1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Power limit back to 100% after reboot.

Discussion in 'MSI AfterBurner Overclock Application Discussion' started by xixou, Jul 14, 2019.

  1. xixou

    xixou Member Guru

    Messages:
    119
    Likes Received:
    0
    GPU:
    inno3d 1070 3x (4)
    One of the two graphic cards (nvidia) get's its power limit set back to 100%,
    I've got the same issue for last 2 months, never had this issue for years before.
    really not good for mining (I set power limit around 70-80% normally).
    Any clue?
    I use MSI afterburner v4.6.2.15631 beta 1 (had same issue with previous beta release).
    I use windows 10 version 1903. <- Is that the guilty?
    Nvidia driver 431.36 (same issue with previous driver)
    I have the same effect on 4 different machines.
     
  2. xixou

    xixou Member Guru

    Messages:
    119
    Likes Received:
    0
    GPU:
    inno3d 1070 3x (4)
    I have ticked the locker and that seems to solve the problem.
     
  3. Andy_K

    Andy_K Master Guru

    Messages:
    403
    Likes Received:
    29
    GPU:
    MSI GTX 960 OC
    [​IMG]

    At least you found the solution. By chance... did you read the pop-up tool tip of the locker icon?
     
  4. xixou

    xixou Member Guru

    Messages:
    119
    Likes Received:
    0
    GPU:
    inno3d 1070 3x (4)
    I wrote the french translation ^^
    The lock is supposed to prevent any change of the settings by mistake,
    not to prevent the settings not to be properly loaded on next startup.
     

  5. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,264
    Likes Received:
    1,321
    It has zero relation to "not properly loading settings at startup" and it doesn't fix that this way, that's the _only_ comment I'll leave here
     
  6. xixou

    xixou Member Guru

    Messages:
    119
    Likes Received:
    0
    GPU:
    inno3d 1070 3x (4)
    Indeed, that was i told, but it solves the issue at my side.
     
    Last edited: Jul 17, 2019
  7. xixou

    xixou Member Guru

    Messages:
    119
    Likes Received:
    0
    GPU:
    inno3d 1070 3x (4)
    Problem appeared once this week with the lock on one machine,
    so that helps but this is not enough.
     

Share This Page