Kepler Bios Tweaker

Discussion in 'Videocards - NVIDIA GeForce' started by npdoss, Feb 9, 2013.

  1. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    11,502
    Likes Received:
    996
    GPU:
    3080Ti Strix H20
    working on it now. msi and evga are the same program, just different skins
     
  2. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    11,502
    Likes Received:
    996
    GPU:
    3080Ti Strix H20
    so under the boost clock states, you have a maximum and minimum for boost clocks. XBAR L2C GPC and SYS. One of these controls throttling, so if you were to go through each individually and set the minimum to the maximum, theoretically it should make sure the clocks dont lower when hitting 70c threshold. i set all of them to maximum and the only thing it did was get rid of my display under windows, safe mode worked fine though
     
  3. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    what about the bug in unwinders program? I`m more interested in that atm
     
  4. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    11,502
    Likes Received:
    996
    GPU:
    3080Ti Strix H20
    dunno what thats about. i somehow got it to apply for ram, + 600 mhz, and everytime i hit reset it wouldnt go back to + 0, it was stuck on + 600. maybe i reinstalled AB, that was a week ago
     

  5. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    I unistalled evga and used 3.0.3 instead of the newest, will try that out. I had the same problem as well clicking on an offset like 500 or so and it wouldnt go to zero. it would just stay at the offset. I flashed my memory clock speed today because of that.
    thanks
    its doing the same thing gpu 2 I can set an offet on the ram. gpu 1 anything I click on goes right to 0.
    Ill just keep evga precision for the on screen display and fan profile. I got the ram flashed to 7012 and Ill just leave it at that
     
    Last edited: Feb 10, 2013
  6. Agent-A01

    Agent-A01 Ancient Guru

    Messages:
    11,502
    Likes Received:
    996
    GPU:
    3080Ti Strix H20
    yeah it went away for me. i know its an issue with multigpu though, never had that with a single card.
     
  7. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    well good to know theres nothing wrong with my card.
     
  8. Bentez

    Bentez Maha Guru

    Messages:
    1,309
    Likes Received:
    1
    GPU:
    Palit GR RTX 3080
    This looks really useful. Is there any use guides for it? I'm a bit lost for what to put in the "boost states" & "Clock states" tabs. also unsure about the power control bit on the first tab??
     
  9. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    yeah, im not messing with any of that stuff until a proper guide is out. it was very useful flashing my memory oc. I already unlocked my cards with kgb and nvflash for windows
     
  10. Bentez

    Bentez Maha Guru

    Messages:
    1,309
    Likes Received:
    1
    GPU:
    Palit GR RTX 3080
    **** I think I've bricked my cards. I flashed them with similar settings from the first page and now I get blank screen when I boot. How can I flash back lol. Can I use Intel onboard graphics as main? I can here windows sounds so the machine is booting. Freaking out hear people. I'm such a fool for trying this!!
     

  11. Veteran

    Veteran Ancient Guru

    Messages:
    12,103
    Likes Received:
    21
    GPU:
    2xTitan XM@1590Mhz-CH20
    Make sure onboard graphics are set in your bios then take out your primary card.

    You may have to reflash from PCI-E slot 2 where the second card maybe.

    I dont know for sure, Ive never had this happen.
    I know you can reflash back using KGB but not sure about this Keplar unlocker as ive never used and unlikely to use it as i prefer the good old DOS based commands compared to GUI.

    You maybe ok, cards may not be bricked so just try relax abit.
     
  12. Bentez

    Bentez Maha Guru

    Messages:
    1,309
    Likes Received:
    1
    GPU:
    Palit GR RTX 3080
    Thanks vet just trying now..
     
  13. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    I would enable on board
    put 1 card in at a time.
    using nvflash in windows
    put your backed up bios in that folder
    stick nvflash in c drive
    open cmd prompt
    type cd c:/nvflash
    type nvflash --list
    nvflash -i0 romname.rom
    where 0 is your 670
     
  14. Bentez

    Bentez Maha Guru

    Messages:
    1,309
    Likes Received:
    1
    GPU:
    Palit GR RTX 3080
    OK ill try that now
     
  15. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    im guessing -i0
    that the single 670 would be 0
    it might be 1
    do the nvflash --list first to make sure
     

  16. SLI-756

    SLI-756 Banned

    Messages:
    7,604
    Likes Received:
    0
    GPU:
    760 SLI 4gb 1215/ 6800
    Bad timing here but it's one thing unlocking your card's voltages and power target /fan control, it's another thing altogether messing with the specific bios values which this program lets you do.
    I'd like to set my vram OC but i never did because what else does it mess with?
    kgb takes your stock bios and optimizes it, this lets you rewrite your own bios, different ballpark imo.
     
  17. Bentez

    Bentez Maha Guru

    Messages:
    1,309
    Likes Received:
    1
    GPU:
    Palit GR RTX 3080
    its f*cked, im in windows, when I open nvflash it just says press enter to continue a bunch of times then closes. its telling me format is: AND mask 0, or mask 0, AND mask 1, or mask 1
     
  18. SLI-756

    SLI-756 Banned

    Messages:
    7,604
    Likes Received:
    0
    GPU:
    760 SLI 4gb 1215/ 6800
    chill out, you can flash from dos with a pen drive using your onboard intel graphics or you can use another gpu if you can get hold of one to do it.
     
  19. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,110
    Likes Received:
    2
    GPU:
    2x 980Ti Gaming 1430/7296
    maybe the bios save didnt work right, if the bios isnt 100% correct it wont let you flash something about a checksum error. I had to save my bios several times. try d/l bios from the webs
     
  20. Bentez

    Bentez Maha Guru

    Messages:
    1,309
    Likes Received:
    1
    GPU:
    Palit GR RTX 3080
    I'm chilled. I'm just annoyed at myself. For rushing into this. Both cards are doing the same thing. I need to go to bed now. What's the best way to try and flash in dos?
     

Share This Page