Quadro 320.49

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by ati666, Jul 15, 2013.

  1. ati666

    ati666 Master Guru

    Messages:
    465
    Likes Received:
    0
    GPU:
    Gigabyte R9-290x Windforc
    New in Release 320.49:

    ODE Driver
    The R319 drivers are the fifth ‘Optimal Drivers for Enterprise’, a release dedicated to relatively long term stability for ISV certification, OEMs, and Enterprise customers.
    Workstation Features
    NVIDIA Control Panel
    Display Category - Set up Multiple Displays Page Lock Clone Region control - new control lets you specify a section of a "pan and scan clone" source display to be cloned and locked. Once locked, you cannot dynamically pan the area. Lock Clone Region is available only with NVIDIA Quadro 2000(D) and later products (including corresponding K-series). Unlike pan and scan clone mode, the Lock Clone Region feature is not supported on Quadro 600/K600 or NVS products.
    Pan and Scan Clone Mode was introduced in R300 drivers. It is similar to regular Clone mode except that the two displays are different resolutions. The display with the larger resolution is the source clone display. The display with the smaller resolution shows a cropped section of the cloned source display. Pan and Scan Clone is available only with NVIDIA Quadro 600 and later products (including corresponding K series), NVS 310 and later NVS products, and Windows 7 and later Windows operating systems.
    NVIDIA Control Panel -> Workstation Category -> Set Up Mosaic Page --Control Display - You can now set up a control display that is separate from the Mosaic configuration
    Multiple Mosaic Groups
    Provides multiple Mosaic/Premium Mosaic topologies to be active on a single system. Configurable using the ConfigureMosaic tool.
    GPUDirect for Video - improved GPUDirect for Video performance on Premium Mosaic configurations.
    New NVIEW version - 140.62
    Revised the UI to incorporate a navigation tree instead of tabs.
    New Bird's Eye View starting page
    New Grid Line Editor controls
    NvWMI 2.12
    NvWMI is a WMI-based interface for configuring enterprise systems.
    Added support for Quadro Sync.
    Added support for GPU Power Management --Added method to query the serial number of a board
    NvAPI
    Added APIs to configure sync delay (skew and start delay) in lines and pixels.
    Workstation application compatibility fixes. Please read the release notes for more information on product support, feature limitations, driver fixes and known compatibility issues.
    If you would like to be notified of upcoming drivers for Windows, please subscribe here.
    Existing Support:

    Support for CUDA 5.0
    Support for OpenGL 4.3
    Support for the Open Computing Language (OpenCL) 1.1 in Quadro FX Series x700 and newer as well as the FX4600 and FX5600
    Support for DirectX11
     
  2. ati666

    ati666 Master Guru

    Messages:
    465
    Likes Received:
    0
    GPU:
    Gigabyte R9-290x Windforc
  3. ati666

    ati666 Master Guru

    Messages:
    465
    Likes Received:
    0
    GPU:
    Gigabyte R9-290x Windforc

Share This Page