Just overclocked to 3.49!!

w00t.. i jsut overclocked my p4 2.8 @ 3.49 and its still running cool @ 47c

http://valid.x86-secret.com/show_oc.php?id=101639



this is highest i go til i get ram with heatspreaders

 

sweet nice OC

 

glad to see you got the temp issue sorted out.

 

nice man , 3.49 ghz is nice on a P4 , ive just done my first AMD overclock, still playing around tho

 

i remember when i cranked my P4 2.4C up to 3.0...... those were fun times. think the highest i ever got that CPU was like.... 3.19Ghz or somethin like that.... but i don't think it ran too stable. it just couldn't get that last few mhz to get to 3.2 without probably having to do a bit higher voltage, which i didn't want to do.

 

Wow. Awesome Overclock. Nicely Done. Mabey you should do a overclock for me. Lol

EDIT - I think I may be posting this in the wrong place, sorry. My question is anybody able to make a 820 Pentium D (2.8Ghz) to something close to this, or were able to overclock that processor.

 

amazing Oc

and u have managed to keep the temps under control

cool

 

as they say..... the first processor of a certain core usually overclocks better than the later ones (my 2.4C was usually able to achieve a much higher mhz overclock than 2.6's and 2.8's of the Northwood series). don't remember if the first Prescott was 2.8 though.....

 

http://valid.x86-secret.com/show_oc.php?id=101710

3.57ghz now @ 47c



im getting water cooling soon then i can go up to 4ghz+

 

nice clock, especially on a Foxconn board :thumbup:

 

Nice OC

i can clock my p4 3.0 ghz up to 3.6 ghz and even higher but...

i can't change my multiplier. so that sux. And i can't use dividers. so that sux too. Only when i set my ddr400 to 333mhz i can overclock my cpu that high.

So now im not getting higher then 3300 mhz in the bios.

With systool i can hit 235 fsb = 3500 mhz (1:1)

 

yea i can choose my (?:?)

and from 133-199(*21)=??GHz

right now its 170*21 i cant change the 21 but i can still go up to 199*21=4ghz, im not doing this til i get my liquid cooling off tigerdirect.com

 

Nice OC... My 3yr old 2.6 P4 clocks to 3.25 Stable... it could get higer but it has a $15 HSF cooling it...lol

 

lol yea

 

nice oc bro push harder.

 

If only i could do that... :speed:

my next board will probably be an dfi lanparty with lotsss of overclock utilities!

 

eh? I'm using a Soltek mobo and I've pushed 273 FSB on my 2.6 P4. Stock is 200 since its a skt 478 I could puxh it higher... but temps impead me from acheaving higher clocks

 

Here is the same thing, maybe if i get better memories, but here in brasil its too expensive DDR 500.
I'm getting 3.4Ghz.

 

Heatspreaders do not better cool your RAM. The best thing you can do is take those heatspreaders off and have a case fan blowing cool air across your RAM. All heatspreaders do is make your RAM look good. Manufacturers are forced to put them on there because if they don't, then the average user will think that they are cheap and won't get them. I curse whoever started the whole heatspreader thing.

In addition, you have a decent overclock there. Keep pushing it and you could probably get it higher. Good luck.

 

isnt PC3200 RAM 400mhz? i cant get mine to run this high and i got 3200 512 and a 256. i use cpuid and it says 200mhz but its 400mhz ram and my motherboard supports this ram, i also put in my friends memory in my pc and vis versa and it shows his ram as 200mhz and not 400 on his HP FACTORY pc.. so iuno please help..