Game Ready Driver WHQL 465.89 download & discussion

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by valorex, Mar 30, 2021.

  1. Astyanax

    Astyanax Ancient Guru

    Messages:
    10,590
    Likes Received:
    3,877
    GPU:
    GTX 1080ti
    Your boot disk is MBR and doesn't have a uefi boot loader,

    thats where MBR2GPT comes in, it does both.
     
  2. Sajittarius

    Sajittarius Master Guru

    Messages:
    425
    Likes Received:
    47
    GPU:
    3090 Turbo 24G
    i had this issue with single monitor (no surround), but not at boot, only on screen wake from sleep.

    It almost looks like when HDR content is mapped incorrectly to SDR (like everything is super bright and washed out). Turning HDR on, or changing resolution fixes it.
     
    Last edited: Mar 31, 2021
  3. MIXXX

    MIXXX Member Guru

    Messages:
    173
    Likes Received:
    5
    GPU:
    EVGA 1070 GTX 8GB
    I will install these tonight and test!!
    PEACE
     
  4. ManuelG

    ManuelG NVIDIA Rep

    Messages:
    951
    Likes Received:
    336
    GPU:
    Geforce RTX 2080 FE
    Can you tell me what Shadowplay and NVIDIA Control Panel settings you changed from the default settings? I did get some feedbacks yesterday from a few users mentioning they were unable to launch games but I was not having any luck reproducing the issue. I'll give Global Image Sharpening a try and see if I can reproduce it.
     

  5. Brocius

    Brocius Member

    Messages:
    16
    Likes Received:
    0
    GPU:
    GTX 980TI
    I havent changed a thing, i just flashed my vbios and installed these drivers. REBAR is working but as soon as i enable overlay in GFE cyberpunk wont start. Also if i use sharpen in the nvidia control panel cyberpunk wont start, it only starts when i use sharpen in global settings in nvidia control panel but then sharpen is not working. Other games seem to be working btw
     
  6. ManuelG

    ManuelG NVIDIA Rep

    Messages:
    951
    Likes Received:
    336
    GPU:
    Geforce RTX 2080 FE
    Thanks. So you haven't changed any other settings in the NVIDIA Control Panel? Just the image sharpening?
     
  7. Mufflore

    Mufflore Ancient Guru

    Messages:
    12,784
    Likes Received:
    1,327
    GPU:
    Aorus 3090 Xtreme
    Its a trifle confusing, all my disks since about 8 years ago have been initialised as GPT.
    MBR boot is still allowed on top, restoring an MBR backup works fine, booting as MBR.

    However...
    A few years ago I installed Windows with a UEFI bootloader on one drive which gave me the different UEFI bootloader descriptor in the bios.
    Restoring the single main partition from an MBR backup to that drive (ie no bootloader was restored) then gave me the same UEFI boot loader for that OS.
    But when I turned CSM off, there werent any bootable partitions, I figured my knowledge was a bit short but didnt pursue it.
    This was a while back, perhaps there was a bug in the bios, I'll give it another try.
    I'm on a newer system now so I imagine less gremlins :)
     
  8. Brocius

    Brocius Member

    Messages:
    16
    Likes Received:
    0
    GPU:
    GTX 980TI
    Yes just to try out if that would work without GFE. But before the new drivers and vbios for REBAR cyberpunk would just start with GFE and i used GFE for the sharpen filter and not in the nvidia contol panel. Then i updated the vbios and drivers and not change anything and cyberpunk would not start.
     
  9. ManuelG

    ManuelG NVIDIA Rep

    Messages:
    951
    Likes Received:
    336
    GPU:
    Geforce RTX 2080 FE
    Can you update GPU-Z if its on an older version -> then put your PC into a repro state where Cyberpunk doesn't launch -> then once you confirm the game crashes when launching, launch GPU-Z and check if all of the features are showing up correctly as they should?

    https://i.imgur.com/41L8MXl.png

    If they don't, can you share a screenshot of what GPU-Z shows for your card? Also maybe email me your MSINFO32 file to driverfeedback@nvidia.com as there may be some software installed on your PC that installs its own virtual GPU drivers and it may be conflicting with the NVIDIA drivers somehow when ReBAR is enabled.
     
    Last edited: Mar 31, 2021
  10. cucaulay malkin

    cucaulay malkin Ancient Guru

    Messages:
    1,790
    Likes Received:
    870
    GPU:
    107001070
    let's hope
     

  11. tty8k

    tty8k Master Guru

    Messages:
    416
    Likes Received:
    108
    GPU:
    Ati 5850
    That was pretty much my situation too, disabling CSM showed no bootable drives because OS had MBR.
    The link I posted has a very straight forward and simple guide.
    Basically shows you how to boot into CMD mode in windows, and from there to use MBR2GPT command.

    There are also other ways in the guide but you only need to look at MBR2GPT one.
     
  12. Brocius

    Brocius Member

    Messages:
    16
    Likes Received:
    0
    GPU:
    GTX 980TI
    mmm it says i dont have Raytracing and DirectML
     

    Attached Files:

  13. windrunnerxj

    windrunnerxj Master Guru

    Messages:
    361
    Likes Received:
    58
    GPU:
    MSI Gaming 1060 6G
    I've tried launching Rise of Tomb Raider in DX12 mode and had no issues with it, with GFE overlay, Steam overlay and Xbox overlay working fine.
    NVCPL sharpening (in app profile) also works fine and GPU-Z shows that all features are supported.
    Looks like Pascal is unaffected and it's a 3xxx series issue?
     
  14. ManuelG

    ManuelG NVIDIA Rep

    Messages:
    951
    Likes Received:
    336
    GPU:
    Geforce RTX 2080 FE
  15. Mufflore

    Mufflore Ancient Guru

    Messages:
    12,784
    Likes Received:
    1,327
    GPU:
    Aorus 3090 Xtreme
    My point was, after creating a UEFI bootloader on the disk and restoring only the OS partition from an MBR backup, it booted as if UEFI still.
    But when CSM was turned off, there were no bootable partitions.
    It was no longer MBR but still wasnt valid.
     

  16. bobnewels

    bobnewels Master Guru

    Messages:
    208
    Likes Received:
    126
    GPU:
    RTX 3080
    @ManuelG
    Just my experience with new driver. Screen shot below showing my problem and it is not important at all, I can use any other Nvidia Driver with Motherboard BOIOS and all is normal.

    Unable to get DX12 games working on Nvidia Driver 465.89 . Resizable Bar is enabled

    DX12 /HDR not recognized by PC Games from resizable bar list . DX11 works fine in the resizable bar list PC Games
    DX12 PC Games will crash to desktop, fail to initialize or start with DX11 instead of DX12

    Two different Windows 10 builds- Tested supported games and non supported resizable bar games
    Windows 10 Insider Preview Build 21337
    Windows 10 Insider Preview Build 21343

    Asus Tug Gaming Z490 Motherboard Latest BIOS Beta 2210
    Asus Tuf RTX 3080 Latest vBIOS
    Intel 10850K

    Tried with/without Gforce Experience and uninstalled software such as MSI Afterburner/RTSS

    Nvidia Drivers 461.92/462.07 DX12/HDR PC games work fine .Resizable bar is also on in Nvidia Control panel but does not affect FPS that I can tell with any resizable Bar PC Game.

    nv.jpg

    Emailed MSinfo to driverfeedback@nvidia.com

     
    Last edited: Mar 31, 2021
  17. leandrofq

    leandrofq Member

    Messages:
    12
    Likes Received:
    0
    GPU:
    RTX 3090 MSI
    Sure, now im using gpu driver 461.72
    geforce experience 3.21.0.36

    465.89 is not working here =/
     
  18. n\/Cl34r

    n\/Cl34r Active Member

    Messages:
    55
    Likes Received:
    0
    GPU:
    Zotac 3080 Tri. OC
    Installed drivers and flashed Mobo BIOS, but Zotac is dragging their feet on the VBIOS release.

    Are we supposed to turn on HAGS aswell at this point? Last i heard was "performance impact is mixed, it introduces crashes aswell, leave it off".

    EDIT:
    Just to make it clearer, the Mobo BIOS was built in december 2020. Thats how long the necessary changes must have been final.
     
    Last edited: Mar 31, 2021
  19. TAGTRAUM

    TAGTRAUM Member

    Messages:
    10
    Likes Received:
    4
    GPU:
    Aorus Xtrere 3080
    I want to share an at last good experience with official GRD drivers (used dev drivers 470.05) - with enabled ReBAR and same settings in AC Valhalla and RDR2 i've got some stuttering, without ReBAR it works flawlessly, BUT in case of last chance for ReBAR i've turned on HAGS in recently updated Windows 21H1 (19043.906) and it works without any stutter, first time with all enabled options i've got zero stutters. So, i suppose that HAGS must be enabled or at least tryed on different hardware configurations
    My spec is 9900KS+Z390 Aorus Master+AorusExtreme 3080. Also got Z590 Master but can't find 11900K for now to test on latest generation
     
    cucaulay malkin likes this.
  20. ManuelG

    ManuelG NVIDIA Rep

    Messages:
    951
    Likes Received:
    336
    GPU:
    Geforce RTX 2080 FE
    Thank you. Got it. Are other users missing Ray Tracing and ML in GPU-Z also on Windows 10 Insider build? Also if you are running into this issue, please send me your MSINFO32 file from your PC and let me know if Hardware-accelerated GPU scheduling is enabled or disabled from the Windows display settings. You can email the MSINFO32 file to driverfeedback@nvidia.com.
     
    leandrofq and bobnewels like this.

Share This Page