Performance on Arkham Origins on different sets

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by Danny_G13, Oct 25, 2013.

  1. Danny_G13

    Danny_G13 Master Guru

    Messages:
    789
    Likes Received:
    142
    GPU:
    KF2 3090 SG
    So I have been running, as some of you may remember, on July's Forcewares because they're the last ones to be stable for me.

    I did download the 331.58s for BF4 and aforementioned Origins but was too scared to try them given how unstable every driver set since July has been for me.

    However, curiously enough Origins runs completely fluid with absolutely everything at maximum for me with those older drivers.

    I'm not sure where I'm going with this, I just didn't expect 3 month old drivers to run a near November release completely flawlessly.

    I had them on standby in case the July release saw a huge loss of performance, but I've barely lost a frame.
     
  2. EdKiefer

    EdKiefer Ancient Guru

    Messages:
    2,762
    Likes Received:
    305
    GPU:
    MSI 970 Gaming 4G
    I ran the BF4 beta with 314.07 w/o any issues once it got patched up it ran pretty smooth .
    only issue is a pop-up saying your running old drivers .

    Not sure how retail will work, just have to see but no artifacts with old drivers .
     
  3. Cyberdyne

    Cyberdyne Ancient Guru

    Messages:
    3,582
    Likes Received:
    303
    GPU:
    2080 Ti FTW3 Ultra
    I'm using 331.58's with physx off, everything else maxed.. Gets me about 80fps.
     
  4. SSJBillClinton

    SSJBillClinton Master Guru

    Messages:
    757
    Likes Received:
    123
    GPU:
    RTX3090 EVGA FTW
    This game runs amazingly well for me, everything maxed with 4x MSAA, 80FPS+.
    99% 780 usage, 580 physx gets to about 60% maximum.
     

  5. -Tj-

    -Tj- Ancient Guru

    Messages:
    17,478
    Likes Received:
    2,133
    GPU:
    Zotac GTX980Ti OC
    Last edited: Oct 26, 2013
  6. ShadowDuke

    ShadowDuke Ancient Guru

    Messages:
    4,450
    Likes Received:
    752
    GPU:
    XFX Radeon RX 6600
    With GTX 670 and July's forceware is latest stable driver for you, i 1st would ask myself why and maybe its not the driver...weird enough, why is the new unstable?
     
  7. CalinTM

    CalinTM Ancient Guru

    Messages:
    1,641
    Likes Received:
    15
    GPU:
    MSi GTX980 GAMING 1531mhz
    My GPU heats like hell on this game. I get on normal physx, blur off, dof off, rest to max, with TXAA low, almost solid 75fps in the city, but in interiors with fights the fps drops to 40, i dunno why...it suppose to be more light in interiors than exteriors.
     
  8. Sajittarius

    Sajittarius Master Guru

    Messages:
    448
    Likes Received:
    56
    GPU:
    3090 Turbo 24G
    its probably the TXAA, i remember TXAA made my card run hot on Assassin's Creed III, lol
     
  9. moab600

    moab600 Ancient Guru

    Messages:
    6,422
    Likes Received:
    311
    GPU:
    Galax 3080 SC
    A Common fps drop is in pengiun ship fight, it does drop their massively with 3D Vision regardless settings however the problem is not hardware but UE3 engine.

    In borderlands 2 there was an area that fps auto drop to 30 if u look at it, but if u look around fps goes back to noraml, UE3 engine need to die already.
     
  10. yasamoka

    yasamoka Ancient Guru

    Messages:
    4,865
    Likes Received:
    251
    GPU:
    EVGA GTX 1080Ti SC
    I would say: Earth to Shadowduke :)

    On-topic: OP, no performance difference whatsoever? How does Origins look with respect to Arkham City?
     

  11. CalinTM

    CalinTM Ancient Guru

    Messages:
    1,641
    Likes Received:
    15
    GPU:
    MSi GTX980 GAMING 1531mhz
    Even with no AA the temps go crazy high...
     
  12. Spets

    Spets Ancient Guru

    Messages:
    3,232
    Likes Received:
    366
    GPU:
    RTX 3090
    Try turning ambient occlusion off.
     
  13. PhazeDelta1

    PhazeDelta1 Ancient Guru

    Messages:
    15,616
    Likes Received:
    14
    GPU:
    EVGA 1080 FTW
    Here's my settings. I found that turning TXAA to low and turning AO off give me better frame rates. I'm only about 10 mins in, but it a damn good looking game so far.

    [​IMG]
     
  14. dsbig

    dsbig Ancient Guru

    Messages:
    4,062
    Likes Received:
    43
    GPU:
    EVGA RTX 2070
    vsync is locking at 30fps for me.

    I even disabled in game and used nvidia inspector to set vsync and it still does it.

    although nvidia is vsync is smoother then in game vsync.

    with it disabled, fps is going between 50-60fps with everything set to max.
     
  15. PhazeDelta1

    PhazeDelta1 Ancient Guru

    Messages:
    15,616
    Likes Received:
    14
    GPU:
    EVGA 1080 FTW
    Try adaptive vsync. That's what i'm using and it's not locking my fps.
     

  16. Cyberdyne

    Cyberdyne Ancient Guru

    Messages:
    3,582
    Likes Received:
    303
    GPU:
    2080 Ti FTW3 Ultra
    @PhazeDelta1
    That's how my TXAA looks too, that background is 3d. It's still so jaggy and full of crawling. I don't think it's working, which might explain why you have better FPS.
     
  17. moab600

    moab600 Ancient Guru

    Messages:
    6,422
    Likes Received:
    311
    GPU:
    Galax 3080 SC
    what kind of fps u were getting with low txaa and HABO+? ur card similliar to mine and i get usually 70+, some areas it dips down but that probably due to ue3 engine issues.
     
  18. ggp759

    ggp759 Member

    Messages:
    37
    Likes Received:
    0
    GPU:
    Evga GTX 680
    During the game on some scenes the game locks to 30fps and the gpu usage is down to 50%. It will go up to 60 eventually but it is very annoying. Tried the framerate target from evga precision for 59fps and 60fps but this causes terrible tearing even with vsync on (in-game). Also changed power management in nvidia settings to "maximun performance" but nothing happens. GPU stis dips to 50% usage frequently. Any help? Thanks
     
  19. Prophet

    Prophet Master Guru

    Messages:
    828
    Likes Received:
    18
    GPU:
    Msi 680 Gtx Twin Frozr
    Scenes? Movie sequences? Thats normal for movies mate.
     
  20. ggp759

    ggp759 Member

    Messages:
    37
    Likes Received:
    0
    GPU:
    Evga GTX 680
    not movies actual gameplay
     

Share This Page