Discussion in 'Links' started by Emile, Jan 6, 2005.
set it back to 000 or the default value.
What should i change it to?
PCI Latency v3 build 3
Does anyone have a working link for version 3 build 3? It seems to have disappeared from the web.
this program rocks set my vga to 16 same as the agp host now no more lockups on my nforce 3 mobo
nevermind still get lockups :realmad:
I've tried the 3.1 v2 & it does not show my vid card.
PCI-E cards are not supported by this program (because its not needed). I thought it said so in the first post, but apparently not.
So its normal for it to not work for you, don't worry about it.
what should the latency be set on sound cards ? not onboard..
My PCI Latency tool doesnt recongnize my GPU
My PCI Latency tool doesnt recongnize my GPU, it recongizes everything else, but my gpu is missing. help please.
Try an older version. I use 2.1
I had the same problem but no one anwered (see above):thumbdown.
Anyway I got the solution from some other thread.
The newest version is 3.1, that doesn't detect my card but 3.0 does. I recommend that, because it's propably the newest one before the 3.1.
"PCI-E cards are not supported by this program (because its not needed). I thought it said so in the first post, but apparently not."
however it is mentioned at the bottom in the readme.html that isn't opened automatically after installing, bah
Be carfull older versions of PCI Latency Tool had a nasty bug (The tool didn't check if the devices reported by Windows are actually present in the system, and it turned out some of the reported devices were bogus, resulting in an instant lock-up). But now in my system the only buss shown is 000 my agp card is on 001???. and all the older versions seem to be gone.
I would like to get older version too.
This newest 3.1v2 doesn't detect my 7800Gs at all, so it's little hard to try to adjust latencies.
Version 3.1 v2 does not find my SiliconImage 0680 RAID-Controller (PCI of course) on a
P965-Motherboard. However Version 3.0 Build 3 does work perfectly (Found here ).
Seems to be a real issue, that the newest version does not find every installed Hardware...
With PCI_Latency_Tool_3.0b3.zip I am still getting the same display with only bus 000 and my agp card is on Bus 001?
perhaps the old install of 3.1 v2 has left a .DLL some where that I need to delete?
I have, however, found PCI Latency Tool v1.02 on an old hard drive if any one wants it, I could post it some where if that' even leagal.
This version let me configure my cards' latency just fine.
It would be nice to get chance to try that 1.02 latency tool, maybe it could help.
So if you could get it up somewhere.
PCI Latency Tool v1.02 good luck and be carfull this version had a bug that could crash to BSoD. :micro:
OK I reinstalled my nvodngov19147-[Guru3D.com].exe and now the Version 3.1 v2 is working great thanks JFZ
Somebody can help with my hardware?