NV3x / NV4x statistics needed

yup, well 19.9%

 

XFX 6800 GT
-------------------------------------------------------
256-bit NV40(A1,16X1,6VP) with 256MB DDR

Reg 000010F0:81e003ff
Reg 000015F0:00000000
Reg 000015F4:00000000
Reg 000015F8:00000000
-------------------------------------------------------
The fan is software controllable, but the speed remain the same in 2D/3D.
I can use Expertool from Gainward to set the fan speed. The speed set through Expertool match with that reported by rivatuner.
Here are the content of the register 10F0 for different fan speeds:
50% -> 820003FF
60% -> 819a03FF
70% -> 813303FF
80% -> 80CD03FF
90% -> 806703FF
100% -> 800003FF
The content of the other registers don't change.

 

Prolink GF6600GT 128MB DDR3

128-bit NV43 (A4,8x1,3vp) with 128MB DDR

Reg 000010f0 : 00007fff
Reg 000015f0 : 00000000
Reg 000015f4 : 80000000
Reg 000015f8 : 000000ff

 

BFG 6800NU OC Unlocked @ Stock
Using Expertool Dynamic fan speed to control fan

256-bit NV40 (A1,16x1,6vp) with 128MB DDR

Reg 000010f0 : 803e03ff
Reg 000015f0 : 00000000
Reg 000015f4 : 00000000
Reg 000015f8 : 00000000

Hopefully u can make use of these data to a better rivatuner

 

Sparkle 6200 AGP (4 pipes unlocked)

128-bit NV43 (A2,8x1,3vp) with 128MB DDR

Reg 000010f0 : 00007fff
Reg 000015f0 : 00000000
Reg 000015f4 : 00000000
Reg 000015f8 : 7fffffff

 

128-bit NV43 (A2,8x1,3vp) with 128MB DDR

Reg 000010f0:00007fff
Reg 000015f0:00000000
Reg 000015f4:80000000
Reg 000015f8:000000ff

Sorry, I'm a noob and don't know how to check if my fan is temp controlled. I don't think it is but agian, not 100% sure

 

By your command

256 Bit NV40 (A1, 16x1, 6vp) with 256Mb DDR

Reg 000010f0: 819a03ff
Reg 000015f0: 00000000
Reg 000015f4: 00000000
Reg 000015f8: 00000000


Fan speed is software controlled

Except it isn't because it is now water cooled using Koolance VID-NV2-L06 water block.

 

128-bit NV43 (A4,4x1,3vp)

I don't have a software controled fan
But who i see this reg ?
im noob
I Need know if my 6200 does the softmod