RadeonMod (Tweak Utility)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by theoneofgod, Oct 23, 2015.

  1. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,581
    Likes Received:
    240
    GPU:
    RX 580 8GB
    Not to worry. I've added a couple of things to make it easier to know what to do.
     
  2. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    TOG (You now have an acronym :)), I haven't tried your app yet but have been following this thread closely.

    What tweaks would you say are crucial? Absolutely must haves?
     
  3. sekta

    sekta Master Guru

    Messages:
    200
    Likes Received:
    0
    GPU:
    Nvidia GTX 1080
    Half the tweaks they don't even have a clue what they do, or provide any screenshot comparisons or benchmarks. Try enabling the shader cache globally, other than that I would recommend just leaving stuff alone.
     
  4. OnnA

    OnnA Ancient Guru

    Messages:
    12,744
    Likes Received:
    3,171
    GPU:
    Vega XTX LiQuiD
    @sekta
    No my Bro, I have a clue what almost everything does :D (don't forget that :eatme2: )


    @mR Yellow

    http://forums.guru3d.com/showthread.php?t=398484

    "PP_MCLKStutterModeThreshold"=dword:00000255
    "StutterMode"=dword:00000000
    "DisableDMACopy"=dword:00000001
    "DisableBlockWrite"=dword:00000000
    "EnableBlockWrite"=dword:00000001

    for DX9
    "KMD_APlusISharedMiniSegmentSize"=dword:0x4
    "KMD_APlusISharedMiniSegmentOptions"=dword:0x7

    Rest is for Quality mostly, so no FPS boost ;-) But when you give HQ Aniso the textures are way better IMO
     

  5. ksio89

    ksio89 Active Member

    Messages:
    54
    Likes Received:
    0
    GPU:
    Radeon HD 8850M@8870M
    Thanks, man awesome tool! Now it's a matter of a couple of clicks to enable/disable ULPS on my notebook! I had to restart everyrime I wanted to toggle it on/off.

    I used speedfan to confirm it's indeed working: when ULPS is on, GPU sensor temps get to 0 ºC as the Radeon GPU is turned off to save power. Thanks you very much mate :thumbup:
     
  6. mystik

    mystik Member

    Messages:
    18
    Likes Received:
    1
    GPU:
    GB RX580 Aorus
    re: blockwrite,
    so i've heard over time that it's supposed to be "disableblockwrite" or "enableblockwrite",
    but not both. are you just changing both of these as a shotgun approach because we're
    not sure which one actually works?

    re: DX9,
    in your thread, you have these options set as
    Code:
    "KMD_APlusISharedMiniSegmentSize"=dword:0000041 4
    "KMD_APlusISharedMiniSegmentOptions"=dword:0000041 7
    (not sure what those spaces are, they are in your original post).
    in RadeonMod, these are set as
    Code:
    "KMD_APlusISharedMiniSegmentOptions"=dword:00000007
    "KMD_APlusISharedMiniSegmentSize"=dword:04000000
    Which is the proper setting? In your thread, it seems like you're supposed to put the KMD
    keys where everything else is, but RadeonMod puts them into a \services\amdkmdap key.
     
    Last edited: Nov 28, 2015
  7. ilflores

    ilflores Member

    Messages:
    17
    Likes Received:
    0
    GPU:
    SAPPHIRE HD7950/3GB GDDR5
    Sorry guys for my ignorance: Will this tool get any better for a graphic designer using apps like Photoshop, Premiere and After Effects plus Autodesk apps?

    Will a modded driver help on this? Where I can get it?
    Thanks so much in advance for your help.
     
  8. xodius80

    xodius80 Master Guru

    Messages:
    773
    Likes Received:
    10
    GPU:
    GTX780Ti
    i don't advice it, my logic is that you would want stability so you don't loose your work while executing these apps right?

    in working scenarios for me is

    stability > speed.
     
  9. BradleyW

    BradleyW Master Guru

    Messages:
    301
    Likes Received:
    0
    GPU:
    R9 290X CFX
    Have anyone reported the shader cache issue to AMD yet?
     
  10. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,581
    Likes Received:
    240
    GPU:
    RX 580 8GB
    Flip queue. Dithering. Shader Cache. Custom Resolutions. LodAdj. ULPS. The power saving options could be useful in certain situations. DX9 tweaks. StutterMode/StutterModeThreshold has been known to improve performance slightly. The Tessellation options are useful. You can save profiles so you can always quickly change through different settings to test or after a driver install.
    For CCC the enhancements can be useful.

    I haven't spent that much time benchmarking things, I've been too busy fixing bugs so that it works for everyone.

    It's nice to know the effort put into writing the program was not wasted...

    Thanks :)

    I don't think they wanted it enabled for every single application that's able to have their shaders cached.
     
    Last edited: Nov 28, 2015

  11. therandomizer

    therandomizer New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    R9 270X
    Anyone here tried changing the flip queue size to 1 while using crimson drivers on dota 2 or csgo? Is there a difference? Also what is the name of FSQ here? Thanks!
     
    Last edited: Nov 28, 2015
  12. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,581
    Likes Received:
    240
    GPU:
    RX 580 8GB
    Under Options uncheck Show Real Names, it helps.
    I've tried 1 and noticed a difference but it could placebo. It would be great if you gave it a go and let us know how it worked for you.
     
  13. OnnA

    OnnA Ancient Guru

    Messages:
    12,744
    Likes Received:
    3,171
    GPU:
    Vega XTX LiQuiD
    You'll need to use Latest updates (check FAQ)
    Radeon will Utilise OpenCL for some programs: Photoshp/Premiere etc. but i think you'll need at last CS6 or That new One CC :)
     
  14. OnnA

    OnnA Ancient Guru

    Messages:
    12,744
    Likes Received:
    3,171
    GPU:
    Vega XTX LiQuiD

    Yep it paste it like that.
    Now i have Proper one (to import):

    "KMD_APlusISharedMiniSegmentSize"=dword:0x4
    "KMD_APlusISharedMiniSegmentOptions"=dword:0x7

    ThX for pointing it out, now it's Proper.
    I've read about it in Overclockers ;-)
     
  15. pimpineasy

    pimpineasy Master Guru

    Messages:
    225
    Likes Received:
    10
    GPU:
    1050ti/Rx570
    For those who haven't figured out the shader cache, Global Settings - Shader Cache=Amd Optimized, means that it is disable for most programs and games. Turn Global Settings - Shader Cache=off, then make a profile for your game or program and turn shader cache on. Open C:/users/%user%/appdata/local/amd/dx cache. Verify File.

    Thanks for making tweaks easier to apply!
     
    Last edited: Nov 29, 2015

  16. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,581
    Likes Received:
    240
    GPU:
    RX 580 8GB
    You can also set it on globally. It's under the Info in RadeonMod.

    You're welcome :)
     
  17. therandomizer

    therandomizer New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    R9 270X
    Just tried it out multiple times, I "think" it makes a difference. I tried it out in CSGO, Dota 2 and Skyrim. It's much more noticeable in CSGO. Also I only need to change the "Flip Queue Size Default" option right? Not "Flip Queue Size" and
    "Flip Queue Size Set"?

    Anyone else tried with FQS with 1 using the Crimson drivers?
     
  18. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,581
    Likes Received:
    240
    GPU:
    RX 580 8GB
    I change both both Default and the standard value so it doesn't get reset on reboot.
    Set isn't important for what you want to do.
     
  19. therandomizer

    therandomizer New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    R9 270X
    All good right?

    [​IMG]

    Also if I didn't backup the registry at first, a simple uninstall then install of the drivers would do the trick right?
     
  20. WarDocsRevenge

    WarDocsRevenge Master Guru

    Messages:
    294
    Likes Received:
    0
    GPU:
    Fury-x Crossfire

Share This Page