tommy which bios are you using? there is a new one that came out 2 days ago http://hwbot.org/forum/showthread.php?p=101870#post101870 btw this is the best I can get out of it atm http://img705.imageshack.us/i/70superpi.png/
1.40v REAL should be ok. With so much built in vdroop or vdrop (whatever) it is wise too measure with dmm,not sure where easy read point on that board is thuo... I have to because it overvolts so much with ll2 set on this board,but has alot of vdroop set on auto or ll1....i miss dfi and thier set it and thats what it is goodness.
I need to set llc on very high. 1.355v in bios for 4.8 ht on. after 4.8 it looks like I have to start jacking up the volts. its 1.336v full load IBT I`m going to post some of the other voltage setting that are on auto like cpu pll to make sure they arent overvolted to much there are like 5 settings that concern me. flashed the new bios the bios is very easy to navigate with a mouse all power saving junk are disabled, as is turbo boost 1 step lower in volts from 1.355v in bios results in a blue screen. core temps are in the mid 60`s ht on 4.8 ht off they are around 60c
There should be not much to concern with voltage settings wise vcore vtt ddrv llc and sytem agent <maybe is all thats needed.(someone correct me if i'm wrong)you might have to have pll overvoltage set to find out your max multi. on the bios without that option on my b2 ud7 board i(all) had no go over 48x at all,so it was needed. Not sure if asus is different in that reguard.
So all them volts on auto aren't going to hurt? Yeah I have the pll. Overvoltage setting. Its on auto. For up to 4.8 it should be disabled? Over 4.8 enabled. That why I had no luck over 4.8 lol
I got 4.8 ht on/off saved as 2 profiles is ht after 4.8 still possible? or is the clock speed too high for ht
Wow, did I luck out...kinda. My replacement Asus P8P67 board shipped on the 8th but it arrived with a visibly skewed PCI-E slot, making it unusable. When I called my buddy at the store, he authorized an immediate return shipping and said he'd make it up to me. 2 days later I received a Sabertooth replacement board! He knew the ST was my 1st choice for a board but I was also a tad cash strapped ATT, so he made it up to me with this ST at no extra charge, Overnight Express too...:heh: Did the rebuild last Teusday, using stock cooler FTM, but after doing one BR encode the other day with OC @4.5, I quickly realized I needed a better cooler. On the encode pass my cores pegged @ 100% and my temps skyrocketed to over 87C Shut-r-down...clocked it back to 3.8 and I could finish with temps @ 67C, and still cut the time to encode it x5. Love it, from 34hrs on core2 Duo to just over 7hrs now. Ordered an Antec Khuler H20 620 closed loop liquid cooler last night and knowing my bud at the store, it'll prolly be here by Tues. Can't wait! Been reading allot of good stuff on that cooler, right on par with the Corsair H70 but MUCH quieter, I think it'll do the trick. Anyone needing better cooling and maybe checking out a closed loop cooler, take a very hard look at that Antec H20, very impressive results across all the better test sites.
wow I got 41,375 physics off vantage 03 140,382 06 33,686 no more cpu bottleneck like with my qx9650@4
I already ordered an ASRock P67 board because I couldn't get my hands on an Asus, but for anyone still looking, Newegg just added some inventory on the ASUS P8P67-M PRO (REV 3.0) here http://www.newegg.com/Product/Product.aspx?Item=N82E16813131707, so hurry up and grab one while they're there.
true mabe a good macro board if thats what you need. good luck with your asrock board they sell out fast.