Quadro 340.52 whql

Posted this in the 340.43 thread, but will duplicate it here since you're asking:

"I have the same issue in 3D content with both 337.88 and 340.43 beta drivers.
Any movement or scene change causes weird flickering/choppiness. It also makes eyes sore, similar to when you have your left/right-eye-first setting set up incorrectly, but this problem is not affected by that setting. Only downgrade to a driver earlier than 337.88 solves the problem.

If you pause the movie where movement with that effect is present, it looks OK. Thus, it is only visible in motion.

My setup:

The PC is hooked up to a Panasonic VT50 HDTV via HDMI (also with DVI-HDMI adapter since GTX 690 does not have HDMI). The effect is present in any movie I tried, e.g. "Rio 2". The display resolution: 1920x1080.

Used software: PowerDVD 13/14 and TotalMedia Theatre 6.7.1.199

Graphics card/GPU make and model: GTX 690
CPU make and model: Intel i7 3770k
Amount of system memory: 8GB
Motherboard make and model ASUS Maximus V Formula
Motherboard BIOS version: 1802
3D TV: Panasonic VT50
Sound card make and model: Creative ZxR
Operating System: Windows 8.1 x64"

 

And where is this post?

Also I have windows update set to check for updates and not install and I also have the device manager set not to update drivers

 

This is still on the same schedule. Driver that will introduce this feature is targeted towards the end of the year.

 

I haven't tried this latest quadro but folks are sayin it smooths out watch dogs a little.
hoping the next driver will do that too. not had a single driver crash since my new build a week ago now. (i'm on 337.88)

 

OMG, OMG, he is ALIVE people, aliveeee....

now give us what we want.

 

Intel also posted a new graphics driver today (beta). IT'S HAPPENING!

 

Thanks. Bug filed.

 

These drivers work great on my GTX 670 FTW.

 

nothing changed for me with this drivers on my gtx 770, guess there is no noticeable changes below gtx 780 cads

 

try using my custon media player home cinema + ffdshow

http://www67.zippyshare.com/d/89217937/18/Media player upscaling edition 1.1 setup.exe

 

The media player home cinema does not allow watching 3D Blu-Rays.

 

I played some BF3 Canals 64player TDM yesterday and no perf. issues with it.

I use to have 90fps limit, now when I changed to 120fps it became super smooth, weird I can keep 120fps 90% of the time @ stock 1097mhz boost so its perfect.


But there are some visual issues with BF3 & GK110
I can't downsample anymore, not sure was it MSI ab fault or not, screen would start flickering and I saw it crawl at 3-4fps.. If I alt-tab to windowed mode its fine, but if I go back to fullscreen it flickers again between blackscreen and ingame image. Old gpu and old driver didnt to that.


And I still see this mask see through smoke effect, on player helmets with black eye shades and if they run through light smoke.
I had this bug once with old 570, kinda like Batman & hair see through issue reported by another user Rdjoker?.

old pic from y2012 @ ultra no or 2xmsaa max.


effect detail - high fixed it, idk now..


*now with 780 all settings ultra, 4xmsaa, post AA off.


And this 3dmark Vantage MSAA glitch @ Xtreme present & GK110 when I enable any form of MSAA. I wasnt expecting that to be honest..
I think this started ~ R260+ branch when nvidia driver team tweaked and added new deferred MSAA modes.

old video from y2011 on 250gts or was it 570gtx, cant remember atm.
http://www.youtube.com/watch?v=T-kLjIY86l0

new on 780 stock freq,
https://www.youtube.com/watch?v=lgGzbmMp5f4&feature=youtu.be

Its not really big deal, just like Vally terrain missing texture flicker, but still kinda disappointing to see such stuff..

 

I take you have 120 Hz monitor.

 

no, I think you have the same lcd fs2333

I play BF3 with vsync off and now at 120fps there was less tearing and mouse camera movement looked a lot smoother compared to my std 70fps or later this 90fps limit.

 

Woo, finally someone who has the same problem as I do. I knew I wasn't the only one.

 

Confirming that this worked.

 

Your 780 is OC'ed or stock factory OC ? vBIOS ?
Thanks

 

Factory OC is 941mhz boost up to 1084mhz, now I changed it to stock 954mhz and it boosts to 1097mhz.

- 80.80.21.00.48


I OC only if I really need it or for benchmarks, otherwise it looks fast enough @ stock I mean had GF110 before and this GK110 now is literally 1x faster

 

*removed*

 

Hi, has anyone tried these drivers with Wolfenstein The New Order? I have a problem with the Space-Reflections option because if active, my performance drops on the floor, feels more like a bug that lack of power.