish that. May be another tool can do it? I know SpeedFan can control that, but I prefer to change a Reg or BIOS setting.
Yes you can, IMO it will work for any ATI tek
Reg settings may differ and not overlap for various cards. How about fan control thresholds for 0DB feature at idle - any Reg setting?
any option to force half refresh rate / double vsync in radeonmod ?
Not yet implemented w/Relive
But not needed if FreeSync is in use...
can anyone give me the best performance settings for hd 2600 pro?
Profiles location on disk?
Where RadeonMod is located.
guys, I need help, and I'm newbie in this gpu tweaks as its RadeonMod
I know game is trash (PUBG) and isnt well optimized, but I would like from you to tell me which settings I could change for at least any fps boost...
this is what I have found and changed, reading some older pages here:
in tweaks: ULPS - OFF
in UMD: FlipQueueSize = 0x3100
Main3D_DEF = 1
Main3D = 0x3100
Main3D_SET = 0x3100
ShaderCache = 0x3200
TextureLod_DEF = -1 (for sharpness)
Tessalation = OFF
AntiStuttering = ON
in 0000: Disable DMA Copy = 1
Disable Block Write = 0
MonitorResponse = 8000
StuttedMode = 0
and that's it...
IM RX 470 4GB user, i3 6100
^^ Looking good IMO
Try to tweak only:
FlipQueueSize = 0x3100 up to 0x33
Main3D_DEF = 1 up to 3
Main3D = 0x3100 up to 0x33
Main3D_SET = 0x3100 up to 0x33
Try 32/33 and 30 or run RadeonPRO and try there some Values
ey thank you mate
I think that were default settings already on my gpu and I feel better with this new one (0x31) but I could test it a bit more
thank you alot again
New Tweak add-on incoming:
Time saver <- Yes now you have Default like you want (I have >30Games with Profiles in Adrenalin, no more Time consuming Tweaking)
Chill specific Vaules for Target Framerate (usually good for FreeSync Gaming):
CN responce time: