RadeonMod (Tweak Utility)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by theoneofgod, Oct 23, 2015.

  1. OnnA

    OnnA Ancient Guru

    Messages:
    13,702
    Likes Received:
    3,530
    GPU:
    3080Ti VISION OC
    Have no clue about it, maby in time i will ;-)
     
  2. OnnA

    OnnA Ancient Guru

    Messages:
    13,702
    Likes Received:
    3,530
    GPU:
    3080Ti VISION OC
    Always better to restart, 100% Working that way :)
     
  3. incneet

    incneet Member

    Messages:
    37
    Likes Received:
    0
    GPU:
    ASUS GTX 1060 6GB
    guys, i want change FQS for 2, where i change? just Main3D_DEF?

    [​IMG]
     
  4. OnnA

    OnnA Ancient Guru

    Messages:
    13,702
    Likes Received:
    3,530
    GPU:
    3080Ti VISION OC
    if not found just give 2 or 3 in that Box and its done
    Always restart after Tweak.
     

  5. Prefix

    Prefix Member Guru

    Messages:
    169
    Likes Received:
    13
    GPU:
    Sapphire R7 260X 2GB
    Turning 10 bit support on won't cause any issues will it?
     
  6. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,623
    Likes Received:
    259
    GPU:
    RX 580 8GB
    I can't be certain either way. If it does just boot into safe mode and disable it or restore a backed up registry file.
     
  7. gustavobrp

    gustavobrp New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    8GB
    Hi guys, i have an Radeon HD 7730 mobility card. In the radeon mod, there is an option for deactivate the crimson power saving. Does this makes any difference in the perfomance of my card or it only aplies for the r9 cards?
     
  8. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,623
    Likes Received:
    259
    GPU:
    RX 580 8GB
    I believe the "problem" was with newer GPU's, GCN 1.1 and above, mainly GCN 1.2 Fury GPU's. You could try it.
     
  9. LocoDiceGR

    LocoDiceGR Ancient Guru

    Messages:
    2,416
    Likes Received:
    839
    GPU:
    Gigabyte 3060 Ti
    only 300 series / fury except the 370 have this feature.
     
  10. Tree Dude

    Tree Dude Master Guru

    Messages:
    532
    Likes Received:
    3
    GPU:
    Radeon R9 270X 2GB
    That is a GCN 1.0 card, so it may help. But keep in mind it is a laptop and you are going to severely hurt battery life by not letting the card go into power saving mode.

    I would be sure all power saving features are turned off for when plugged in within the power management settings in control panel first. That has burned me a few times in the past.
     

  11. Undying

    Undying Ancient Guru

    Messages:
    16,667
    Likes Received:
    5,574
    GPU:
    Aorus RX580 XTR 8GB
    Feature is for 390/Fury cards. It dosnt do anything for GCN1.0. With couple of drivers lately AMD even removed it from Crimson if your card have no use for it.
     
  12. LocoDiceGR

    LocoDiceGR Ancient Guru

    Messages:
    2,416
    Likes Received:
    839
    GPU:
    Gigabyte 3060 Ti
    Exactly! What he said ^
     
  13. valkyrjur

    valkyrjur Member

    Messages:
    22
    Likes Received:
    0
    GPU:
    AMD 6700XT
    If your monitor or tv does not support 10 bit color mode you will have a nice black screen on boot...
     
  14. qwertydrive

    qwertydrive Member

    Messages:
    14
    Likes Received:
    1
    GPU:
    Sapphire rx 480 nitro
    How do you change the Flip queue size with this RadeonMod.? i need to change mine to 2

    do i just select 2 from the drop down menu or type in 0x3200, I tried doing both of those but having trouble getting it to work.
     
  15. dbcooper

    dbcooper New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    AMD HD 7790 (2GB)
    Hi All, I am trying to activate/control deblocking and mosquito noise reduction in the latest drivers on Windows 10 x64 for my HD 7790 (Crimson Edition 16.6.1 Hotfix). I was hoping that I could get some help with the registry values (not covered in the tool).

    From [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD\DXVA]

    I assume the ENABLE_DEF values should be set to 1. I want to set the values to 5 or 10 for the strength. Any idea what to use for the hex values? Also, what does the 50 mean in the _DEF values?
     

  16. OnnA

    OnnA Ancient Guru

    Messages:
    13,702
    Likes Received:
    3,530
    GPU:
    3080Ti VISION OC
    ...\0000\UMD\DXVA]
    "DeBlockingValue"=hex:01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 (its ON)

    "Deblocking_DEF"="50" (leave it)
    "Deblocking_ENABLE_DEF"="0" (leave it)

    "Deblocking"=hex:35,00,30,00,00,00 (actual Value MAX to 50)
    "Deblocking_ENABLE"=hex:30,00,00,00 (Default)
    ==
    [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\amdkmdag\UMD\DXVA]
    "OvlTheaterMode_DEF"="0"
    "TrueWhite_DEF"="0"
    "LRTCCoef_DEF"="100"
    "OvlTheaterModeType_DEF"="0"
    "LRTCEnable"="0"
    "LRTCEnable_DEF"="0"
    "WhiteBalanceCorrection_DEF"="0"
    "BlueStretch_DEF"="1"
    "StaticGamma_ENABLE_DEF"="0"
    "DemoMode_DEF"="0"
    "DI_METHOD"=hex:2d,00,31,00,00,00
    "DynamicContrast_ENABLE_DEF"="0"
    "Detail_DEF"="6"
    "Detail_ENABLE_DEF"="1"
    "Denoise_DEF"="64"
    "Denoise_ENABLE_DEF"="1"
    "OverridePA_DEF"="0"
    "ColorVibrance_DEF"="40"
    "ColorVibrance_ENABLE_DEF"="1"
    "VForceUVDH265"="0"
    "3to2Pulldown"="1"
    "3to2Pulldown_DEF"="1"
    "DI_METHOD_DEF"="-1"
    "StaticGamma"="100"
    "StaticGamma_DEF"="100"
    "CmMode_XvYCC"=dword:00000001
    "MosquitoNoiseRemoval_DEF"="50"
    "MosquitoNoiseRemoval_ENABLE_DEF"="1"
    "Deblocking_DEF"="50"
    "Deblocking_ENABLE_DEF"="1"
    "CameraShake_ENABLE_DEF"="0"
    "CameraShakeStrength_DEF"="1"
    "CameraShakeDelay_DEF"="1"
    "CameraShakeZoom_DEF"="95"
    "CameraShakeDisplayLogoVersion"="0"
    "ColorVibrance_DE_MIN"="0"
    "Fleshtone_DEF"="30"
    "Fleshtone_DE_MIN"="0"
     
    Last edited: Jun 29, 2016
  17. Hexxus

    Hexxus New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    r9380 2gb
    Just recently found your program and its great. Quick question is how can I undo any changes that I have done. I forgot to backup the registry before I made the two changes I made. I have this custom entry here: i.imgur.com/fNpQN6U.png and when I try to select another option, it doesn't change. I have uninstalled the drivers, used the amd cleanup utility and DDU to remove as much as I can but upon reinstall of drivers that option is still set to custom.
     
  18. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,623
    Likes Received:
    259
    GPU:
    RX 580 8GB
    DDU should work, not sure why it doesn't. Have you tried "Restore Defaults"?
    There is an option to backup the registry on first launch but it's off by default. I will change that. Try DDU again in safe mode.
     
    Last edited: Jun 30, 2016
  19. Hexxus

    Hexxus New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    r9380 2gb
    I did it twice before making an account to post here. Uninstalled AMD drivers through the control panel, ran the amd cleanup utility and then safemode booted DDU.. This is a fresh install of Windows 10 and before I used the app you've made I didn't have that custom option. I also tried reverting back to defaults and still no luck. Only two options I changed were the low/power saving ones.
     
  20. xeltic

    xeltic Member

    Messages:
    32
    Likes Received:
    0
    GPU:
    AMD R9 280x
    anyone have optimal settings for fluid motion?
     

Share This Page