help with overclock

Discussion in 'Die-hard Overclocking & Case Modifications' started by spider666up, Jan 11, 2004.

  1. spider666up

    spider666up Guest

    hey guys i am trying to overclock my cpu i have a 2.4c800fsb and p4p800dx you can see all the stuff in the box well i had it running at 3ghz and about an hour after it just rebooted and it keeps doing that just wanted to no why do you think it is doing that the
    mem timings are 2,3,3,6 and the vcore 1.65 also i had to set the memory to 320mgz then set the fsb to 250 so the memory would be running at 400mgz that is the only way i cound do it the memory didnt want to go over 400mgz
     
  2. MiNI

    MiNI Ancient Guru

    Messages:
    2,957
    Likes Received:
    0
    Graphics Card::
    ATI 6950 unlock 950/1400
    i think u might have to up ur vcore a little more, if u keep getting random reboots, or u may try loosening ur ram timings.
     
  3. STeFaNo

    STeFaNo Guest

    You could set a CPU : DRAM divider to 5:4.
     
  4. spider666up

    spider666up Guest

    well i tryed to turn up the vcore and i did set the memory to 5:4 also set the timings to 2,4,4,6 but it still keeps rebooting i had it on for 6hrs running fine then it started rebooting i also turned of the automatic restart to see what the problem is and i just get the blue screen with a stop error meg so what could it be
     

  5. QuikBng19

    QuikBng19 Active Member

    Messages:
    60
    Likes Received:
    0
    Graphics Card::
    BFG 8800 GTX OC2 768MB (626/2000)
    Computers become unstable when you OC it to much. going from a 2.4 to a 3.0 can make you crash if you cant keep it cool. I took my 2.4 p4 to a 2.7 and it works fine. You really dont notice a difference from a 2.7 to a 3.0.
     

Share This Page