1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to modify Msi Afterburner low power /idle/ memory clock ? Solved

Discussion in 'MSI AfterBurner Overclock Application Discussion' started by bobalazs, Sep 19, 2019.

  1. bobalazs

    bobalazs Member

    Messages:
    14
    Likes Received:
    1
    GPU:
    MSi R9 270 Gaming
    I'm trying to increase the default idle 300 Mhz memory clock of rx 570 with MSI AB. as it often causes graphical glitches. i edited voltage curve with control-F but i dont see any option to modify memory clocks, only the 3d clocks.
     
  2. bobalazs

    bobalazs Member

    Messages:
    14
    Likes Received:
    1
    GPU:
    MSi R9 270 Gaming
    Well i found a half-solution. I went to wattman settings and under global wattman-memory - STATE 0 Min STATE 1 STATE 2 Max
    i clicked STATE 1 and "set as minimum state"
    So that means i don't idle to 300 Mhz, but no graphics glitches at all no matter what i do. Power consumption however increased by about 7 watts (pulled from wall)
     

Share This Page