MSI Afterburner 4.0.0 Official(2014-9-4)

Discussion in 'MSI AfterBurner Overclock Application Discussion' started by msi-afterburner, Sep 4, 2014.

  1. EdKiefer

    EdKiefer Ancient Guru

    Messages:
    2,448
    Likes Received:
    225
    GPU:
    MSI 970 Gaming 4G
    they both operate at same time and appear to be rpm linked too .though i have no way to test that .
     
  2. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    No. AB or any other software controlling fan via NV driver (such as NVInspector for example) will only control fan speed of single fan.
    You'll need additional fan control software to control both independently, it is not AB's job to access additional fan controller directly and new versions won't support it.
     
  3. famich

    famich Active Member

    Messages:
    92
    Likes Received:
    1
    GPU:
    GTX 780TI SLI@1250
    Hello,

    would it be possible to make a big blue default skin for AFB 4.0.0 ? I ve got the 4K monitor and the big skin is the right for me and I m kind of bored by a green one..
    /And I do not know how to change the color of the skin/

    Thanks ...
     
  4. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    Reinstall Visual C++ 2008 redistributables.
     

  5. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    You may decomiple any skin bundled with AB, alter it and compile it back. Skin compilation / decompilation instructions can be found in ./SDK/Doc folder.
     
  6. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    Define "crashing problems" in more details.
     
  7. km52

    km52 Member Guru

    Messages:
    101
    Likes Received:
    0
    GPU:
    EVGA GTX 1070 FTW
    @Unwinder:

    I'm sorry to bring this up again, maybe you just haven't seen my previous posting:

    Thanks for all the time and effort you put into AB and RTSS. :thumbup:
     
  8. cowie

    cowie Ancient Guru

    Messages:
    13,224
    Likes Received:
    306
    GPU:
    GTX
    Hey alex do you know if the ic's on the msi gamer 980 are read and write?
    If anyone knows you should lol
     
  9. a15995

    a15995 Member

    Messages:
    11
    Likes Received:
    0
    GPU:
    MSI N560GTX-448 OC/PE
    Repaired but still crashes...

    Repaired the vcredist_x86.exe installation from the Redist-directory but number 4 still crashes with the above error. Reinstalled number 3 and no crashes. I guess my GTX560 (NV-driver 340.52) is too old for that ****.

    Will try Again when and if a new version becomes available.

    Thanks,
     
  10. EdKiefer

    EdKiefer Ancient Guru

    Messages:
    2,448
    Likes Received:
    225
    GPU:
    MSI 970 Gaming 4G
    It not driver version , I was using 331.82 for all my testing with 4.0 .
     

  11. Astrix_au

    Astrix_au Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    MSI RX VEGA 64 Wave
    I was having issues with the latest patch on BF4 and Catalyst 14.9. I re installed BF4 and it didn't help then I had to revert to 14.4 and finally have it working again.

    Unfortunately now I can't control my fan in MSI Afterburner for my 1st GPU, If I select the second in the settings it's controllable. I tried re installing MSI AB but that didn't fix it.

    Any ideas how I can get this working without re installing Catalyst with might cause issues on BF4 again?

    [​IMG]

    Yesterday when I was having issues with BF4 both GPU RPM (Tachometer) were showing up in afterburner which it never did AFAIK.

    Now only the first GPU tachometer is showing up in Afterburner and not the 2nd GPU that has fan control at this time.... confused.

    [​IMG]

    In catalyst overdrive GPU #1 is displaying RPM and GPU #2 is displaying percentage of the fan from 20-100%.

    Don't know if this is linked but when looking at my GPU's in AIDA64 only the first GPU has WDDM1.3 the other doesn't have it.

    I just got a replacement for my old 290x I had 2x V308 version 1.0 GPU but this time they sent me a MSI 290x V308 version 2.2. This one isn't compatible with EK full water block i'm not happy about that over a faulty fan!

    The Bios aren't the same version too.

    GPU #1 V308 version 2.2 has a BIOS Version 015.043.000.004.000000

    GPU #2 V308 version 1.0 has a BIOS Version 015.042.000.000.000000

    Can this cause a issue? Should I update one of them or something?
     
    Last edited: Oct 3, 2014
  12. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    Contact MSI. They don't visit this forum frequently so posting it in MSI forum would be much better idea.
     
  13. Astrix_au

    Astrix_au Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    MSI RX VEGA 64 Wave
    ok thanks.
     
  14. pstlouis

    pstlouis Master Guru

    Messages:
    401
    Likes Received:
    1
    GPU:
    RTX 2080Ti Aorus Xt
    I read that on the MSI forum :

    So for last 24 hours i have been running precision X 16 on one of the pc's with the fan problem and so far its been fine no fan problem the other one however with afterburner on has done it twice today ...so now i am placing precision x on that too and see what happens so will let you know in the next 24 hours ....

    Do you think Unwinder that afterburner doesn't control the fan properly ? What is the problem in regard of precision X that seem to have no fan problem. :3eyes:
     
  15. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    I think that I don't comment misinformation. If you copy-paste rumors from different forums, try to read whole thread and quote info completely:


    "results are inconclusive re software

    Problem still occurs with either afterburner or precision x installed ..."
     
    Last edited: Oct 4, 2014

  16. EdKiefer

    EdKiefer Ancient Guru

    Messages:
    2,448
    Likes Received:
    225
    GPU:
    MSI 970 Gaming 4G
    What exact problem with fans are you having ?
    Cause it works fine here with MSI 970 gaming .
     
  17. Astrix_au

    Astrix_au Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    MSI RX VEGA 64 Wave
    I tweeted AMD and they gave me a fix! Now I can control both GPU's in percentage in MSI afterburner and I can see both GPU's tachometers in MSI AB as well.

    https://twitter.com/Astrix_au/status/517902932008660992

    [​IMG]

    [​IMG]
     
    Last edited: Oct 4, 2014
  18. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    Congratulations! ;)
     
  19. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,708
    Likes Received:
    1,795
    Creating the following profile for PA.exe will allow you to use raster 3D mode with this game:

    Code:
    [RendererOpenGL]
    Context					= 2
    
     
  20. Astrix_au

    Astrix_au Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    MSI RX VEGA 64 Wave
    The fix only works for me on 14.9 :( unfortunaly on 14.9 BF4 has stutters or hickups, 14.4 runs great but then I loose the fan controller.
     

Share This Page