No voltage tweak with cat 10.2

Discussion in 'MSI AfterBurner Application Development Forum' started by Princess_Frosty, Feb 18, 2010.

  1. Princess_Frosty

    Princess_Frosty Master Guru

    Messages:
    624
    Likes Received:
    0
    GPU:
    MSI GTX580 Twin Frozr II
    I've had to mess around uninstalling and installing stuff all tonight to get the new cat 10.2 package working, messing about uninstalling visual web developer since there are STILL bugs with that and installing the cats...anyway thats a different problem.

    I've gone to reinstall the 1.41 version of Afterburner I've been running without problems but now I cannot change the core voltage on my 5970, everything else seems to be OK except for the shader clock which has never worked!

    I've just tried 1.50 as well and it's not working there either, this was all fine before tonights updates.

    Im running Win7 x64 with full admin privilages, any advice?
     
  2. lmimmfn

    lmimmfn Ancient Guru

    Messages:
    10,475
    Likes Received:
    158
    GPU:
    AorusXtreme 1080Ti
    gradually increase the slider, i volt increased and clicked apply but it reset, so i increased it a bit gradually and got it back upto 1.23 volts

    Im on afterburner 1.4 btw

    You cannot change the shader clocks on ATI cards
     
    Last edited: Feb 18, 2010
  3. Princess_Frosty

    Princess_Frosty Master Guru

    Messages:
    624
    Likes Received:
    0
    GPU:
    MSI GTX580 Twin Frozr II
    I can't the whole voltage slider is grayed out, and doesn't have a value in the box on the right either.

    It used to work fine so something has changed and broken it, i've tried a reinstall of afterburner both the 1.41 which previously worked fine and the 1.50 and both have the same problem.
     
  4. lmimmfn

    lmimmfn Ancient Guru

    Messages:
    10,475
    Likes Received:
    158
    GPU:
    AorusXtreme 1080Ti
    did you make sure "EnableUnofficialOverclocking = 1" is set in the MSIAfterburner.cfg file in the Afterburner install directory? i know it shouldnt be affected with a Catalyst upgrade but just to make sure.
     

  5. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    16,065
    Likes Received:
    3,655
    RTFM! From v1.5.0 release notes:

    - Now voltage control is also locked by default in safety options in advanced
    MSI Afterburner properties
     
  6. Princess_Frosty

    Princess_Frosty Master Guru

    Messages:
    624
    Likes Received:
    0
    GPU:
    MSI GTX580 Twin Frozr II
    OK thank you. It wasn't very obvious but i should have read the patch notes I guess, thanks.
     
  7. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    16,065
    Likes Received:
    3,655
    No problem, glad that you've got it working
     

Share This Page