1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

monitoring tab, fps 1%, 0.1%?

Discussion in 'MSI AfterBurner Overclock Application Discussion' started by 4_R_3, Jun 25, 2019.

  1. 4_R_3

    4_R_3 New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    gtx 1060 6gb
    i play apex legends and theres times that the fps is very different, such as during the drop.

    during the drop the fps dips low, then on the ground the fps rises.

    if i run fps 1% and fps 0.1%, they start counting from the ship drop and dont reset to the fps when onthe ground, so i turn off the benchmark then turn it back on when im on the ground to get the correct 1% and 0.1% values.

    is there a way to get the fps 1% and fps 0.1% to restart when it begins? i would like it to start over every 30 seconds. or every 15 seconds. erase the old values and start counting at the very beginning every 15 seconds, is there a way i can get it to do that?
     
  2. Unwinder

    Unwinder Moderator Staff Member

    Messages:
    14,222
    Likes Received:
    1,277
    Pressing <Begin benchmark recording> hotkey does that, it resets all benchmark stats and starts recoding it from scratch.
     
  3. 4_R_3

    4_R_3 New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    gtx 1060 6gb
    OK, thank you.
     

Share This Page