Ok guys, bought 2x 74gb raptors, very nice and heavy hard drives... I installed them with the Vantec Vortex 5.25 bays for more cooling (running 38 C both) and i install raid... I used nLite to integrate the sata drivers to a modded windows CD (since i dont have floppy)... ok... i set up the raid to strip, 32k and add the 2 drives... now i install windows, everything goes smooth and it copies all the files... Windows starts and start the setup, copies all the files ok, i set up network, blah blah blah... restarts and as soon as windows starts normally, i get a BSOD with error 0x0000007e with no driver errors... Tried underclocking, factory default settings, upping voltage and no luck... BUT if i boot in Safe Mode it does boot and start windows, i check device manager and everything is ok... but as soon as i go to normal windows, poof... BSOD Any suggestions?