My Pny Verto Geforce6600gt Slow!!

Discussion in 'Videocards - NVIDIA GeForce' started by dp911, May 28, 2005.

  1. dp911

    dp911 Guest

    i dunno why but, when i ran counter-strike my fps was WAAAAY lower than the fx5200. I lagged like crazy lag. Someone in the game also said that my processor speed has to be compatible with the card. I have a pentium 4 1.8ghz. i want to know if thats true or not. And also, if its not, i want to know if the driver i installed was just not good.
     
  2. deathvirus

    deathvirus Ancient Guru

    Messages:
    4,507
    Likes Received:
    13
    GPU:
    RTX 2070 MaxQ 8GB
    whats settings are u playing the game at ??? below 1024x768 ur card will be quite bottlenecked by the processor .... also try changing to drivers like 76.44 and better ....
     
  3. dp911

    dp911 Guest

    ???im playing game at 800x600. Shouldnt that give me good fps?? and also i will take your advice and download 76.44 right now
     
  4. MellowMan

    MellowMan Member

    Messages:
    22
    Likes Received:
    0
    GPU:
    6600 GT @525/1.1Ghz
    make sure you run drivercleaner b4 installing new drivers.
    also set agp aperature to 256.
    also check your vsinc, and AA/AF settings.
     

  5. fastvfr

    fastvfr Ancient Guru

    Messages:
    2,514
    Likes Received:
    0
    GPU:
    Gigabyte GeForce 6800GT, OCed
    Try setting the screen res to 1024x768.

    Oh, and make sure The Anti-Ailiasing and Anisotropic Filtering aren't set sky-high, too.

    That 6600GT ought to be at LEAST 5X faster than your old FX5200!
     
  6. dp911

    dp911 Guest

    how do i set agp aperature 256? can i use that even if i have agp 4x? also for AA and AF, is it good if i turned them off?
     
  7. papasmurf2217

    papasmurf2217 Active Member

    Messages:
    96
    Likes Received:
    0
    GPU:
    BFG 6800 Ultra OC @ 435/1200
    Gotta set it in the bios. Most motherboards you hold down DEL when the CPU posts. But, since yours is older it may be F2.
     
  8. Burnt_Ram

    Burnt_Ram Guest

    Messages:
    5,921
    Likes Received:
    0
    GPU:
    Zotac GTX 1050 Ti
    atleast ! this is the second thread i've read that someone went from a 5200 to a 6600GT and the performance was terrible ... strange
     
  9. TheGamer

    TheGamer Maha Guru

    Messages:
    1,498
    Likes Received:
    1
    GPU:
    XFX 7900GTX 512MB GDDR3 @
    Turn the AA and AF to appl. controlled in the nvcp.......have connected that extra molex connector to your card??
     
  10. orenda635

    orenda635 Ancient Guru

    Messages:
    6,849
    Likes Received:
    2
    GPU:
    BFG 7600GS 256mb / Radeon 9550 32mb
    Funny, My Geforce 6600 standard isn't as fast as it should be. It's at least 3.5x faster than my FX5200 but it's not getting the 3dMark03 points that Asus claims it should get. My CPU must be bottlenecking it. They claim 4850 but I can only get around 4050. My PSU could be too weak too.
     

  11. Burnt_Ram

    Burnt_Ram Guest

    Messages:
    5,921
    Likes Received:
    0
    GPU:
    Zotac GTX 1050 Ti
    your cpu has to do with it, but more so is your fsb. 333 fsb is alot slower than 400. so thats where your other 800 points are. allthough 3dmark03 is 90% GPU dependant, but the cpu/fsb certainly still plays a roll ...
     
  12. orenda635

    orenda635 Ancient Guru

    Messages:
    6,849
    Likes Received:
    2
    GPU:
    BFG 7600GS 256mb / Radeon 9550 32mb
    The XP2000 is outdated. Only has 266mhz FSB. Unfortunately I cannot afford an entire new system. Still, I'm happy with the 6600's preformance so far.
     
  13. dp911

    dp911 Guest

    uhhh... i changed my agp aperature to 256 and AA and AF to application controlled. It seems like my fps in counter strike just got WORSE! i dunno why. ALso, when i download the Xtreme G drivers my monitor blanks out. So i cant use those modified drivers. Does anyone know my problem!? or is it just my processor speed, fsb speed, and everything else like ram, thats making me slower?
     
  14. Mitch007

    Mitch007 Master Guru

    Messages:
    300
    Likes Received:
    0
    GPU:
    leadtek 7600GT AGP 600/780
    dp911, can you put down more system info...ram, mobo etc

    Also it that P4 a willamot or a northwood 256 vs 512 onboard cach memory..and is is 478 soket or 423?

    get CPUZ from this down load site and ruun it, include detail in a thread reply...
     
  15. Mitch007

    Mitch007 Master Guru

    Messages:
    300
    Likes Received:
    0
    GPU:
    leadtek 7600GT AGP 600/780
    make sure driver is not the issue, load up 71.89's and clean old ones out properly first!
     

  16. dp911

    dp911 Guest

    CPU Properties
    CPU Type Intel Pentium 4, 1800 MHz (4.5 x 400)
    CPU Alias P68, Willamette, A80528
    CPU Stepping D0
    Original Clock 1800 MHz
    L1 Trace Cache 12K Instructions
    L1 Data Cache 8 KB
    L2 Cache 256 KB (On-Die, ATC, Full-Speed)

    CPU Physical Info
    Package Type 478 Pin uPGA
    Package Size 3.50 cm x 3.50 cm
    Transistors 42 million
    Process Technology 6M, 0.18 um, CMOS
    Die Size 217 mm2
    Core Voltage 1.75 V
    I/O Voltage 1.75 V
    Typical Power 55.3 - 75.3 W (depending on clock speed)
    Maximum Power 72 - 100 W (depending on clock speed)

    ----------------------

    also i dont think i can download the 7x.xx versions! i dont know why but everytime i download one and i restart, my monitor blanks out. So i gtta change to my fx5200 and delete the nvidia or xtreme version drivers
     
    Last edited by a moderator: May 29, 2005
  17. dp911

    dp911 Guest

    please i really need help!!!
     
  18. NvidiaFreak

    NvidiaFreak Ancient Guru

    Messages:
    4,769
    Likes Received:
    0
    GPU:
    ATI Radeon HD 7660D
    ok go to my computer and tell us how much ram u need because CS S need 512 of ram.
     
  19. dp911

    dp911 Guest

    i have 512ram! but i lag crazy even in normal CS
     
  20. dp911

    dp911 Guest

    OMFG! PLEASE SOMEONE HELP ME GOD! I GET 41 FPS IN CS:SOURCE! I GET 52 fps WITH FX5200!!! SERIOUSLY!! WTF IS THIS NONSENSE?!?! I DONT KNOW WHY BUT THE ONLY NEW DRIVER I CAN USE IS 76.44! EVERY OTHER DRIVER DOESNT WORK AT ALL FOR ME!!! GOD DAMN I NEED HELP!! AND NO! I DONT WANT TO RETURN CARD! I WANT IT TO WORK!
     
    Last edited by a moderator: May 29, 2005

Share This Page