JONSBO M.2-20 M.2 SSD cooler comes included with a 20mm fan.

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Aug 1, 2022.

  1. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    45,125
    Likes Received:
    11,809
    GPU:
    AMD | NVIDIA
  2. Kaarme

    Kaarme Ancient Guru

    Messages:
    3,197
    Likes Received:
    1,993
    GPU:
    Sapphire 390
    14,000 rpm? I wouldn't want that thing anywhere near my PC. It would belong to my workshop, among the other power tools requiring hearing protection from the user.
     
    Venix, chispy, rl66 and 1 other person like this.
  3. rl66

    rl66 Ancient Guru

    Messages:
    3,520
    Likes Received:
    666
    GPU:
    Sapphire RX 6700 XT
    "your M2 is pretty cool, with this cooler"
    "???, I DON'T UNDERSTAND, TALK LOUDER, THE COOLER MAKE A BIT OF NOISE!!!"
     
    Venix, Kaarme and chispy like this.
  4. vestibule

    vestibule Maha Guru

    Messages:
    1,006
    Likes Received:
    397
    GPU:
    Radeon RX6600XT
    Looks like a complete cock up product to me.
    Lets face it, one heck of a lot of M2 slots will be underneath a gfx card in situ and a fink the clearance is just 6mm from the top of any pc-e slot to the belly of any card.
     
    chispy and Agonist like this.

  5. GlennB

    GlennB Master Guru

    Messages:
    260
    Likes Received:
    101
    GPU:
    Sapphire Vega 56 EK
    I have a 980 256 GB and it runs 43 Degrees tops with a simple heatsink added. I don't really understand where tne 90+ degrees come from.
     
    Undying and Agonist like this.
  6. Kaleid

    Kaleid Ancient Guru

    Messages:
    2,730
    Likes Received:
    296
    GPU:
    Gigabyte 3070 OC
    14k rpm? That calls for a deathpenalty :D :p (I'm obviously not serious...just pointing it out in case it's not clear..)
     
    Venix, chispy and vestibule like this.
  7. mdm

    mdm Active Member

    Messages:
    66
    Likes Received:
    28
    GPU:
    SAPPHIRE R9 FURY
    No no, read the post carefully.. It's 10% of 14.000 rpm - thus 1.400 rpm.
     
    Venix and Fediuld like this.
  8. Agonist

    Agonist Ancient Guru

    Messages:
    3,952
    Likes Received:
    1,069
    GPU:
    Dell 6800XT 16GB
    Guess you need this if you have a 3090 dumping heat directly onto a very fast 4.0 NVME you are hammering.
     
    chispy likes this.
  9. Kool64

    Kool64 Maha Guru

    Messages:
    1,435
    Likes Received:
    638
    GPU:
    RTX 3090
    that thing definitely won't fit under my 3090
     
    Agonist, chispy and vestibule like this.
  10. schmidtbag

    schmidtbag Ancient Guru

    Messages:
    7,000
    Likes Received:
    3,404
    GPU:
    HIS R9 290
    Haha that would be an even worse place to put it - it'd suck up all the shop dust. That's why many industrial PCs are fanless.

    This is really only suitable for a home server and nothing else. A legit server would have enough airflow where the SSD wouldn't need a fan.
     
    Kaarme and chispy like this.

  11. chispy

    chispy Ancient Guru

    Messages:
    9,438
    Likes Received:
    1,832
    GPU:
    MSI RTX 4090
    14,000 rpm lol , it reminds me of those little dentist drills / tools they use on you :D . It might sound like it !



    ** sorry just had too ... :D
     
    Kaarme and Undying like this.
  12. Undying

    Undying Ancient Guru

    Messages:
    20,283
    Likes Received:
    8,573
    GPU:
    RTX 2080S AMP
    yeah any simple heatsink will do the job.
     
    Agonist and chispy like this.
  13. fantaskarsef

    fantaskarsef Ancient Guru

    Messages:
    13,744
    Likes Received:
    6,729
    GPU:
    2080Ti @h2o
    Looks like it would work just as well with no fan, but no shroud around the heatsink. And with less energy and noise. I agree with you fellow gurus.
     
    chispy likes this.
  14. WeRoRa

    WeRoRa Member

    Messages:
    31
    Likes Received:
    15
    GPU:
    GTX 1070 8gb
    Well aparently PCI-E 5.0 m.2 nvme ssds are gonna be hot and it might be necessary to actively cool them if you want top notch performance. Also it is clearly written that it produces 24 dBA. With some manufacturer tomfoolery lets say its 28 dBA. Thats still quiet in comparison to most PCs out there.
    Also if its really that loud just slap a noctua 20x20 fan on to it. They spin with 5k at ~15 dBA which is pretty much inaudible. I think the reactions are over the top. I like the look. It's clean af :D
     
  15. Agonist

    Agonist Ancient Guru

    Messages:
    3,952
    Likes Received:
    1,069
    GPU:
    Dell 6800XT 16GB
    small.jpg
    This perfect. Its the 2nd slot on my board ironically, but works great with my 500GB 4.0 NVME.
     
    Undying likes this.

  16. Venix

    Venix Ancient Guru

    Messages:
    2,676
    Likes Received:
    1,388
    GPU:
    Palit 1060 6gb
    Is it only me ? That when I see crammed small airfans like that advertised it is an instant (do not touch ever ) label for me :p
     
  17. vestibule

    vestibule Maha Guru

    Messages:
    1,006
    Likes Received:
    397
    GPU:
    Radeon RX6600XT
    Just a heads up. I know you did not ask but that Riser Cable could be a real head ache! :)
    Nice looking rig so far. When its done could you post it up. :)
     
    Agonist likes this.
  18. BLEH!

    BLEH! Ancient Guru

    Messages:
    6,330
    Likes Received:
    337
    GPU:
    Sapphire Fury
    Hope you like 233.333333 Hz hum!
     
  19. Agonist

    Agonist Ancient Guru

    Messages:
    3,952
    Likes Received:
    1,069
    GPU:
    Dell 6800XT 16GB
    This is the before. Ended up swapping out the board, cpu block, RM 1000x, added a vertical gpu mount, 2 360mm alphacool rads, XSPC white coolant, better loop drain, and 7 antec fans.
    0201221603.jpg






    This is the finished one. No LEDS had been tweaked yet. I run a static blue.
    0521222005~4.jpg
    I have no issues with it so far. Works on 4.0 like its supposed too.

    Thank you. Been a lot of work lately to get it nice. Its actually done. Just was a photo from when i was putting together. I rarely see nice aoft tubing builds.

    Ill post up pics and specs later today after work.
     
    Last edited: Aug 4, 2022

Share This Page