Nvidia 522.06 CUDA 11.8 SDK

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by Krzyslaw, Oct 4, 2022.

  1. Krzyslaw

    Krzyslaw Master Guru

    Messages:
    309
    Likes Received:
    142
    GPU:
    RTX2080S SHUNT MOD
    MrX1980, Nopa, WhiteLightning and 2 others like this.
  2. Jefry_st

    Jefry_st Member

    Messages:
    22
    Likes Received:
    31
    GPU:
    Vega 8
    NVIDIA GTX 1660 TI
    Tropics demo 1.3 benchmark :
    driver 517.48 WHQL - FPS: 198.6
    driver 522.06 dev - FPS: 202.6

    +4 FPS. Not bad... plus get CUDA 11.8

    War Thunder (1080P all settings Ultra )
    driver 517.48 WHQL - 171.8 fps avg
    driver 522.06 dev - 174.1 fps avg

    +2.3 FPS
    also not bad
     
    Last edited: Oct 4, 2022
    MrX1980 and mapnam charun like this.
  3. Astyanax

    Astyanax Ancient Guru

    Messages:
    14,510
    Likes Received:
    5,890
    GPU:
    GTX 1080ti
    why might it?

    it has every supported quadro and geforce card.


    Froze almost immediately after install on 10 series, could be a good thing, i've been trying to track down a VRAM leak in Explorer.exe linked to leaking DXGKCompositionObjects.

    OpenCL works.
     
    Last edited: Oct 4, 2022
  4. Krzyslaw

    Krzyslaw Master Guru

    Messages:
    309
    Likes Received:
    142
    GPU:
    RTX2080S SHUNT MOD
    Didn't test it yet and look into it, so I wrote it might be needed.
     

  5. Astyanax

    Astyanax Ancient Guru

    Messages:
    14,510
    Likes Received:
    5,890
    GPU:
    GTX 1080ti
    an interesting deployment tho, the driver folder only has infs and nvi related dlls, it pulls the rest down from the internet after you've decided what to install and begun the installation.
     
  6. andy rett

    andy rett New Member

    Messages:
    8
    Likes Received:
    3
    GPU:
    3090/16gb
    someone has tested on 30XX series =?
     
  7. GIBF4

    GIBF4 Active Member

    Messages:
    84
    Likes Received:
    4
    Hi, could you inform us on this as soon as you discovered (or repaired) the assumed VRAM leak?
    I too tend to have the same issue... Thanks in advance.
     
  8. Astyanax

    Astyanax Ancient Guru

    Messages:
    14,510
    Likes Received:
    5,890
    GPU:
    GTX 1080ti
    it works

    Windows 10 1904x?
    Can you recall when this started?

    As far as i can tell the leaks mainly occur while the system is idle, very little increases to the objects except when the windows interface changes or fullscreen media engaged.
     
    Last edited: Oct 4, 2022
    Sajittarius and andy rett like this.
  9. Pashka_ch1981

    Pashka_ch1981 Member

    Messages:
    24
    Likes Received:
    0
    GPU:
    Gigabyte RTX 3060Ti
    Potentially my go-to driver. Performance on par with 530.04&525.26 plus working OpenCL. So far no crashes or other issues.
     
  10. OniKeaton

    OniKeaton Master Guru

    Messages:
    244
    Likes Received:
    103
    GPU:
    3080 Ti FE 12GB
    The local installer is here: https://developer.download.nvidia.c...cal_installers/cuda_11.8.0_522.06_windows.exe

    Here's the standalone driver file (expanded and re-compressed, 598 MB): https://mega.nz/file/Ls8AQQoS#CTpsMYLTCoHa_ggkjPQ78YXko4LxmD4czTW5vj5ESIk

    Branch:
    r521_82-4
     
    Last edited: Oct 4, 2022

  11. CoolManiaC

    CoolManiaC Member

    Messages:
    12
    Likes Received:
    4
    GPU:
    RTX 2060
    Nice...522.06 Cuda performance like a last 530.04 Insider driver

    522.06 Cuda
    [​IMG]

    530.04 Insider
    [​IMG]
     
    Krzyslaw likes this.
  12. chinobino

    chinobino Maha Guru

    Messages:
    1,121
    Likes Received:
    63
    GPU:
    ASUS 2070 Mini OC
    Driver Date: 27th Sept 2022
    Branch: r521_82.4 <-- Is this new?
     
  13. dr_rus

    dr_rus Ancient Guru

    Messages:
    3,383
    Likes Received:
    647
    GPU:
    RTX 3080
    Yeah. This one will probably be released with the launch of 40 series cards.
     
    chinobino likes this.
  14. JEskandari

    JEskandari Master Guru

    Messages:
    268
    Likes Received:
    0
    GPU:
    GTX 3060 (95w)
    3 gb , thinking what they put in it, Cuda Toolkit ?
    before downloading it wonder if anybody can tell me if it work with laptops
     
  15. Krzyslaw

    Krzyslaw Master Guru

    Messages:
    309
    Likes Received:
    142
    GPU:
    RTX2080S SHUNT MOD
    On my side, working well with rtx2060 and rtx3060. In games I have like 1-2fps less then R530 driver in latest insider but it is full working and stable and ifvyou care opencl does work in this. Any way much faster than latest official in terms of framerate performance. Depend on game and location you can see gains from 5% to 10% more fps, maybe in some titles more.
     

  16. xV_Slayer

    xV_Slayer Active Member

    Messages:
    89
    Likes Received:
    37
    GPU:
    RTX 3090 FE
    Anyone using this driver see weird GPU usage in Task Manager? It is showing constant 3D usage ranging from 100% to spikes down to 50% and right back up to 100%. I am on the latest Windows 10 build 19044.2075.
     
    magic09 likes this.
  17. Neil79

    Neil79 Master Guru

    Messages:
    275
    Likes Received:
    128
    GPU:
    RTX 2070 SUPER
    Installed on my GTX 980, not on the 2070 yet
     
  18. ManuelG

    ManuelG NVIDIA Rep

    Messages:
    1,100
    Likes Received:
    548
    GPU:
    Geforce RTX 2080 FE
    If you decide to try out this driver, please feel free to share your driver feedback with us as our next Game Ready Driver will be based on R520 branch. Below is our display driver feedback thread.
    https://forms.gle/kJ9Bqcaicvjb82SdA

    Thank you.
     
  19. aufkrawall2

    aufkrawall2 Ancient Guru

    Messages:
    2,267
    Likes Received:
    752
    GPU:
    3060 TUF
    @ManuelG MPO stutter in madVR/mpv is still not fixed on Nvidia with these drivers. I just filled out the linked form again, even though I already sent various gpuview performance trace captures to you via email on November 17th 2021. I could verify that the Intel graphics driver does support MPO with three planes according to dxdiag output, while it does not suffer from the stutter issue, unlike Nvidia graphics cards. So I wonder why it proves to be such an issue for Nvidia to fix this, or what's the issue? Would really appreciate some feedback, as I haven't received any ever since. I also reported the issue to mpv, but it doesn't look like it's getting picked up there. But why should it, when it looks to be an Nvidia driver issue (at least that's my conclusion from Intel apparently not being affected, despite them supporting MPO too).
     
  20. magic09

    magic09 Member

    Messages:
    32
    Likes Received:
    6
    GPU:
    2080 Super
    Hi Manuel and to everyone- I have the same thing task manager spikes up and down to 100 and down to 30 back up again. Weird thing is A. didn't start right away because I was checking because this happened with 530.04 I tried earlier so I had to uninstall it but after a few hours or at least not immediately. the next time I opened task manager it was there. It's showing dwm.exe as doing it and I spent the last hour trying to trace it down ending processes etc. switched from hdmi 2.1 back to displayport on my monitor--full shutdown power down and power cycle--g-sync flipped on and flipped off--driver dev mode on and off----nothing has worked. I am running a Rtx 3080 FE with an Intel 9700K for reference. first time I ever saw this was with 530.04 and I am on Windows 10 1944.2075

    edit: oh and I confirmed it's real at least with hwinfo and gpu-z. both showing actual gpu usage so it's not just task manager.

    Aufkrawall- MPO is disabled for me if I go above 120hz at 4k on my monitor or 10 bit color both with hdmi 2.1 and display-port does the same happen to you?
     
    Last edited: Oct 6, 2022

Share This Page