Please help me with my DDR4 memory OC

Discussion in 'Processors and motherboards Intel' started by Phroster, Apr 30, 2017.

  1. Phroster

    Phroster Master Guru

    Messages:
    303
    Likes Received:
    13
    GPU:
    Inno3D 4080 RTX
    I have issues with my memory when I use the XMP profile for DDR4 @ 3200 mhz.

    Even when I manually setup the memory. With all the timings filled in manually and also the voltage @ 1.35v.

    The problem is that my PC doesn't do a normal warm reboot with the memory in 3200mhz. If I cold boot and then restart the system, the system shuts off for 2 seconds, and boots normally, the memory also works stable @ 3200 mhz.

    It is just that the boot isn't normal. The system doesn't perform a nice warm boot where everything stays on. All HDDs and LEDs shut off. It's like the system goes off/on very quickly when the memory is @ 3200 mhz.

    But if I set it to 2666mhz default with default timings.
    It boots normally.

    I even tried the memory in 1.4v but I don't want to go any further then that.
     
  2. Phroster

    Phroster Master Guru

    Messages:
    303
    Likes Received:
    13
    GPU:
    Inno3D 4080 RTX
    I'm sorry, but I found it out, was the BIOS, the newest one has this issue.

    Downgraded to F4 now it's good.
     

Share This Page