Giada a50 chipset install issue

Discussion in 'Processors and motherboards AMD' started by theimported1, Jul 11, 2011.

  1. theimported1

    theimported1 Master Guru

    Messages:
    516
    Likes Received:
    0
    GPU:
    980Ti SLI on EK Blocks
    Just bought a giada a50 mini-pc.
    Got all my drivers installed BUT the chip set.

    My issue is on the chip set install page where I have to select language I CANNOT hit the next button as it is off page due to the fact I cannot change the resolution until I install said drivers.

    Nothing works I cannot just get through hitting the enter button!

    Drivers are for a e350 apu.

    I have run into this many times before but usually can just hit enter and get through.

    Any ideas would be great.

    Thanks
     
  2. deltatux

    deltatux Ancient Guru

    Messages:
    19,051
    Likes Received:
    13
    GPU:
    GIGABYTE Radeon R9 280
    The A50 chipset doesn't need any drivers, it's supported by Windows Vista and 7 out of the box...

    As for the graphics drivers, the default resolution of either 800 x 600 or 1024 x 768 (you can select this via the Windows Vista or 7 VESA driver that comes out of the box) ... have you tried using 1024 x 768?

    deltatux
     
  3. theimported1

    theimported1 Master Guru

    Messages:
    516
    Likes Received:
    0
    GPU:
    980Ti SLI on EK Blocks
    Delta

    It needs graphics drivers.

    I bought these for 1080p content. It supports 1080p.

    It is the new e350 apu which supports 1080p.

    I cannot change resolution until drivers are installed.
     
  4. theimported1

    theimported1 Master Guru

    Messages:
    516
    Likes Received:
    0
    GPU:
    980Ti SLI on EK Blocks
    Anyone??

    I cannot install my graphics drivers due to this frustrating issue!

    All I need to do is be able to hit the next button, enter usually works but not this time!
     

  5. JerichoKru

    JerichoKru Member Guru

    Messages:
    194
    Likes Received:
    0
    GPU:
    HIS HD 6850 1GB
  6. deltatux

    deltatux Ancient Guru

    Messages:
    19,051
    Likes Received:
    13
    GPU:
    GIGABYTE Radeon R9 280
    I'm sure you can, the VESA driver should allow you to at least go to 1024 x 768. I built an E-350 APU media centre before and it allowed me to do so without any Catalyst drivers installed.

    deltatux
     

Share This Page