1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Joled starts mass production of monitor OLED panels 10" to 32" next year

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Apr 10, 2019.

  1. Toadstool

    Toadstool Active Member

    Messages:
    85
    Likes Received:
    24
    GPU:
    Vega 64
    Is color cycling RGB crosshairs/HUD going to be the newest part of the RGB craze?
     
  2. Aura89

    Aura89 Ancient Guru

    Messages:
    7,575
    Likes Received:
    841
    GPU:
    -
    If done correctly, you likely wouldn't even notice the color cycling, so your intent on making it sound like you're going to have a crosshair and etc. going all RGB on you like it's a dance floor isn't valid. Color shifting to the next color in line left or right on an 8-bit panel with 16.7 million colors would be next to impossible to detect. Let alone on a 10-bit panel with 1.07 billion.

    Even a 6-bit panel would be difficult to see, but i would not be surprised if you could actually see it then. That being said, i'd be surprised if an OLED panel were ever to be a 6-bit panel
     
  3. Koniakki

    Koniakki Ancient Guru

    Messages:
    2,837
    Likes Received:
    437
    GPU:
    ZOTAC GTX 1080Ti FE
    Available with each oled monitor purchase!

    [​IMG]
     
    Last edited: Apr 13, 2019
    Richard Nutman likes this.
  4. zorandesign

    zorandesign Member

    Messages:
    17
    Likes Received:
    4
    GPU:
    MSI NX7600GT
    hehe, could be! :)
    The color should change in such a way that non of the subpixels will be on full brightness the whole time. It can be done in several ways, one of which is to have the LED turn off for a duration of 10% of the frames in total, or translated turn on and off few times within one second (or within the 60 fps that would be 6 frames being off). Our eye should not be able to notice much difference, probably will notice some dimming, if at all. I believe that will prevent burn-in because it will bring the subpixel led from zero to highest brightness and keep its integrity. I am just not sure if this method will reduce the lifespan of the OLED in other way.
     

Share This Page