Overclock Phenom II X6 1090T

Discussion in 'Die-hard Overclocking & Case Modifications' started by kaiodragon, Dec 3, 2011.

  1. kaiodragon

    kaiodragon New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    2x AMD Radeon HD6970 2GB
    Hi guys, i trying to put my CPU to 4.0 but i cant seen to do it the right way. i keep getting IRQL_NOT_LESS_OR_EQUAL after like every 30 min , what can it be ? wrong voltage ? my VID is 1.3375 V.
     
  2. IcE

    IcE Don Snow Staff Member

    Messages:
    10,693
    Likes Received:
    73
    GPU:
    Zotac GTX 1070 Mini
    You need to raise the cpu voltage considerably. 1.3375 is stock....Try 1.4-1.5 for stability. The fact you can survive for 30 minutes at a time is impressive though, you might even be able to do 1.38.
     
  3. slippy1010

    slippy1010 Active Member

    Messages:
    60
    Likes Received:
    0
    GPU:
    Sapphire HD6950 2GB
    On my 1100T I had to crank it up to 1.45 to make it stable.
    Which in return gave me 4125mhz

    Im running on air, with a 212+ push/pull setup.
    With prime running for 6hrs temp didnt go pass 48c
     
  4. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,111
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    from what I have seen 4.0 is very doable. crank up the voltage, stress test and watch the temps
     

Share This Page