PC Power LED doesn't turn off with PCI-E USB 2.0 card plugged in

Discussion in 'General Hardware' started by xShino, Jun 10, 2021.

Tags:
  1. xShino

    xShino Member

    Messages:
    19
    Likes Received:
    1
    GPU:
    RTX 2070 Super
    Motherboard: ASrock Z390 Steel Legend

    PSU: Corsair RM650

    PCI-E Card: https://www.amazon.de/gp/product/B002RL8V7E/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

    When this card is plugged in, the power LED of my PC chassis - which would normally turn off when the computer is shut down - doesn't turn off. Also both CPU_LED and RAM_LED turn red on the mainboard, when the PC is shut down.

    It doesn't matter if anything is plugged in into the PCI-E card. I normally wanted to try to use it for the mouse.

    Also, I didn't plug anything to the card for the power - it works without any cable. If I wanted to try, what kind of cable would I need?

    Thanks.
     
  2. Astyanax

    Astyanax Ancient Guru

    Messages:
    10,612
    Likes Received:
    3,889
    GPU:
    GTX 1080ti
    Last edited: Jun 11, 2021
  3. xShino

    xShino Member

    Messages:
    19
    Likes Received:
    1
    GPU:
    RTX 2070 Super
    @Astyanax

    I just checked again and every "WakeOn..." setting is disabled, even if the PCI-E card is plugged in :(

    Edit: Fast Startup is also disabled if you were wondering.
     
    Last edited: Jun 11, 2021
  4. Astyanax

    Astyanax Ancient Guru

    Messages:
    10,612
    Likes Received:
    3,889
    GPU:
    GTX 1080ti
    what is the output of powercfg /a
     

  5. xShino

    xShino Member

    Messages:
    19
    Likes Received:
    1
    GPU:
    RTX 2070 Super
    @Astyanax

    It says that everything is either not available, not supported or off.

    5 minutes ago I tried "powercfg -h off"

    Here is the output:

    Die folgenden Standbymodusfunktionen sind auf diesem System nicht verfügbar:
    Standby (S1)
    Die Systemfirmware unterstützt diesen Standbystatus nicht.

    Standby (S2)
    Die Systemfirmware unterstützt diesen Standbystatus nicht.

    Standby (S3)
    Die Systemfirmware unterstützt diesen Standbystatus nicht.

    Ruhezustand
    Ruhezustand wurde nicht aktiviert.

    Standby (S0 Niedriger Energiestand – Leerlauf)
    Dieser Standbyzustand wird von der Systemfirmware nicht unterstützt.

    Hybrider Standbymodus
    Standby (S3) ist nicht verfügbar.
    Der Ruhezustand ist nicht verfügbar.

    Schnellstart
    Der Ruhezustand ist nicht verfügbar.
     
  6. Astyanax

    Astyanax Ancient Guru

    Messages:
    10,612
    Likes Received:
    3,889
    GPU:
    GTX 1080ti
    reset the bios via the jumper and repost the powercfg /a state after.
     

Share This Page