NV4x softmodding boom continues. Ability to enable hardware masked units with RC15.2!

Discussion in 'RivaTuner Advanced Discussion forum' started by Unwinder, Sep 28, 2004.

  1. zehoo

    zehoo Member

    Messages:
    17
    Likes Received:
    1
    GPU:
    GTX1080
    On my leadtek 400tdh it seems to do 12 and 6 after the hardmod. I took it to 16 (artifacted) and back to 12 and so far haven't noticed any stability problems. The quick benchmarks in cs source I was running didn't show any performance increase over 12, 5.

    Although my card o/c's to 410/900 and beyond when I cool it with extra cooling so I'm still happy ;-).
     
    Last edited: Nov 22, 2004
  2. Trace23

    Trace23 Guest

    My Leadtek Winfast A400TDH softmodded successfully without artifacts or lock-ups. I have OC it to 400/900 with no problems, but going beyond that caused lock-ups and rendering errors.

    $ffffffffff ---------------------------------------------------
    $ffffffffff NVIDIA specific display adapter information
    $ffffffffff ---------------------------------------------------
    $0100000000 Graphics core : NV40 revision A1 (16x1,6vp)
    $0100000001 Hardwired ID : 0041 (ROM strapped to 0041)
    $0100000002 Memory bus : 256-bit
    $0100000003 Memory type : DDR (RAM configuration 06)
    $0100000004 Memory amount : 131072KB
    $0100000005 Core clock : 399.000MHz
    $0100000006 Memory clock : 450.000MHz (900.000MHz effective)
    $0100000007 Reference clock : 27.000MHz
    $010000000b HW masked units : pixel 0100b, vertex 001000b
    $ffffffffff ---------------------------------------------------
    $ffffffffff NVIDIA VGA BIOS information
    $ffffffffff ---------------------------------------------------
    $1100000000 Title : WinFast A400 VGA BIOS
    $1100000002 Version : 5.40.02.12
    $1100000001 BMP version : 5.28
    $1100000100 BIT version : 1.00
    $1100010000 Perf. level 0 : 325MHz/350MHz/1.20V
    $1100020000 VID bitmask : 00000011b
    $1100020100 Voltage level 0 : 1.10V, VID 00000000b
    $1100020101 Voltage level 1 : 1.20V, VID 00000001b
    $1100020102 Voltage level 2 : 1.40V, VID 00000010b
    $1100000003 SW masked units : none
     
  3. mrmelee

    mrmelee Guest

    I purchased the BFG 6800 OC 128 sn:"D33058" and it has no problems enabling it's pipelines or vertex units with rivatuner 15.2.

    Unfortunately my 6th vertex unit is ruined, but my other 4 pipelines seem to be performing flawlessly. (16x1,5vp) Gives me a good performance gain.
     
    Last edited by a moderator: Dec 15, 2004

Share This Page