1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help OCing 580 Strix

Discussion in 'Videocards - AMD Radeon' started by BitBleed, Sep 4, 2018.

  1. BitBleed

    BitBleed New Member

    Messages:
    9
    Likes Received:
    2
    GPU:
    RX 580 Strix OC
    I tried almost everything

    I can't OC past 1415~1430 Mhz
    I'll get artifacts in heaven bench

    I'm running at 1430/2125 and 1200 on core volts , Temps reach around 65c max on Heaven
    Power limit is also set to +50%

    HALP !
     
  2. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    11,308
    Likes Received:
    825
    GPU:
    1080Ti H20
    Either increase volts or reduce temps drastically by going water cooling.

    There is no magical fix for hardware reaching its limits(artifacts)
     
    cryohellinc likes this.
  3. pimpineasy

    pimpineasy Master Guru

    Messages:
    210
    Likes Received:
    6
    GPU:
    1050ti/Rx570
    You can only go so far with software overclocking.. The cards bios has clk setting for the ddr also they dont run the ddr at max volts according to jdec. Bios has a lot more option. If you want to become extreme oc you gonna need to learn to do cooling, solder & bios mod
     
  4. bernek

    bernek Maha Guru

    Messages:
    1,395
    Likes Received:
    12
    GPU:
    RX580 / 8GB
    And what is to achieve from these mods ? 1500 MHz on the GPU ?
     

  5. pimpineasy

    pimpineasy Master Guru

    Messages:
    210
    Likes Received:
    6
    GPU:
    1050ti/Rx570
    not worth it between the buggy drivers & Polaris was doomed because it was a rebadge die srink of r9 failure not enough core count bad power draw midrange card over msrp. not much of improvement from 1050ti. unless your trying to compete for number 1 on the list. i would just buy a used 1080 1070 or ti
     
  6. BitBleed

    BitBleed New Member

    Messages:
    9
    Likes Received:
    2
    GPU:
    RX 580 Strix OC
    Please don't ...
     
    bernek likes this.
  7. BitBleed

    BitBleed New Member

    Messages:
    9
    Likes Received:
    2
    GPU:
    RX 580 Strix OC
    I got it figured out . I'm using AfterBurner , 93+ volts , 1450/2200 and stable on Unigine Heaven and Furmark

    Thanks for your advices guys
     

Share This Page