RadeonMod (Tweak Utility)

Discussion in 'Videocards - AMD Radeon Catalyst Drivers Section' started by theoneofgod, Oct 23, 2015.

  1. robnitro

    robnitro Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    XFX RS RX 480 8gb
  2. PrMinisterGR

    PrMinisterGR Ancient Guru

    Messages:
    6,857
    Likes Received:
    3
    GPU:
    Sapphire 7970 Quadrobake
    It only works in full screen with vsync off. The only combo that makes it utterly useless.
     
  3. falconer

    falconer New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    Radeon HD5450
    Yeah I use RTSS too for FPS limit but i tried to limit it just with RadeonMod but it wont work so I thought someone could have had this problem.
     
  4. sagael

    sagael New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    7670m
    With this I can deactivate the hypermemory of my 7670m?
     

  5. msmucr

    msmucr New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    AMD
    Could someone give me a tip for adjustment of range of DXVA accelerated video at HD4350 (I know ;)).
    I've recently upgraded to Windows 10 at one machine with bundled driver 8.970.100.9001 without CCC.. It's out of its support phase and full blown AMD driver won't be released.
    Otherwise the card is working well, but this greyish accelerated videos drives me crazy.

    I've tested RadeonMod with DynamicRange_DEF and DynamicRange_Enable_DEF, but the driver seems to ignore those settings regardless of combination.
    Desktop colors are fine, but whenever I drag'n'drop some mp4 video to Chrome for the test, black is at 16.

    The same thing for video playback was necessary to set also with Nvidia card, when I tested..

    So if you have any idea, how convince this Radeon driver to play properly, I'd really appreciate that.

    Michal
     
  6. OnnA

    OnnA Ancient Guru

    Messages:
    3,451
    Likes Received:
    53
    GPU:
    Nitro Fiji-X HBM 1150/570
    _SET - Means: Range, or working variables etc.
    Look for this when setting DEF
    DynamicRange_DEF=1 or 100 ?
    DynamicRange_Enable_DEF=1 or 0

    Or just try and install CCC over the new ones (Only CCC, delete drivers)
    Then "DynamicRange_NA"="0" (means avaible in CCC)
     
  7. msmucr

    msmucr New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    AMD
    Thank you for the reply, OnnA.

    That's what I've tried first...
    Those keys wasn't present there, so I've created them and tested all variants.
    According to the description in RadeonMod, DynamicRange_DEF at 1 is limited and 0 is full range 0-255. Now I also tested value 100 as you've suggested.
    DynamicRange_Enable_DEF should enable that, but regardless of 1 value there, it it isn't applied to played video.

    I've tried to do that, but last released Catalyst for Windows 7 or beta for 8 isn't possible to install. It's possible to extract just CCC and install it, but it doesn't start with Win 10 bundled driver.. with the message, there's no card, it can control.

    Anyway thanks again!

    Michal
     
  8. korino1

    korino1 New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    rx460
    Hello! I have a question, maybe can somebody help to me with it?
    In RadeonPro exist settings like -TextureLOD

    Is it possible to add somehow in registry inside windows to make an effect?
    Very good options for me.
    Or Maybe it exist in RadeonMOD? But I searched and didn't found. Ofocurse there are several options like - LodAdj - but it makes only sharpnes in lower setings. But when I am making negative value it just adde Sharpnes!. I am wanna make textures more "candy" like with RadeonPro in TextureLOD with negative values.
    Or it is a combination effect. I am used mipmapquality maximup +TextureLOD in negative in radeonPro.
    It makes an affect like veeeery good textures with clear structure. How to make this effect using radeon Mod?!?
     
    Last edited: Jun 13, 2017
  9. VAAS

    VAAS Member Guru

    Messages:
    143
    Likes Received:
    0
    GPU:
    Asus R9270OC 2Gb
    does this support the RX4xx series?

    the UMD folder on my system is only found under "0001" and "0002"
     
  10. OnnA

    OnnA Ancient Guru

    Messages:
    3,451
    Likes Received:
    53
    GPU:
    Nitro Fiji-X HBM 1150/570
    This one -> AMD-Catalyst-15.11.1Beta-Nov14 (delete from there drivers, leave CCC alone)
    or this -> https://1drv.ms/f/s!ArwXzixQ74Jbct3vBjB2sIl49cI
    Remember that some options are Obsolete now.
    ATI need to Re-do this in new fashion way for ReLIVE :bonk:
     

  11. johnriper

    johnriper New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    3x r9 290
    can you add to RadeonMod the ability to spoof device id?

    hello i have 2 xfx r9 290 not unlockable and one asus matrix r9 290x on my system. In dx12, crossfire is enabled but time spy in 3d mark only uses the first card the asus one. If i test tomb raider with dx12 enabled only the first card works, but in dx11 all of them work, and in fire strike 3d mark again again all of them work. I think this is a problem with dx12 crossfire with different device ids in cards. I tryied to write bios from r9 290x to my 2 xfx cards, but ati flash changes device id from 67B1(290) TO 67B0(290X) but when i use gpu z in windows the device id is not changed it is still 67B1, SO NO LUCK WITH XFX cards, My second option was to try to hex edit the bios of the asus one 290x, and change it to 290, still no luck, bios flashing went ok but the device id still has not changed, i think that there is another way windows detect device id, not only from the bios, thats why i m asking for help in spoof device id, in hackindos with clover this is easy but i have not discover a windows way yet...
    thanks
     
  12. OnnA

    OnnA Ancient Guru

    Messages:
    3,451
    Likes Received:
    53
    GPU:
    Nitro Fiji-X HBM 1150/570
    New Tweaks for R^MOD


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD]
    "Tessellation_OPTION_DEF"="2"
    "Tessellation_DEF"="6"
    "Tessellation"=hex:36,00,00,00
    "Tessellation_OPTION"=hex:32,00,00,00
    "Tessellation_SET"=hex:31,20,32,20,34,20,36,20,38,20,31,36,20,33,32,20,36,34,\
    00
    "Main3D_DEF"="3"
    "Main3D"=hex:33,00
    "AreaAniso"=hex:30,00
    "MLF"=hex:30,00
    "EQAA"=hex:30,00
    "SurfaceFormatReplacements"=hex:31,00
    "ShaderCache"=hex:32,00
    "PowerState"=hex:30,00
    "TurboSync"=hex:31,00
    "AntiStuttering"=hex:31,00
     
  13. jLuca

    jLuca New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    R7 260X 1GB
    There is a key, "PP_PhmSoftPowerPlayTable"=hex, that contains the power play tables, it defines the power limit %, the power states (clock voltage and memory voltage). It would be nice if you can add that to the program, it can bypass flashing a new bios ^^
     
  14. kawaiikage

    kawaiikage New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    AMD 7730m
    Hi,

    I'm kinda new to this so have little to no idea on how to use the settings in RadeonMod.
    There are these settings for nvidia Inspector which I'd like to use in my AMD GPU.

    i[dot]imgur[dot]com/vwCV4pU[dot]png
    (can't post links sorry, just replace the [dot] with .)

    I tried tweaking some using the description they have. but the results are not similar to the ones expected. Can someone help me with this please?
     
  15. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    3,951
    Likes Received:
    4
    GPU:
    AMD 7950 (CFX retired)
    Updated to 1.0.16

     
    Rambo likes this.

  16. rwx

    rwx New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    Radeon HD7970
    Hey,

    Profiles doesn't seem to work.
     
  17. Rambo

    Rambo Master Guru

    Messages:
    200
    Likes Received:
    3
    GPU:
    RX 560 w8 4 Vega 56
    Do "UMD -> TurboSync & AntiStuttering". values work with older GPUs? BTW. that values are visable only with "show real names" enabled.
     
    Last edited: Aug 29, 2017
  18. user1

    user1 Master Guru

    Messages:
    531
    Likes Received:
    11
    GPU:
    hd 6870
    found PP_ODNFeatureEnable

    allows you to enable/disable wattman/overdriveN support by setting the hex value to 1 or 0
     
  19. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    3,951
    Likes Received:
    4
    GPU:
    AMD 7950 (CFX retired)
    What part doesn't work?

    They should do. OnnA should have more details.

    Already added for next release. Thanks.
     
  20. rwx

    rwx New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    Radeon HD7970
    I created a default profile with all settings set to their default values and another with e.g. flip queue size set to 1. If I load the other profile and later the default profile, it won't set flip queue size back to its default. Am I doing something wrong?
     

Share This Page